(2R)-2-aminopentan-1-ol

Conditions: temp:110.01; pressure:0.00; stir:; See reaction.notes.procedure_details.

Procedure: 5-(Benzylthio)-7-chloro[1,3]thiazolo[4,5-d]pyrimidin-2-amine (6.0 g, 19.4 mmol) was dissolved in NMP (30 mL). DIPEA (8.4 mL, 48.5 mmol) and 2-amino-(2R)-1-pentanol (3.5 g, 33.9 mmol) were added and the mixture was heated to 110° C. for 4 days. After cooling to room temperature, the mixture was poured into water (200 mL). The precipitated product was collected by filtration, washed with water and used in the next step without further purification (7.0 g, 97% yield). After cooling to room temperature The precipitated product was collected by filtration washed with water used in the next step without further purification (7.0 g, 97% yield)

Conditions: temp:120.01; pressure:0.00; stir:; See reaction.notes.procedure_details.

Procedure: 1.4 g 2,4-dichloro-6,7-dihydrothieno[3,2-d]pyrimidine (II) are placed in 9 ml dioxane, then first 3.5 ml diisopropylethylamine, then 0.9 g D-norvalinol are added. The reaction mixture is heated in the microwave at 120° C., until there is no further reaction, and cooled, then evaporated down. The residue is treated with petroleum ether/ethyl acetate 9:1 in the ultrasound bath, the solid is suction filtered and dried. 1.5 g (III-3) are obtained as a solid. no further reaction cooled evaporated down The residue is treated with petroleum ether/ethyl acetate 9:1 in the ultrasound bath filtered dried 1.5 g (III-3) are obtained as a solid

Conditions: temp:110.01; pressure:0.00; stir:; See reaction.notes.procedure_details.

Procedure: 5-(Benzylthio)-7-chloro[1,3]thiazolo[4,5-d]pyrimidin-2-amine (6.0 g, 19.4 mmol) was dissolved in NMP (30 mL). DIPEA (8.4 mL, 48.5 mmol) and 2-amino-(2R)-1-pentanol (3.5 g, 33.9 mmol) were added and the mixture was heated to 110° C. for 4 days. After cooling to ambient temperature, the mixture was poured into water (200 mL). The precipitated product was collected by filtration, washed with water and used in the next step without further purification (7.0 g, 97% yield). After cooling to ambient temperature The precipitated product was collected by filtration washed with water used in the next step without further purification (7.0 g, 97% yield)

Conditions: temp:110.01; pressure:0.00; stir:; See reaction.notes.procedure_details.

Procedure: 5-(Benzylthio)-7-chloro[1,3]thiazolo[4,5-d]pyrimidin-2-amine (6.0 g, 19.4 mmol) was dissolved in NMP (30 mL). DIPEA (8.4 mL, 48.5 mmol) and 2-amino-(2R)-1-pentanol (3.5 g, 33.9 mmol) were added and the mixture was heated to 110° C. for 4 days. After cooling to ambient temperature, the mixture was poured into water (200 mL). The precipitated product was collected by filtration, washed with water and used in the next step without further purification (7.0 g, 97% yield). After cooling to ambient temperature The precipitated product was collected by filtration washed with water used in the next step without further purification (7.0 g, 97% yield)

Conditions: temp:150.01; pressure:0.00; stir:; See reaction.notes.procedure_details.

Procedure: A mixture of 2-bromo-4-(4-bromophenyl)-1,3-thiazole (2.9 g, 9.09 mmol), prepared in step 2 of Example 1, and (R)-(−)-2-amino-pentanol (2.82 g, 27.2 mmol) was stirred under nitrogen at 150° C. for 18 h. After cooling to room temperature, the residue was taken up in methylene chloride, applied to a Biotage FLASH 40+™ cartridge and the methylene chloride allowed to evaporate. Purification of the residue on the samplet on a Horizon™ Flash Collector (the Biotage FLASH 40+™ cartridge) using a linear gradient of 5% ethyl acetate-hexane to 100% ethyl acetate gave (2R)-2-{[4-(4-bromophenyl)-1,3-thiazol-2-yl]amino}pentan-1-ol (2.56 g, 83%) as a yellow solid, mp 63-65° C.; MS (ESI) m/z 341 [M+H]+. After cooling to room temperature to evaporate Purification of the residue on the samplet on a Horizon™ Flash Collector (the Biotage FLASH 40+™ cartridge)

Conditions: temp:150.01; pressure:0.00; stir:; See reaction.notes.procedure_details.

Procedure: A mixture of 2-bromo-4-(4-bromophenyl)-1,3-thiazole (2.9 g, 9.09 mmol), prepared in step 2 of Example 1, and (R)-(−)-2-amino-pentanol (2.82 g, 27.2 mmol) was stirred under nitrogen at 150° C. for 18 h. After cooling to room temperature, the residue was taken up in methylene chloride, applied to a Biotage FLASH 40+™ cartridge and the methylene chloride allowed to evaporate. Purification of the residue on the samplet on a Horizon™ Flash Collector (the Biotage FLASH 40+™ cartridge) using a linear gradient of 5% ethyl acetate-hexane to 100% ethyl acetate gave (2R)-2-{[4-(4-bromophenyl)-1,3-thiazol-2-yl]amino}pentan-1-ol (2.56 g, 83%) as a yellow solid, mp 63-65° C.; MS (ESI) m/z 341 [M+H]+. After cooling to room temperature to evaporate Purification of the residue on the samplet on a Horizon™ Flash Collector (the Biotage FLASH 40+™ cartridge)

Conditions: temp:110.01; pressure:0.00; stir:; See reaction.notes.procedure_details.

