1,3-dibromo-2-(bromomethyl)benzene

Conditions: temp:0.00; pressure:0.00; stir:

Conditions: temp:0.00; pressure:0.00; stir:

Conditions: temp:100.01; pressure:0.00; stir:; See reaction.notes.procedure_details.

Procedure: A mixture of 1,3-dibromo-2-(bromomethyl)benzene (27.6 g, 84 mmol), NaOAc (35.5 g, 5 eq.) and dimethylformamide (DMF) (150 mL) was stirred at 100° C. (hot oil bath temperature) for 1.75 h, allowed to cool, and then partitioned between heptane (500 mL) and water (200 mL). After removing the organic layer, the aqueous layer was extracted with heptane (200 mL). The combined organics were washed with H2O (2×300 mL), dried (Na2SO4), filtered, and evaporated to give 24.57 g (yield of 95%) of title product as a colorless oil. This oil contained 13% unreacted starting material but was successfully used without further purification. 1H NMR (300 MHz, CDCl3) δ 2.10 (s, 3H), 5.41 (s, 2H), 7.08 (t, 1H), 7.58 (d, 2H). to cool partitioned between heptane (500 mL) and water (200 mL) After removing the organic layer the aqueous layer was extracted with heptane (200 mL) The combined organics were washed with H2O (2×300 mL) dried (Na2SO4) filtered evaporated

Conditions: temp:85.01; pressure:0.00; stir:; See reaction.notes.procedure_details.

Procedure: A mixture of 2,6-dibromotoluene (22.9 g, 92 mmol), N-bromosuccinimide (NBS) (15 g, 84 mmol), CCl4 (250 mL) and benzoyl peroxide (0.03 eq) was stirred at 85° C. (hot oil bath temperature) for 16 h, cooled to RT, filtered, washed with aq. NaHSO3, dried (Na2SO4), filtered, and evaporated to give 29.5 g (yield of 98%) of title product as a white solid. This solid contained 10% unreacted starting material but was successfully used without further purification. 1H NMR (300 MHz, CDCl3) δ 4.81 (s, 2H), 7.01 (t, 1H), 7.53 (d, 2H). cooled to RT filtered washed with aq. NaHSO3 dried (Na2SO4) filtered evaporated

Conditions: temp:105.01; pressure:0.00; stir:; See reaction.notes.procedure_details.

Procedure: To the solution of 1,3-dibromo-2-bromomethylbenzene (71.3 g) in DMF (300 mL) was added sodium acetate (91.7 g) and the resulting mixture was stirred at 105° C. for 6 h. The mixture was cooled and quenched with water (1500 mL) and extracted with ethyl acetate (1000 mL×2). The combined organic layers were washed with water (1000 mL) and brine (1000 mL), dried over anhydrous sodium sulfate and filtered. The residue was purified by silica gel column (200-300 mesh, eluting with petroleum ether/ethyl acetate 30/1) to give acetic acid 2,6-dibromobenzyl ester as a yellow oil (59.42 g, yield 89%). 1H NMR (300 MHz, d6-DMSO) δ 7.57 (d, J=8.0 Hz, 2H), 7.07 (t, J=7.8 Hz, 1H), 5.41 (s, 2H), 2.11 (s, 3H). The mixture was cooled quenched with water (1500 mL) extracted with ethyl acetate (1000 mL×2) The combined organic layers were washed with water (1000 mL) and brine (1000 mL) dried over anhydrous sodium sulfate filtered The residue was purified by silica gel column (200-300 mesh, eluting with petroleum ether/ethyl acetate 30/1)

Conditions: temp:0.00; pressure:0.00; stir:; See reaction.notes.procedure_details.

Procedure: To the solution of 2,6-dibromotoluene (55.5 g, 222.1 mmol) and NBS (43.5 g, 244.3 mmol) in carbon tetrachloride (300 mL) was added benzoyl peroxide (5.37 g, 22.2 mmol). The reaction mixture was refluxed for 20 h, cooled to room temperature, washed with water (300 mL×3) and brine (300 mL) and dried over anhydrous sodium sulfate. The solution was filtered and evaporated to give 1,3-dibromo-2-bromomethylbenzene as a yellow power (71 g). This material was used for next step without further purification. The reaction mixture was refluxed for 20 h washed with water (300 mL×3) and brine (300 mL) dried over anhydrous sodium sulfate The solution was filtered evaporated

Conditions: temp:0.00; pressure:0.00; stir:; See reaction.notes.procedure_details.

Procedure: To the solution of 2,6-dibromotoluene (55.5 g, 222.1 mmol) and NBS (43.5 g, 244.3 mmol) in carbon tetrachloride (300 mL) was added benzoyl peroxide (5.37 g, 22.2 mmol). The reaction mixture was refluxed for 20 h, cooled to room temperature, washed with water (300 mL×3) and brine (300 mL) and dried over anhydrous sodium sulfate. The solution was filtered and evaporated to give 1,3-dibromo-2-bromomethylbenzene as a yellow power (71 g). This material was used for next step without further purification. The reaction mixture was refluxed for 20 h washed with water (300 mL×3) and brine (300 mL) dried over anhydrous sodium sulfate The solution was filtered evaporated

Conditions: temp:0.00; pressure:0.00; stir:; See reaction.notes.procedure_details.

Procedure: A 250-mL single-neck round-bottomed flask equipped with a magnetic stirrer, reflux condenser and nitrogen inlet was purged with nitrogen and charged with 2,6-dibromotoluene (2.50 g, 10.0 mmol), N-bromosuccinimide (1.78 g, 10.0 mmol) and carbon tetrachloride (40 mL). The solution was heated to 80° C. (oil bath temperature), and 2,2′-azobisisobutyronitrile (164 mg, 1.00 mmol) was added. The resulting mixture was refluxed for 14 h. After that time, the mixture was cooled to room temperature and filtered. The filter cake was washed with carbon tetrachloride (2×20 mL). The filtrate was diluted with ethyl acetate (200 mL) and washed with water (40 mL), saturated aqueous sodium bicarbonate (40 mL) and brine (40 mL). The organic layer was dried over sodium sulfate and concentrated under reduced pressure to afford a quantitative yield (3.28 g) of 1,3-dibromo-2-(bromomethyl)benzene as a yellow solid: mp 77-78° C.; 1H NMR (300 MHz, CDCl3) δ 7.55 (d, 2H, J=8.1 Hz), 7.07 (t, 1H, J=8.1 Hz), 4.83 (s, 2H). A 250-mL single-neck round-bottomed flask equipped with a magnetic stirrer and nitrogen inlet was purged with nitrogen and charged with this residue (3.28 g, 10.0 mmol), potassium acetate (3.93 g, 40.0 mmol) and DMF (100 mL). The solution was stirred at room temperature for 14 h. After that time, the reaction mixture was diluted with water (900 mL) and extracted with ethyl acetate (3×200 mL). The combined organic layers were washed with brine (100 mL), dried over sodium sulfate and concentrated under reduced pressure. The residue was purified by column chromatography to afford an 88% yield (2.70 g) of 102d as an off-white solid: mp 62-65° C.; 1H NMR (300 MHz, CDCl3) δ 7.57 (d, 2H, J=8.0 Hz), 7.07 (t, 1H, J=7.9 Hz), 5.42 (s, 2H), 2.11 (s, 3H); MS (ESI+) m/z 306.9 (M+H). A 250-mL single-neck round-bottomed flask equipped with a magnetic stirrer reflux condenser and nitrogen inlet was purged with nitrogen was added The resulting mixture was refluxed for 14 h filtered The filter cake was washed with carbon tetrachloride (2×20 mL) The filtrate was diluted with ethyl acetate (200 mL) washed with water (40 mL), saturated aqueous sodium bicarbonate (40 mL) and brine (40 mL) The organic layer was dried over sodium sulfate concentrated under reduced pressure

Conditions: temp:100.01; pressure:0.00; stir:; See reaction.notes.procedure_details.

Procedure: A mixture of 1,3-dibromo-2-(bromomethyl)benzene (27.6 g, 84 mmol), NaOAc (35.5 g, 5 eq.) and dimethylformamide (DMF) (150 mL) was stirred at 100° C. (hot oil bath temperature) for 1.75 h, allowed to cool, and then partitioned between heptane (500 mL) and water (200 mL). After removing the organic layer, the aqueous layer was extracted with heptane (200 mL). The combined organics were washed with H2O (2×300 mL), dried (Na2SO4), filtered, and evaporated to give 24.57 g (yield of 95%) of title product as a colorless oil. This oil contained 13% unreacted starting material but was successfully used without further purification. 1H NMR (300 MHz, CDCl3) δ 2.10 (s, 3H), 5.41 (s, 2H), 7.08 (t, 1H), 7.58 (d, 2H). to cool partitioned between heptane (500 mL) and water (200 mL) After removing the organic layer the aqueous layer was extracted with heptane (200 mL) The combined organics were washed with H2O (2×300 mL) dried (Na2SO4) filtered evaporated

Conditions: temp:85.01; pressure:0.00; stir:; See reaction.notes.procedure_details.

Procedure: A mixture of 2,6-dibromotoluene (22.9 g, 92 mmol), N-bromosuccinimide (NBS) (15 g, 84 mmol), CCl4 (250 mL) and benzoyl peroxide (0.03 eq) was stirred at 85° C. (hot oil bath temperature) for 16 h, cooled to RT, filtered, washed with aq. NaHSO3, dried (Na2SO4), filtered, and evaporated to give 29.5 g (yield of 98%) of title product as a white solid. This solid contained 10% unreacted starting material but was successfully used without further purification. 1H NMR (300 MHz, CDCl3) δ 4.81 (s, 2H), 7.01 (t, 1H), 7.53 (d, 2H). cooled to RT filtered washed with aq. NaHSO3 dried (Na2SO4) filtered evaporated

Conditions: temp:0.00; pressure:0.00; stir:

Conditions: temp:0.00; pressure:0.00; stir: