1-azabicyclo[2.2.2]octane-2-carbonitrile

Conditions: temp:0.00; pressure:0.00; stir:; See reaction.notes.procedure_details.

Procedure: In the same manner as in a document (Mi, Y.; Corey, E. J. Tetrahedron Lett. 2006, 47, 2515-2516), optical resolution by a diastereomer salt method was performed to synthesis the title compound. That is, to a solution of 1-azabicyclo[2.2.2]octane-2-carbonitrile (20.0 g) produced in Example 164, step E, in methanol (100 mL) was slowly added a solution of (+)-tartaric acid (22.0 g) in methanol (100 mL) at 0° C. The reaction system was stirred for 90 min, and concentrated, and the obtained solid was crystallized 4 times from methanol to give (+)-tartrate of (2S)-1-azabicyclo[2.2.2]octane-2-carbonitrile (3.0 g, >90% ee). To the obtained solid was added water (50 mL), and sodium hydrogen carbonate was added to reach pH 8. The mixture was extracted with dichloromethane (100 mL×3), and the extract was washed with brine, dried, and concentrated. The obtained white solid (1.4 g) was dissolved in concentrated hydrochloric acid (50 mL), and the reaction mixture was heated under reflux overnight. After concentration, to the residue was slowly added a solution of sodium hydroxide (0.83 g) in water (10 mL) at 0° C. The mixture was concentrated, concentrated hydrochloric acid (5 mL) was added, and the mixture was concentrated again. The obtained white solid was extracted with methanol (10 mL). Insoluble material was filtered off, and the filtrate was concentrated to give the title compound (1.7 g). concentrated the obtained solid was crystallized 4 times from methanol

Conditions: temp:0.00; pressure:0.00; stir:; See reaction.notes.procedure_details.

Procedure: In the same manner as in a document (Mi, Y.; Corey, E. J. Tetrahedron Lett. 2006, 47, 2515-2516), optical resolution by a diastereomer salt method was performed to synthesis the title compound. That is, to a solution of 1-azabicyclo[2.2.2]octane-2-carbonitrile (20.0 g) in methanol (100 mL) was slowly added a solution of (+)-tartaric acid (22.0 g) in methanol (100 mL) at 0° C. The reaction system was stirred for 90 min, and concentrated, and the obtained solid was crystallized 4 times from methanol. The precipitate was filtered off, and the filtrate was concentrated. To the residue was added water (150 mL), and sodium hydrogen carbonate was added to reach pH 8. The mixture was extracted with dichloromethane (200 mL×3), and the extract was washed with brine, dried, and concentrated. The obtained white solid (15.0 g) was dissolved in methanol (100 mL), and a solution of (−)-tartaric acid (16.5 g) in methanol (100 mL) was slowly added at 0° C. The reaction system was stirred for 90 min, and concentrated, and the obtained solid was crystallized 4 times from methanol to give (−)-tartrate of (2R)-1-azabicyclo[2.2.2]octane-2-carbonitrile (4.0 g, >90% ee). To the obtained solid was added water (50 mL), and sodium hydrogen carbonate was added to reach pH 8. The mixture was extracted with dichloromethane (100 mL×3), and the extract was washed with brine, dried, and concentrated. The obtained white solid (1.75 g) was dissolved in concentrated hydrochloric acid (50 mL), and the reaction mixture was heated under reflux overnight. After concentration, to the residue was slowly added a solution of sodium hydroxide (1.04 g) in water (10 mL) at 0° C. The mixture was concentrated, concentrated hydrochloric acid (5 mL) was added, and the mixture was concentrated again. The obtained white solid was extracted with methanol (10 mL). Insoluble material was filtered off, and the filtrate was concentrated to give the title compound (0.80 g). concentrated the obtained solid was crystallized 4 times from methanol The precipitate was filtered off the filtrate was concentrated To the residue was added water (150 mL), and sodium hydrogen carbonate was added The mixture was extracted with dichloromethane (200 mL×3) the extract was washed with brine dried concentrated The obtained white solid (15.0 g) was dissolved in methanol (100 mL) a solution of (−)-tartaric acid (16.5 g) in methanol (100 mL) was slowly added at 0° C The reaction system was stirred for 90 min concentrated the obtained solid was crystallized 4 times from methanol

Conditions: temp:0.00; pressure:0.00; stir:; See reaction.notes.procedure_details.

Procedure: To a solution of tert-butyl 4-{2-cyano-2-[(methylsulfonyl)oxy]ethyl}piperidine-1-carboxylate (80.0 g) in dichloromethane (200 mL) was added a solution of trifluoroacetic acid (137.0 g) in dichloromethane (200 mL), and the reaction system was stirred at room temperature overnight. The reaction system was concentrated, acetonitrile (200 mL) was added to the residue, and triethylamine (98.0 g) was slowly added at 0° C. The mixture was concentrated, the residue was diluted with dichloromethane, and the mixture was washed with brine, and dried over anhydrous sodium sulfate. Insoluble material was removed by filtration, and the filtrate was concentrated. The residue was purified by flash silica gel column chromatography (ethyl acetate/petroleum ether) to give the title compound (13.0 g) as a yellow oil. The reaction system was concentrated acetonitrile (200 mL) was added to the residue, and triethylamine (98.0 g) was slowly added at 0° C The mixture was concentrated the residue was diluted with dichloromethane the mixture was washed with brine dried over anhydrous sodium sulfate Insoluble material was removed by filtration the filtrate was concentrated The residue was purified by flash silica gel column chromatography (ethyl acetate/petroleum ether)

Conditions: temp:0.00; pressure:0.00; stir:; See reaction.notes.procedure_details.

Procedure: In the same manner as in a document (Mi, Y.; Corey, E. J. Tetrahedron Lett. 2006, 47, 2515-2516), optical resolution by a diastereomer salt method was performed to synthesis the title compound. That is, to a solution of 1-azabicyclo[2.2.2]octane-2-carbonitrile (20.0 g) produced in Example 164, step E, in methanol (100 mL) was slowly added a solution of (+)-tartaric acid (22.0 g) in methanol (100 mL) at 0° C. The reaction system was stirred for 90 min, and concentrated, and the obtained solid was crystallized 4 times from methanol to give (+)-tartrate of (2S)-1-azabicyclo[2.2.2]octane-2-carbonitrile (3.0 g, >90% ee). To the obtained solid was added water (50 mL), and sodium hydrogen carbonate was added to reach pH 8. The mixture was extracted with dichloromethane (100 mL×3), and the extract was washed with brine, dried, and concentrated. The obtained white solid (1.4 g) was dissolved in concentrated hydrochloric acid (50 mL), and the reaction mixture was heated under reflux overnight. After concentration, to the residue was slowly added a solution of sodium hydroxide (0.83 g) in water (10 mL) at 0° C. The mixture was concentrated, concentrated hydrochloric acid (5 mL) was added, and the mixture was concentrated again. The obtained white solid was extracted with methanol (10 mL). Insoluble material was filtered off, and the filtrate was concentrated to give the title compound (1.7 g). concentrated the obtained solid was crystallized 4 times from methanol

Conditions: temp:0.00; pressure:0.00; stir:; See reaction.notes.procedure_details.

Procedure: In the same manner as in a document (Mi, Y.; Corey, E. J. Tetrahedron Lett. 2006, 47, 2515-2516), optical resolution by a diastereomer salt method was performed to synthesis the title compound. That is, to a solution of 1-azabicyclo[2.2.2]octane-2-carbonitrile (20.0 g) in methanol (100 mL) was slowly added a solution of (+)-tartaric acid (22.0 g) in methanol (100 mL) at 0° C. The reaction system was stirred for 90 min, and concentrated, and the obtained solid was crystallized 4 times from methanol. The precipitate was filtered off, and the filtrate was concentrated. To the residue was added water (150 mL), and sodium hydrogen carbonate was added to reach pH 8. The mixture was extracted with dichloromethane (200 mL×3), and the extract was washed with brine, dried, and concentrated. The obtained white solid (15.0 g) was dissolved in methanol (100 mL), and a solution of (−)-tartaric acid (16.5 g) in methanol (100 mL) was slowly added at 0° C. The reaction system was stirred for 90 min, and concentrated, and the obtained solid was crystallized 4 times from methanol to give (−)-tartrate of (2R)-1-azabicyclo[2.2.2]octane-2-carbonitrile (4.0 g, >90% ee). To the obtained solid was added water (50 mL), and sodium hydrogen carbonate was added to reach pH 8. The mixture was extracted with dichloromethane (100 mL×3), and the extract was washed with brine, dried, and concentrated. The obtained white solid (1.75 g) was dissolved in concentrated hydrochloric acid (50 mL), and the reaction mixture was heated under reflux overnight. After concentration, to the residue was slowly added a solution of sodium hydroxide (1.04 g) in water (10 mL) at 0° C. The mixture was concentrated, concentrated hydrochloric acid (5 mL) was added, and the mixture was concentrated again. The obtained white solid was extracted with methanol (10 mL). Insoluble material was filtered off, and the filtrate was concentrated to give the title compound (0.80 g). concentrated the obtained solid was crystallized 4 times from methanol The precipitate was filtered off the filtrate was concentrated To the residue was added water (150 mL), and sodium hydrogen carbonate was added The mixture was extracted with dichloromethane (200 mL×3) the extract was washed with brine dried concentrated The obtained white solid (15.0 g) was dissolved in methanol (100 mL) a solution of (−)-tartaric acid (16.5 g) in methanol (100 mL) was slowly added at 0° C The reaction system was stirred for 90 min concentrated the obtained solid was crystallized 4 times from methanol

Conditions: temp:0.00; pressure:0.00; stir:; See reaction.notes.procedure_details.

Procedure: To a solution of tert-butyl 4-{2-cyano-2-[(methylsulfonyl)oxy]ethyl}piperidine-1-carboxylate (80.0 g) in dichloromethane (200 mL) was added a solution of trifluoroacetic acid (137.0 g) in dichloromethane (200 mL), and the reaction system was stirred at room temperature overnight. The reaction system was concentrated, acetonitrile (200 mL) was added to the residue, and triethylamine (98.0 g) was slowly added at 0° C. The mixture was concentrated, the residue was diluted with dichloromethane, and the mixture was washed with brine, and dried over anhydrous sodium sulfate. Insoluble material was removed by filtration, and the filtrate was concentrated. The residue was purified by flash silica gel column chromatography (ethyl acetate/petroleum ether) to give the title compound (13.0 g) as a yellow oil. The reaction system was concentrated acetonitrile (200 mL) was added to the residue, and triethylamine (98.0 g) was slowly added at 0° C The mixture was concentrated the residue was diluted with dichloromethane the mixture was washed with brine dried over anhydrous sodium sulfate Insoluble material was removed by filtration the filtrate was concentrated The residue was purified by flash silica gel column chromatography (ethyl acetate/petroleum ether)

Conditions: temp:0.00; pressure:0.00; stir:; See reaction.notes.procedure_details.

Procedure: To a solution of tert-butyl 4-{2-cyano-2-[(methylsulfonyl)oxy]ethyl}piperidine-1-carboxylate (80.0 g) in dichloromethane (200 mL) was added a solution of trifluoroacetic acid (137.0 g) in dichloromethane (200 mL), and the reaction system was stirred at room temperature overnight. The reaction system was concentrated, acetonitrile (200 mL) was added to the residue, and triethylamine (98.0 g) was slowly added at 0° C. The mixture was concentrated, the residue was diluted with dichloromethane, and the mixture was washed with brine, and dried over anhydrous sodium sulfate. Insoluble material was removed by filtration, and the filtrate was concentrated. The residue was purified by flash silica gel column chromatography (ethyl acetate/petroleum ether) to give the title compound (13.0 g) as a yellow oil. The reaction system was concentrated acetonitrile (200 mL) was added to the residue, and triethylamine (98.0 g) was slowly added at 0° C The mixture was concentrated the residue was diluted with dichloromethane the mixture was washed with brine dried over anhydrous sodium sulfate Insoluble material was removed by filtration the filtrate was concentrated The residue was purified by flash silica gel column chromatography (ethyl acetate/petroleum ether)

Conditions: temp:0.00; pressure:0.00; stir:; See reaction.notes.procedure_details.

Procedure: In the same manner as in a document (Mi, Y.; Corey, E. J. Tetrahedron Lett. 2006, 47, 2515-2516), optical resolution by a diastereomer salt method was performed to synthesis the title compound. That is, to a solution of 1-azabicyclo[2.2.2]octane-2-carbonitrile (20.0 g) produced in Example 164, step E, in methanol (100 mL) was slowly added a solution of (+)-tartaric acid (22.0 g) in methanol (100 mL) at 0° C. The reaction system was stirred for 90 min, and concentrated, and the obtained solid was crystallized 4 times from methanol to give (+)-tartrate of (2S)-1-azabicyclo[2.2.2]octane-2-carbonitrile (3.0 g, >90% ee). To the obtained solid was added water (50 mL), and sodium hydrogen carbonate was added to reach pH 8. The mixture was extracted with dichloromethane (100 mL×3), and the extract was washed with brine, dried, and concentrated. The obtained white solid (1.4 g) was dissolved in concentrated hydrochloric acid (50 mL), and the reaction mixture was heated under reflux overnight. After concentration, to the residue was slowly added a solution of sodium hydroxide (0.83 g) in water (10 mL) at 0° C. The mixture was concentrated, concentrated hydrochloric acid (5 mL) was added, and the mixture was concentrated again. The obtained white solid was extracted with methanol (10 mL). Insoluble material was filtered off, and the filtrate was concentrated to give the title compound (1.7 g). concentrated the obtained solid was crystallized 4 times from methanol

Conditions: temp:0.00; pressure:0.00; stir:; See reaction.notes.procedure_details.

Procedure: In the same manner as in a document (Mi, Y.; Corey, E. J. Tetrahedron Lett. 2006, 47, 2515-2516), optical resolution by a diastereomer salt method was performed to synthesis the title compound. That is, to a solution of 1-azabicyclo[2.2.2]octane-2-carbonitrile (20.0 g) in methanol (100 mL) was slowly added a solution of (+)-tartaric acid (22.0 g) in methanol (100 mL) at 0° C. The reaction system was stirred for 90 min, and concentrated, and the obtained solid was crystallized 4 times from methanol. The precipitate was filtered off, and the filtrate was concentrated. To the residue was added water (150 mL), and sodium hydrogen carbonate was added to reach pH 8. The mixture was extracted with dichloromethane (200 mL×3), and the extract was washed with brine, dried, and concentrated. The obtained white solid (15.0 g) was dissolved in methanol (100 mL), and a solution of (−)-tartaric acid (16.5 g) in methanol (100 mL) was slowly added at 0° C. The reaction system was stirred for 90 min, and concentrated, and the obtained solid was crystallized 4 times from methanol to give (−)-tartrate of (2R)-1-azabicyclo[2.2.2]octane-2-carbonitrile (4.0 g, >90% ee). To the obtained solid was added water (50 mL), and sodium hydrogen carbonate was added to reach pH 8. The mixture was extracted with dichloromethane (100 mL×3), and the extract was washed with brine, dried, and concentrated. The obtained white solid (1.75 g) was dissolved in concentrated hydrochloric acid (50 mL), and the reaction mixture was heated under reflux overnight. After concentration, to the residue was slowly added a solution of sodium hydroxide (1.04 g) in water (10 mL) at 0° C. The mixture was concentrated, concentrated hydrochloric acid (5 mL) was added, and the mixture was concentrated again. The obtained white solid was extracted with methanol (10 mL). Insoluble material was filtered off, and the filtrate was concentrated to give the title compound (0.80 g). concentrated the obtained solid was crystallized 4 times from methanol The precipitate was filtered off the filtrate was concentrated To the residue was added water (150 mL), and sodium hydrogen carbonate was added The mixture was extracted with dichloromethane (200 mL×3) the extract was washed with brine dried concentrated The obtained white solid (15.0 g) was dissolved in methanol (100 mL) a solution of (−)-tartaric acid (16.5 g) in methanol (100 mL) was slowly added at 0° C The reaction system was stirred for 90 min concentrated the obtained solid was crystallized 4 times from methanol

Conditions: temp:0.00; pressure:0.00; stir:; See reaction.notes.procedure_details.

Procedure: To a solution of tert-butyl 4-{2-cyano-2-[(methylsulfonyl)oxy]ethyl}piperidine-1-carboxylate (80.0 g) in dichloromethane (200 mL) was added a solution of trifluoroacetic acid (137.0 g) in dichloromethane (200 mL), and the reaction system was stirred at room temperature overnight. The reaction system was concentrated, acetonitrile (200 mL) was added to the residue, and triethylamine (98.0 g) was slowly added at 0° C. The mixture was concentrated, the residue was diluted with dichloromethane, and the mixture was washed with brine, and dried over anhydrous sodium sulfate. Insoluble material was removed by filtration, and the filtrate was concentrated. The residue was purified by flash silica gel column chromatography (ethyl acetate/petroleum ether) to give the title compound (13.0 g) as a yellow oil. The reaction system was concentrated acetonitrile (200 mL) was added to the residue, and triethylamine (98.0 g) was slowly added at 0° C The mixture was concentrated the residue was diluted with dichloromethane the mixture was washed with brine dried over anhydrous sodium sulfate Insoluble material was removed by filtration the filtrate was concentrated The residue was purified by flash silica gel column chromatography (ethyl acetate/petroleum ether)

Conditions: temp:0.00; pressure:0.00; stir:; See reaction.notes.procedure_details.

Procedure: In the same manner as in a document (Mi, Y.; Corey, E. J. Tetrahedron Lett. 2006, 47, 2515-2516), optical resolution by a diastereomer salt method was performed to synthesis the title compound. That is, to a solution of 1-azabicyclo[2.2.2]octane-2-carbonitrile (20.0 g) produced in Example 164, step E, in methanol (100 mL) was slowly added a solution of (+)-tartaric acid (22.0 g) in methanol (100 mL) at 0° C. The reaction system was stirred for 90 min, and concentrated, and the obtained solid was crystallized 4 times from methanol to give (+)-tartrate of (2S)-1-azabicyclo[2.2.2]octane-2-carbonitrile (3.0 g, >90% ee). To the obtained solid was added water (50 mL), and sodium hydrogen carbonate was added to reach pH 8. The mixture was extracted with dichloromethane (100 mL×3), and the extract was washed with brine, dried, and concentrated. The obtained white solid (1.4 g) was dissolved in concentrated hydrochloric acid (50 mL), and the reaction mixture was heated under reflux overnight. After concentration, to the residue was slowly added a solution of sodium hydroxide (0.83 g) in water (10 mL) at 0° C. The mixture was concentrated, concentrated hydrochloric acid (5 mL) was added, and the mixture was concentrated again. The obtained white solid was extracted with methanol (10 mL). Insoluble material was filtered off, and the filtrate was concentrated to give the title compound (1.7 g). concentrated the obtained solid was crystallized 4 times from methanol

Conditions: temp:0.00; pressure:0.00; stir:; See reaction.notes.procedure_details.

Procedure: In the same manner as in a document (Mi, Y.; Corey, E. J. Tetrahedron Lett. 2006, 47, 2515-2516), optical resolution by a diastereomer salt method was performed to synthesis the title compound. That is, to a solution of 1-azabicyclo[2.2.2]octane-2-carbonitrile (20.0 g) in methanol (100 mL) was slowly added a solution of (+)-tartaric acid (22.0 g) in methanol (100 mL) at 0° C. The reaction system was stirred for 90 min, and concentrated, and the obtained solid was crystallized 4 times from methanol. The precipitate was filtered off, and the filtrate was concentrated. To the residue was added water (150 mL), and sodium hydrogen carbonate was added to reach pH 8. The mixture was extracted with dichloromethane (200 mL×3), and the extract was washed with brine, dried, and concentrated. The obtained white solid (15.0 g) was dissolved in methanol (100 mL), and a solution of (−)-tartaric acid (16.5 g) in methanol (100 mL) was slowly added at 0° C. The reaction system was stirred for 90 min, and concentrated, and the obtained solid was crystallized 4 times from methanol to give (−)-tartrate of (2R)-1-azabicyclo[2.2.2]octane-2-carbonitrile (4.0 g, >90% ee). To the obtained solid was added water (50 mL), and sodium hydrogen carbonate was added to reach pH 8. The mixture was extracted with dichloromethane (100 mL×3), and the extract was washed with brine, dried, and concentrated. The obtained white solid (1.75 g) was dissolved in concentrated hydrochloric acid (50 mL), and the reaction mixture was heated under reflux overnight. After concentration, to the residue was slowly added a solution of sodium hydroxide (1.04 g) in water (10 mL) at 0° C. The mixture was concentrated, concentrated hydrochloric acid (5 mL) was added, and the mixture was concentrated again. The obtained white solid was extracted with methanol (10 mL). Insoluble material was filtered off, and the filtrate was concentrated to give the title compound (0.80 g). concentrated the obtained solid was crystallized 4 times from methanol The precipitate was filtered off the filtrate was concentrated To the residue was added water (150 mL), and sodium hydrogen carbonate was added The mixture was extracted with dichloromethane (200 mL×3) the extract was washed with brine dried concentrated The obtained white solid (15.0 g) was dissolved in methanol (100 mL) a solution of (−)-tartaric acid (16.5 g) in methanol (100 mL) was slowly added at 0° C The reaction system was stirred for 90 min concentrated the obtained solid was crystallized 4 times from methanol