Procedure: 5-(Benzylthio)-7-chloro[1,3]thiazolo[4,5-d]pyrimidin-2-amine (6.0 g, 19.4 mmol) was dissolved in NMP (30 mL). DIPEA (8.4 mL, 48.5 mmol) and 2-amino-(2R)-1-pentanol (3.5 g, 33.9 mmol) were added and the mixture was heated to 110° C. for 4 days. After cooling to room temperature, the mixture was poured into water (200 mL). The precipitated product was collected by filtration, washed with water and used in the next step without further purification (7.0 g, 97% yield). After cooling to room temperature The precipitated product was collected by filtration washed with water used in the next step without further purification (7.0 g, 97% yield)

Conditions: temp:110.01; pressure:0.00; stir:; See reaction.notes.procedure_details.

Procedure: 5-(Benzylthio)-7-chloro[1,3]thiazolo[4,5-d]pyrimidin-2-amine (6.0 g, 19.4 mmol) was dissolved in NMP (30 mL). DIPEA (8.4 mL, 48.5 mmol) and 2-amino-(2R)-1-pentanol (3.5 g, 33.9 mmol) were added and the mixture was heated to 110° C. for 4 days. After cooling to room temperature, the mixture was poured into water (200 mL). The precipitated product was collected by filtration, washed with water and used in the next step without further purification (7.0 g, 97% yield). After cooling to room temperature The precipitated product was collected by filtration washed with water used in the next step without further purification (7.0 g, 97% yield)

Conditions: temp:120.01; pressure:0.00; stir:; See reaction.notes.procedure_details.

Procedure: 1.4 g 2,4-dichloro-6,7-dihydrothieno[3,2-d]pyrimidine (II) are placed in 9 ml dioxane, then first 3.5 ml diisopropylethylamine, then 0.9 g D-norvalinol are added. The reaction mixture is heated in the microwave at 120° C., until there is no further reaction, and cooled, then evaporated down. The residue is treated with petroleum ether/ethyl acetate 9:1 in the ultrasound bath, the solid is suction filtered and dried. 1.5 g (III-3) are obtained as a solid. no further reaction cooled evaporated down The residue is treated with petroleum ether/ethyl acetate 9:1 in the ultrasound bath filtered dried 1.5 g (III-3) are obtained as a solid

Conditions: temp:120.01; pressure:0.00; stir:; See reaction.notes.procedure_details.

Procedure: 1.4 g 2,4-dichloro-6,7-dihydrothieno[3,2-d]pyrimidine (II) are placed in 9 ml dioxane, then first 3.5 ml diisopropylethylamine, then 0.9 g D-norvalinol are added. The reaction mixture is heated in the microwave at 120° C., until there is no further reaction, and cooled, then evaporated down. The residue is treated with petroleum ether/ethyl acetate 9:1 in the ultrasound bath, the solid is suction filtered and dried. 1.5 g (III-3) are obtained as a solid. no further reaction cooled evaporated down The residue is treated with petroleum ether/ethyl acetate 9:1 in the ultrasound bath filtered dried 1.5 g (III-3) are obtained as a solid

Conditions: temp:110.01; pressure:0.00; stir:; See reaction.notes.procedure_details.

Procedure: 5-(Benzylthio)-7-chloro[1,3]thiazolo[4,5-d]pyrimidin-2-amine (6.0 g, 19.4 mmol) was dissolved in NMP (30 mL). DIPEA (8.4 mL, 48.5 mmol) and 2-amino-(2R)-1-pentanol (3.5 g, 33.9 mmol) were added and the mixture was heated to 110° C. for 4 days. After cooling to ambient temperature, the mixture was poured into water (200 mL). The precipitated product was collected by filtration, washed with water and used in the next step without further purification (7.0 g, 97% yield). After cooling to ambient temperature The precipitated product was collected by filtration washed with water used in the next step without further purification (7.0 g, 97% yield)

Conditions: temp:110.01; pressure:0.00; stir:; See reaction.notes.procedure_details.

Procedure: 5-(Benzylthio)-7-chloro[1,3]thiazolo[4,5-d]pyrimidin-2-amine (6.0 g, 19.4 mmol) was dissolved in NMP (30 mL). DIPEA (8.4 mL, 48.5 mmol) and 2-amino-(2R)-1-pentanol (3.5 g, 33.9 mmol) were added and the mixture was heated to 110° C. for 4 days. After cooling to ambient temperature, the mixture was poured into water (200 mL). The precipitated product was collected by filtration, washed with water and used in the next step without further purification (7.0 g, 97% yield). After cooling to ambient temperature The precipitated product was collected by filtration washed with water used in the next step without further purification (7.0 g, 97% yield)