methyl 4-methyl-3-oxopentanoate

Conditions: temp:0.00; pressure:0.00; stir:

Conditions: temp:0.00; pressure:0.00; stir:

Conditions: temp:0.00; pressure:0.00; stir:

Conditions: temp:0.00; pressure:0.00; stir:

Conditions: temp:0.00; pressure:0.00; stir:

Conditions: temp:0.00; pressure:0.00; stir:

Conditions: temp:0.00; pressure:0.00; stir:

Conditions: temp:0.00; pressure:0.00; stir:; See reaction.notes.procedure_details.

Procedure: To a solution of methyl 4-methyl-3-oxopentanoate (72 g, 0.5 mol), and ethylene glycol (56 g, 1 mol) in toluene (500 mL) was added 4-methylbenzenesulfonic acid (1.9 g, 0.01 mol). The mixture was stirred at reflux with a Dean-Stark trap to remove water. The reaction mixture was washed with a small amount of water and brine, dried over anhydrous Na2SO4, and concentrated in vacuum to give the crude methyl 2-(2-isopropyl-1,3-dioxolan-2-yl)-acetate (67 g 71% yield), which was used for the next step without further purification. at reflux with a Dean-Stark trap to remove water The reaction mixture was washed with a small amount of water and brine dried over anhydrous Na2SO4 concentrated in vacuum

Conditions: temp:80.01; pressure:0.00; stir:; See reaction.notes.procedure_details.

Procedure: A three-necked, 12-L round-bottom flask equipped with a mechanical stirrer, a thermometer and set up for distillation is charged with 2.6 L of toluene, 1.73 kg (12 mol) of methyl 4-methyl-3-oxopentanoate and 72 g (1.18 mol) of ethylene diamine. The mixture is heated to 80° C. and charged with 0.49 kg of aniline. The mixture is brought to reflux and distillation started. After 40 minutes a further 0.245 kg of aniline is charged and at 40 minute intervals a further two portions of aniline (0.245 and 0.25 kg) are charged. Distillation is continued for a further one to five hours until a total of 985 mL of solvent is removed. The solution is stirred at room temperature for 16 hours and a further 550 mL of solvent is removed by vacuum distillation (using approximately 85 mm Hg). The mixture is cooled and 2 L of water is charged to provide an oil. The mixture is warmed to 40 C. and a further 1.0 L of water is charged. Seven hundred milliliters of toluene-water mixture is removed by vacuum distillation (approximately 20 mm Hg). Two liters of water is charged and the mixture is allowed to stand for 10 days. The product is isolated by filtration and washed with three portions of hexane. Drying in vacuo gives 1.7 kg of 4-methyl-3-oxo-N-phenylpentanamide as a hydrate mp 46.5°-58.8° C. a thermometer and set up for distillation to reflux distillation After 40 minutes a further 0.245 kg of aniline is charged and at 40 minute intervals a further two portions of aniline (0.245 and 0.25 kg) are charged Distillation is continued for a further one to five hours until a total of 985 mL of solvent is removed a further 550 mL of solvent is removed by vacuum distillation (using approximately 85 mm Hg) The mixture is cooled 2 L of water is charged to provide an oil The mixture is warmed to 40 C Seven hundred milliliters of toluene-water mixture is removed by vacuum distillation (approximately 20 mm Hg) Two liters of water is charged to stand for 10 days The product is isolated by filtration washed with three portions of hexane Drying in vacuo

Conditions: temp:0.00; pressure:0.00; stir:; See reaction.notes.procedure_details.

Procedure: 4-Methyl-3-oxo-N-phenylpentanamide (XIX) is obtained by heating a mixture of methyl 4-methyl-3oxopentanoate (XX), airline and ethylene diamine in toluene. 4-Methyl-3-oxo-N-phenylpentanamide (XIX) is subsequently reacted with benzaldehyde in the presence of a catalyst such as, for example, piperidine and glacial acetic acid, ethylene diamine and glacial acetic acid, β-alanine and glacial acetic acid, and the like in an inert solvent such as, for example, toluene, heptane, hexane, and the like for about 24 to about 36 hours at about 60° to about 120° C. with the removal of water to afford 4-methyl-3-oxo-N-phenyl-2-(phenylmethylene)pentanamide (XVIII). Preferably the reaction is carried out with β-alanine and glacial acetic acid at reflux for about 24 hours in hexane. The 4-methyl-3-oxo-N-phenyl-2-(phenylmethylene)pentanamide (XVIII) is reacted with 4-fluorobenzaldehyde in the presence of a catalyst such as, for example, 3-benzyl-5-(2-hydroxyethyl)-4-methylthiazolium chloride, 3,4-dimethyl-5-(2-hydroxyethyl)thiazolium iodide, 3-ethyl-5-(2-hydroxyethyl)-4-methylthiazolium bromide, thiamine hydrochloride, and the like, and a base such as, for example, N,N-diisopropylethyamine, pyridine, N,N-dimethylaniline, triethylamine, 1,8-diazabicyclo[5.4.0]undec-7-ene (DBU), 1,4-diazabicyclo2.2.2]octane (DABCO), 4-dimethylaminopyridine (DMAP), N,N,N',N'-tetramethylethylenediamine (TMEDA) and the like, either neat or in the presence of a solvent such as, for example, tetrahydrofuran, tertiary-butyl methyl ether, ethanol, dimethylformamide, dimethylsulfoxide, N-methylpyrrolidone, acetonitrile, methylisobutyl ketone, ethyl acetate, isopropanol, pyridine and the like for about 20 to about 30 hours under anhydrous conditions at about room temperature to about the reflux temperature of the solvent to afford the compound of Formula XVII. Preferably the reaction is carried out in the presence of 3-ethyl-5-(2-hydroxyethyl)-4-methylthiazolium bromide and triethylamine in ethanol at about 75°-80° C. for about 24 hours. The compound of Formula XVII is reacted with a compound of Formula ##STR45## wherein R10 and R11 are alkyl of one to eight carbon atoms or R10 and R11 together are ##STR46## --CH2CH2 -- or --CH2CH2CH2 -- in the presence of a catalyst of Formula by heating like for about 24 to about 36 hours at about 60° to about 120° C.

Conditions: temp:0.00; pressure:0.00; stir:; See reaction.notes.procedure_details.

Procedure: Prepared from methyl isobutyrylacetate, 4-fluorobenzaldehyde and ammonium acetate by the procedures described in Example 1, Steps A-D.

Conditions: temp:0.00; pressure:0.00; stir: