(3-iodo-2-methylphenyl)methanol

Conditions: temp:0.00; pressure:0.00; stir:

Conditions: temp:0.00; pressure:0.00; stir:

Conditions: temp:0.00; pressure:0.00; stir:

Conditions: temp:0.00; pressure:0.00; stir:; See reaction.notes.procedure_details.

Procedure: In a photoreactor was placed 3-iodo-2-methylbenzyl alcohol (5.0 g, 0.02 mole) and 800 ml of benzene. To this was added sodium thiosulfate (5.0 g, 0.04 mole) in 15 ml of water. The mixture was purged with argon for 30 minutes, then irradiated with a 200 watt medium pressure ultraviolet lamp for 36.5 hours. The reaction mixture was then transferred to a separatory funnel. The photoreactor was washed with approximately 20 ml each of water, chloroform, and acetone. These washes were added to the separatory funnel. The organic layer was washed with aqueous 0.5 M sodium thiosulfate, then with an aqueous solution saturated with sodium chloride. The organic layer was then dried and filtered. The filtrate was evaporated under reduced pressure to an oily residue. The residue was purified by column chromatography on silica gel, elution with 1:1 hexane:chloroform, to give 2-methyl[1,1'-biphenyl]-3-methanol (2.4 g). The nmr and ir spectra were consistent with that expected for the named compound. The mixture was purged with argon for 30 minutes irradiated with a 200 watt medium pressure ultraviolet lamp for 36.5 hours The reaction mixture was then transferred to a separatory funnel The photoreactor was washed with approximately 20 ml each of water, chloroform, and acetone These washes were added to the separatory funnel The organic layer was washed with aqueous 0.5 M sodium thiosulfate The organic layer was then dried filtered The filtrate was evaporated under reduced pressure to an oily residue The residue was purified by column chromatography on silica gel, elution with 1:1 hexane

Conditions: temp:0.00; pressure:0.00; stir:; See reaction.notes.procedure_details.

Procedure: A stirred solution of 3-hydroxymethyl-2-methylaniline hydrochloride (43.4 g, 0.25 mole) and 17.2 ml of concentrated sulfuric acid in ice-water was cooled to 0°, and a solution of sodium nitrite (17.3 g, 0.25 mole) in water was added dropwise. Upon complete addition, the reaction mixture was stirred for an additional 0.5 hour, then an additional 8 ml of concentrated sulfuric acid was added dropwise. With the temperature maintained at 0°, a solution of potassium iodide (49.8 g, 0.30 mole) in water was added dropwise to the reaction mixture, followed by the addition of 0.1 gram of copper powder. The reaction mixture was slowly warmed to 70° where it stirred for 1 hour. The reaction mixture was then allowed to stand for 18 hours while cooling to room temperature. The reaction mixture was then taken up in water and extracted with chloroform. The chloroform extract was washed with an aqueous saturated solution of sodium bisulfite, then with water. The chloroform layer was dried and filtered. The filtrate was evaporated under reduced pressure to give 3-iodo-2-methylbenzyl alcohol (15.2 g) as a dark solid. Upon complete addition With the temperature maintained at 0° The reaction mixture was slowly warmed to 70° where it stirred for 1 hour to stand for 18 hours extracted with chloroform The chloroform extract was washed with an aqueous saturated solution of sodium bisulfite The chloroform layer was dried filtered The filtrate was evaporated under reduced pressure

Conditions: temp:0.00; pressure:0.00; stir:; See reaction.notes.procedure_details.

Procedure: A stirred solution of 3-hydroxymethyl-2-methylaniline hydrochloride (43.4 g, 0.25 mole) and 17.2 ml of concentrated sulfuric acid in ice-water was cooled to 0°, and a solution of sodium nitrite (17.3 g, 0.25 mole) in water was added dropwise. Upon complete addition, the reaction mixture was stirred for an additional 0.5 hour, then an additional 8 ml of concentrated sulfuric acid was added dropwise. With the temperature maintained at 0°, a solution of potassium iodide (49.8 g, 0.30 mole) in water was added dropwise to the reaction mixture, followed by the addition of 0.1 gram of copper powder. The reaction mixture was slowly warmed to 70° where it stirred for 1 hour. The reaction mixture was then allowed to stand for 18 hours while cooling to room temperature. The reaction mixture was then taken up in water and extracted with chloroform. The chloroform extract was washed with an aqueous saturated solution of sodium bisulfite, then with water. The chloroform layer was dried and filtered. The filtrate was evaporated under reduced pressure to give 3-iodo-2-methylbenzyl alcohol (15.2 g) as a dark solid. Upon complete addition With the temperature maintained at 0° The reaction mixture was slowly warmed to 70° where it stirred for 1 hour to stand for 18 hours extracted with chloroform The chloroform extract was washed with an aqueous saturated solution of sodium bisulfite The chloroform layer was dried filtered The filtrate was evaporated under reduced pressure

Conditions: temp:0.00; pressure:0.00; stir:; See reaction.notes.procedure_details.

Procedure: In a photoreactor was placed 3-iodo-2-methylbenzyl alcohol (5.0 g, 0.02 mole) and 800 ml of benzene. To this was added sodium thiosulfate (5.0 g, 0.04 mole) in 15 ml of water. The mixture was purged with argon for 30 minutes, then irradiated with a 200 watt medium pressure ultraviolet lamp for 36.5 hours. The reaction mixture was then transferred to a separatory funnel. The photoreactor was washed with approximately 20 ml each of water, chloroform, and acetone. These washes were added to the separatory funnel. The organic layer was washed with aqueous 0.5M sodium thiosulfate, then with an aqueous solution saturated with sodium chloride. The organic layer was then dried and filtered. The filtrate was evaporated under reduced pressure to an oily residue. The residue was purified by column chromatography on silica gel, elution with 1:1 hexane:chloroform, to give 2-methyl[1,1'-biphenyl]-3-methanol (2.4 g). The nmr and ir spectra were consistent with that expected for the named compound. The mixture was purged with argon for 30 minutes irradiated with a 200 watt medium pressure ultraviolet lamp for 36.5 hours The reaction mixture was then transferred to a separatory funnel The photoreactor was washed with approximately 20 ml each of water, chloroform, and acetone These washes were added to the separatory funnel The organic layer was washed with aqueous 0.5M sodium thiosulfate The organic layer was then dried filtered The filtrate was evaporated under reduced pressure to an oily residue The residue was purified by column chromatography on silica gel, elution with 1:1 hexane

Conditions: temp:0.00; pressure:0.00; stir:; See reaction.notes.procedure_details.

Procedure: A stirred solution of 3-hydroxymethyl-2-methylaniline hydrochloride (43.4 g, 0.25 mole) and 17.2 ml of concentrated sulfuric acid in ice-water was cooled to 0°, and a solution of sodium nitrite (17.3 g, 0.25 mole) in water was added dropwise. Upon complete addition, the reaction mixture was stirred for an additional 0.5 hour, then an additional 8 ml of concentrated sulfuric acid was added dropwise. With the temperature maintained at 0°, a solution of potassium iodide (49.8 g, 0.30 mole) in water was added dropwise to the reaction mixture, followed by the addition of 0.1 gram of copper powder. The reaction mixture was slowly warmed to 70° where it stirred for 1 hour. The reaction mixture was then allowed to stand for 18 hours while cooling to room temperature. The reaction mixture was then taken up in water and extracted with chloroform. The chloroform extract was washed with an aqueous saturated solution of sodium bisulfite, then with water. The chloroform layer was dried and filtered. The filtrate was evaporated under reduced pressure to give 3-iodo-2-methylbenzyl alcohol (15.2 g) as a dark solid. Upon complete addition With the temperature maintained at 0° The reaction mixture was slowly warmed to 70° where it stirred for 1 hour to stand for 18 hours extracted with chloroform The chloroform extract was washed with an aqueous saturated solution of sodium bisulfite The chloroform layer was dried filtered The filtrate was evaporated under reduced pressure

Conditions: temp:0.00; pressure:0.00; stir:

Conditions: temp:0.00; pressure:0.00; stir:

Conditions: temp:0.00; pressure:0.00; stir:; See reaction.notes.procedure_details.

Procedure: In a photoreactor was placed 3-iodo-2-methylbenzyl alcohol (5.0 g, 0.02 mole) and 800 ml of benzene. To this was added sodium thiosulfate (5.0 g, 0.04 mole) in 15 ml of water. The mixture was purged with argon for 30 minutes, then irradiated with a 200 watt medium pressure ultraviolet lamp for 36.5 hours. The reaction mixture was then transferred to a separatory funnel. The photoreactor was washed with approximately 20 ml each of water, chloroform, and acetone. These washes were added to the separatory funnel. The organic layer was washed with aqueous 0.5 M sodium thiosulfate, then with an aqueous solution saturated with sodium chloride. The organic layer was then dried and filtered. The filtrate was evaporated under reduced pressure to an oily residue. The residue was purified by column chromatography on silica gel, elution with 1:1 hexane:chloroform, to give 2-methyl[1,1'-biphenyl]-3-methanol (2.4 g). The nmr and ir spectra were consistent with that expected for the named compound. The mixture was purged with argon for 30 minutes irradiated with a 200 watt medium pressure ultraviolet lamp for 36.5 hours The reaction mixture was then transferred to a separatory funnel The photoreactor was washed with approximately 20 ml each of water, chloroform, and acetone These washes were added to the separatory funnel The organic layer was washed with aqueous 0.5 M sodium thiosulfate The organic layer was then dried filtered The filtrate was evaporated under reduced pressure to an oily residue The residue was purified by column chromatography on silica gel, elution with 1:1 hexane

Conditions: temp:0.00; pressure:0.00; stir:; See reaction.notes.procedure_details.

Procedure: A stirred solution of 3-hydroxymethyl-2-methylaniline hydrochloride (43.4 g, 0.25 mole) and 17.2 ml of concentrated sulfuric acid in ice-water was cooled to 0°, and a solution of sodium nitrite (17.3 g, 0.25 mole) in water was added dropwise. Upon complete addition, the reaction mixture was stirred for an additional 0.5 hour, then an additional 8 ml of concentrated sulfuric acid was added dropwise. With the temperature maintained at 0°, a solution of potassium iodide (49.8 g, 0.30 mole) in water was added dropwise to the reaction mixture, followed by the addition of 0.1 gram of copper powder. The reaction mixture was slowly warmed to 70° where it stirred for 1 hour. The reaction mixture was then allowed to stand for 18 hours while cooling to room temperature. The reaction mixture was then taken up in water and extracted with chloroform. The chloroform extract was washed with an aqueous saturated solution of sodium bisulfite, then with water. The chloroform layer was dried and filtered. The filtrate was evaporated under reduced pressure to give 3iodo-2-methylbenzyl alcohol (15.2 g) as a dark solid. Upon complete addition With the temperature maintained at 0° The reaction mixture was slowly warmed to 70° where it stirred for 1 hour to stand for 18 hours extracted with chloroform The chloroform extract was washed with an aqueous saturated solution of sodium bisulfite The chloroform layer was dried filtered The filtrate was evaporated under reduced pressure