64987-85-5

Conditions: temp:0.00; pressure:0.00; stir:; See reaction.notes.procedure_details.

Procedure: The drug-linker SMCC-MDC was prepared in the following reactions: (1) 3-mercaptopropanoic acid (MPr) was reacted with N-succinimidyl 4-(maleimidomethyl)cyclohexane-1-carboxylate (SMCC) in the presence of DIEA, giving the MPr-SMCC at a yield of over 95%; Secondly, condensation of N-Me-L-Ala-MDC, which was prepared by deprotection of Fmoc-N-Me-Ala-MDC under a base piperidine in CH3CN, with MPr-SMCC under a coupling reagent EDC, giving the desired coupled product SMCC-MDC in 60-70% yield over two steps. Antibody Bat0206 (Abu) was diluted to 2.5 mg/mL in solution A (50 mM potassium phosphate, 50 mM NaCl, and 2 mM EDTA, pH 6.5). SMCC-MDC was added to give a ratio of SMCC-MDC to antibody of 7:1 mole equivalent. Then DMA was added to 15% (v/v) to the reaction and reaction was mixed by stirring for 4 h at ambient temperature. D-Lmcc-Bat0206 conjugate was purified from excess unreacted or hydrolyzed reagent and excess SMCC-MDC using a G25 gel filtration column equilibrated in pH 7.4 phosphate buffer (aqueous). The conjugate was then dialyzed overnight into pH 7.4 phosphate buffer (aqueous) and then filtered through a 0.22 μm filter for final storage. The number of SMCC-MDC molecule per Abu molecule in the final conjugate was measured by determining absorbance of the conjugate at 252 and 280 nm and using known extinction coefficients for SMCC-MDC and antibody at these two wavelengths. A ratio of maytansinoid compound to antibody of 3.5:1.0 was normally obtained.

Conditions: temp:0.00; pressure:0.00; stir:; See reaction.notes.procedure_details.

Procedure: Amphetamine-ATP (0.095 g, 3×10-4 mol, Example 12) was dissolved in 50 ml of 0.12M potassium carbonate in 80% methanol/20% water. After 5 min at room temperature the thiol concentration was determined by reaction with DTNB to be 25 mM. The amphetamine thiol (7.6 ml, 1.9×10-4 mol) was added with stirring to 20.3 ml (0.4 g, 5.9×10-6 mol) of SMCC-BSA, 10/1. The pH of the solution was adjusted to 7 with 1N hydrochloric acid. The container was purged with argon and the solution was stirred at room temperature for 2 hr. The conjugate solution was then dialyzed with a PYROSTART ultrafiltration module against 10 mM morpholineethanesulfonic acid, pH 5.77 and 110 ml of 3.57 mg/ml BSA-amphetamine was collected. The protein solution was frozen at -70° C. After 5 min at room temperature the thiol concentration was determined by reaction with DTNB The container was purged with argon The conjugate solution was then dialyzed with a PYROSTART ultrafiltration module against 10 mM morpholineethanesulfonic acid, pH 5.77 and 110 ml of 3.57 mg/ml BSA-amphetamine was collected The protein solution was frozen at -70° C.

Conditions: temp:0.00; pressure:0.00; stir:; See reaction.notes.procedure_details.

Procedure: Amphetamine-ATP (0.095 g, 3×10-4 mol, Example 12) was dissolved in 50 ml of 0.12M potassium carbonate in 80% methanol/20% water. After 5 min at room temperature the thiol concentration was determined by reaction with DTNB to be 25 mM. The amphetamine thiol (7.6 ml, 1.9×10-4 mol) was added with stirring to 20.3 ml (0.4 g, 5.9×10-6 mol) of SMCC-BSA, 10/1. The pH of the solution was adjusted to 7 with 1N hydrochloric acid. The container was purged with argon and the solution was stirred at room temperature for 2 hr. The conjugate solution was then dialyzed with a PYROSTART ultrafiltration module against 10 mM morpholineethanesulfonic acid, pH 5.77 and 110 ml of 3.57 mg/ml BSA-amphetamine was collected. The protein solution was frozen at -70° C. After 5 min at room temperature the thiol concentration was determined by reaction with DTNB The container was purged with argon The conjugate solution was then dialyzed with a PYROSTART ultrafiltration module against 10 mM morpholineethanesulfonic acid, pH 5.77 and 110 ml of 3.57 mg/ml BSA-amphetamine was collected The protein solution was frozen at -70° C.

Conditions: temp:0.00; pressure:0.00; stir:; See reaction.notes.procedure_details.

Procedure: The drug-linker SMCC-MDC was prepared in the following reactions: (1) 3-mercaptopropanoic acid (MPr) was reacted with N-succinimidyl 4-(maleimidomethyl)cyclohexane-1-carboxylate (SMCC) in the presence of N,N-diisopropylethylamine (DIEA), giving the MPr-SMCC at a yield of over 95%; (2) condensation of N-Me-L-Ala-MDC, which was prepared by deprotection of Fmoc-N-Me-Ala-MDC under a base piperidine in CH3CN, with MPr-SMCC in the presence of a coupling reagent EDC, giving the desired coupled product SMCC-MDC in 60-70% yield over two steps. Anti-EGFR antibody Anti-EGFR antibody was diluted to 2.5 mg/mL in solution A (50 mM potassium phosphate, 50 mM NaCl, and 2 mM EDTA, pH 6.5). SMCC-MDC was added to give a ratio of SMCC-MDC to antibody of 7:1 mole equivalent. Then dimethylacetamide (DMA) was added to 15% (v/v) to the reaction and reaction was mixed by stirring for 4 h at ambient temperature. D-Lmcc-Anti-EGFR antibody conjugate was purified from excess unreacted or hydrolyzed reagent and excess SMCC-MDC using a G25 gel filtration column equilibrated in pH 7.4 phosphate buffer (aqueous). The conjugate was then dialyzed overnight into pH 7.4 phosphate buffer (aqueous) and filtered through a 0.22 μm filter for final storage. The number of SMCC-MDC molecule per antibody molecule in the final conjugate was measured by determining absorbance of the conjugate at 252 and 280 nm and using known extinction coefficients for SMCC-MDC and antibody at these two wavelengths. A ratio of maytansinoid compound to antibody of 3.5:1.0 was normally obtained.

Conditions: temp:50.01; pressure:0.00; stir:; See reaction.notes.procedure_details.

Procedure: To a solution of 4-amino-2-butyl-1-(2-hydroxy-2-methylpropyl)-7-methoxycarbonyl-1H-imidazo[4,5-c]quinoline S7 (37 mg, 0.1 mmol, 1.0 equiv) and 2,5-dioxopyrrolidin-1-yl 4-[(2,5-dioxo-2,5-dihydro-1H-pyrrol-1-yl)methyl]cyclohexanecarboxylate (66 mg, 0.20 mmol, 2.0 equiv) in DMF (2.0 mL) at 25° C. was added NEt3 (40 μL, 0.30 mmol, 3.0 equiv) in one injection. The reaction was heated at 50° C. for 24 h. The solvent was then removed in vacuo and the solid was redissolved in 1:9 MeOH/EtOAc (50 mL), washed successively with saturated NaHCO3 solution (15 mL), H2O (15 mL) and saturated aqueous NaCl (15 mL) and the organic layer concentrated. TLC and MS analysis indicated existence of both the imidazoquinoline starting material and the desired product. Purification by flash column chromatography on silica gel (CH2Cl2-1/9 MeOH/CH2Cl2, gradient) afforded the title compound 550 (40 mg, 68%) as a white solid: 1H NMR (CD3OD, 600 Hz) δ1.04 (t, J=7.2 Hz, 3H), 1.11-1.18 (m, 2H), 1.26 (br s, 6H), 1.51-1.66 (m, 4H), 1.68-1.85 (m, 3H), 1.91 (pent, J=7.2 Hz, 2H), 3.13 (t, J=7.2 Hz, 2H), 3.40 (d, J=7.2 Hz, 2H), 6.83 (s, 2H), 7.98 (d, J=9.0 Hz, 1H), 8.41 (d, J=9.0 Hz, 1H), 8.66 (s, 1H); 13C NMR (CD3OD, 150 Hz) δ 12.9, 22.3, 27.2, 28.5, 28.7, 29.5, 29.6, 36.6, 43.1, 45.4, 51.4, 54.9, 71.1, 119.9, 121.4, 123.7, 126.5, 126.6, 126.6, 128.0, 128.8, 130.5, 133.9, 135.2, 142.5, 144.3, 158.2, 159.9, 160.0, 166.8, 171.4; MS (APCI+): calcd C32H40N5O6 [M+H]+ 590.3. found 590.3. The solvent was then removed in vacuo the solid was redissolved in 1:9 MeOH/EtOAc (50 mL) washed successively with saturated NaHCO3 solution (15 mL), H2O (15 mL) and saturated aqueous NaCl (15 mL) the organic layer concentrated Purification by flash column chromatography on silica gel (CH2Cl2-1/9 MeOH/CH2Cl2, gradient)

Conditions: temp:50.01; pressure:0.00; stir:; See reaction.notes.procedure_details.

Procedure: To a solution of 4-amino-2-butyl-1-(2-hydroxy-2-methylpropyl)-7-methoxycarbonyl-1H-imidazo[4,5-c]quinoline S7 (37 mg, 0.1 mmol, 1.0 equiv) and 2,5-dioxopyrrolidin-1-yl 4-[(2,5-dioxo-2,5-dihydro-1H-pyrrol-1-yl)methyl]cyclohexanecarboxylate (66 mg, 0.20 mmol, 2.0 equiv) in DMF (2.0 mL) at 25° C. was added NEt3 (40 μL, 0.30 mmol, 3.0 equiv) in one injection. The reaction was heated at 50° C. for 24 h. The solvent was then removed in vacuo and the solid was redissolved in 1:9 MeOH/EtOAc (50 mL), washed successively with saturated NaHCO3 solution (15 mL), H2O (15 mL) and saturated aqueous NaCl (15 mL) and the organic layer concentrated. TLC and MS analysis indicated existence of both the imidazoquinoline starting material and the desired product. Purification by flash column chromatography on silica gel (CH2Cl2-1/9 MeOH/CH2Cl2, gradient) afforded the title compound 550 (40 mg, 68%) as a white solid: 1H NMR (CD3OD, 600 Hz) δ1.04 (t, J=7.2 Hz, 3H), 1.11-1.18 (m, 2H), 1.26 (br s, 6H), 1.51-1.66 (m, 4H), 1.68-1.85 (m, 3H), 1.91 (pent, J=7.2 Hz, 2H), 3.13 (t, J=7.2 Hz, 2H), 3.40 (d, J=7.2 Hz, 2H), 6.83 (s, 2H), 7.98 (d, J=9.0 Hz, 1H), 8.41 (d, J=9.0 Hz, 1H), 8.66 (s, 1H); 13C NMR (CD3OD, 150 Hz) δ 12.9, 22.3, 27.2, 28.5, 28.7, 29.5, 29.6, 36.6, 43.1, 45.4, 51.4, 54.9, 71.1, 119.9, 121.4, 123.7, 126.5, 126.6, 126.6, 128.0, 128.8, 130.5, 133.9, 135.2, 142.5, 144.3, 158.2, 159.9, 160.0, 166.8, 171.4; MS (APCI+): calcd C32H40N5O6 [M+H]+ 590.3. found 590.3. The solvent was then removed in vacuo the solid was redissolved in 1:9 MeOH/EtOAc (50 mL) washed successively with saturated NaHCO3 solution (15 mL), H2O (15 mL) and saturated aqueous NaCl (15 mL) the organic layer concentrated Purification by flash column chromatography on silica gel (CH2Cl2-1/9 MeOH/CH2Cl2, gradient)

Conditions: temp:0.00; pressure:0.00; stir:; See reaction.notes.procedure_details.

Procedure: SPDP-modified/DTT-reduced streptavidin is mixed with SMCC-modified BLA (equimolar ratio) and allowed to react for 1-2 hrs RT (or overnight at 4 degrees). The streptavidin-BLA conjugate product is purified by gel filtration over P-60 resin. to react for 1-2 hrs RT (or overnight at 4 degrees) The streptavidin-BLA conjugate product is purified by gel filtration over P-60 resin

Conditions: temp:0.00; pressure:0.00; stir:; See reaction.notes.procedure_details.

Procedure: SPDP-modified/DTT-reduced streptavidin is mixed with SMCC-modified BLA (equimolar ratio) and allowed to react for 1-2 hrs RT (or overnight at 4 degrees). The streptavidin-BLA conjugate product is purified by gel filtration over P-60 resin. to react for 1-2 hrs RT (or overnight at 4 degrees) The streptavidin-BLA conjugate product is purified by gel filtration over P-60 resin

Conditions: temp:0.00; pressure:0.00; stir:; See reaction.notes.procedure_details.

Procedure: The drug-linker SMCC-MDC was prepared in the following reactions: (1) 3-mercaptopropanoic acid (MPr) was reacted with N-succinimidyl 4-(maleimidomethyl)cyclohexane-1-carboxylate (SMCC) in the presence of DIEA, giving the MPr-SMCC at a yield of over 95%; Secondly, condensation of N-Me-L-Ala-MDC, which was prepared by deprotection of Fmoc-N-Me-Ala-MDC under a base piperidine in CH3CN, with MPr-SMCC under a coupling reagent EDC, giving the desired coupled product SMCC-MDC in 60-70% yield over two steps. Antibody Bat0206 (Abu) was diluted to 2.5 mg/mL in solution A (50 mM potassium phosphate, 50 mM NaCl, and 2 mM EDTA, pH 6.5). SMCC-MDC was added to give a ratio of SMCC-MDC to antibody of 7:1 mole equivalent. Then DMA was added to 15% (v/v) to the reaction and reaction was mixed by stirring for 4 h at ambient temperature. D-Lmcc-Bat0206 conjugate was purified from excess unreacted or hydrolyzed reagent and excess SMCC-MDC using a G25 gel filtration column equilibrated in pH 7.4 phosphate buffer (aqueous). The conjugate was then dialyzed overnight into pH 7.4 phosphate buffer (aqueous) and then filtered through a 0.22 μm filter for final storage. The number of SMCC-MDC molecule per Abu molecule in the final conjugate was measured by determining absorbance of the conjugate at 252 and 280 nm and using known extinction coefficients for SMCC-MDC and antibody at these two wavelengths. A ratio of maytansinoid compound to antibody of 3.5:1.0 was normally obtained.

Conditions: temp:0.00; pressure:0.00; stir:; See reaction.notes.procedure_details.

Procedure: The drug-linker SMCC-MDC was prepared in the following reactions: (1) 3-mercaptopropanoic acid (MPr) was reacted with N-succinimidyl 4-(maleimidomethyl)cyclohexane-1-carboxylate (SMCC) in the presence of DIEA, giving the MPr-SMCC at a yield of over 95%; Secondly, condensation of N-Me-L-Ala-MDC, which was prepared by deprotection of Fmoc-N-Me-Ala-MDC under a base piperidine in CH3CN, with MPr-SMCC under a coupling reagent EDC, giving the desired coupled product SMCC-MDC in 60-70% yield over two steps. Antibody Bat0206 (Abu) was diluted to 2.5 mg/mL in solution A (50 mM potassium phosphate, 50 mM NaCl, and 2 mM EDTA, pH 6.5). SMCC-MDC was added to give a ratio of SMCC-MDC to antibody of 7:1 mole equivalent. Then DMA was added to 15% (v/v) to the reaction and reaction was mixed by stirring for 4 h at ambient temperature. D-Lmcc-Bat0206 conjugate was purified from excess unreacted or hydrolyzed reagent and excess SMCC-MDC using a G25 gel filtration column equilibrated in pH 7.4 phosphate buffer (aqueous). The conjugate was then dialyzed overnight into pH 7.4 phosphate buffer (aqueous) and then filtered through a 0.22 μm filter for final storage. The number of SMCC-MDC molecule per Abu molecule in the final conjugate was measured by determining absorbance of the conjugate at 252 and 280 nm and using known extinction coefficients for SMCC-MDC and antibody at these two wavelengths. A ratio of maytansinoid compound to antibody of 3.5:1.0 was normally obtained.

Conditions: temp:0.00; pressure:0.00; stir:; See reaction.notes.procedure_details.

Procedure: The drug-linker SMCC-MDC was prepared in the following reactions: (1) 3-mercaptopropanoic acid (MPr) was reacted with N-succinimidyl 4-(maleimidomethyl)cyclohexane-1-carboxylate (SMCC) in the presence of DIEA, giving the MPr-SMCC at a yield of over 95%; Secondly, condensation of N-Me-L-Ala-MDC, which was prepared by deprotection of Fmoc-N-Me-Ala-MDC under a base piperidine in CH3CN, with MPr-SMCC under a coupling reagent EDC, giving the desired coupled product SMCC-MDC in 60-70% yield over two steps. Antibody Bat0206 (Abu) was diluted to 2.5 mg/mL in solution A (50 mM potassium phosphate, 50 mM NaCl, and 2 mM EDTA, pH 6.5). SMCC-MDC was added to give a ratio of SMCC-MDC to antibody of 7:1 mole equivalent. Then DMA was added to 15% (v/v) to the reaction and reaction was mixed by stirring for 4 h at ambient temperature. D-Lmcc-Bat0206 conjugate was purified from excess unreacted or hydrolyzed reagent and excess SMCC-MDC using a G25 gel filtration column equilibrated in pH 7.4 phosphate buffer (aqueous). The conjugate was then dialyzed overnight into pH 7.4 phosphate buffer (aqueous) and then filtered through a 0.22 μm filter for final storage. The number of SMCC-MDC molecule per Abu molecule in the final conjugate was measured by determining absorbance of the conjugate at 252 and 280 nm and using known extinction coefficients for SMCC-MDC and antibody at these two wavelengths. A ratio of maytansinoid compound to antibody of 3.5:1.0 was normally obtained.

Conditions: temp:0.00; pressure:0.00; stir:; See reaction.notes.procedure_details.

Procedure: The drug-linker SMCC-MDC was prepared in the following reactions: (1) 3-mercaptopropanoic acid (MPr) was reacted with N-succinimidyl 4-(maleimidomethyl)cyclohexane-1-carboxylate (SMCC) in the presence of DIEA, giving the MPr-SMCC at a yield of over 95%; Secondly, condensation of N-Me-L-Ala-MDC, which was prepared by deprotection of Fmoc-N-Me-Ala-MDC under a base piperidine in CH3CN, with MPr-SMCC under a coupling reagent EDC, giving the desired coupled product SMCC-MDC in 60-70% yield over two steps. Antibody Bat0206 (Abu) was diluted to 2.5 mg/mL in solution A (50 mM potassium phosphate, 50 mM NaCl, and 2 mM EDTA, pH 6.5). SMCC-MDC was added to give a ratio of SMCC-MDC to antibody of 7:1 mole equivalent. Then DMA was added to 15% (v/v) to the reaction and reaction was mixed by stirring for 4 h at ambient temperature. D-Lmcc-Bat0206 conjugate was purified from excess unreacted or hydrolyzed reagent and excess SMCC-MDC using a G25 gel filtration column equilibrated in pH 7.4 phosphate buffer (aqueous). The conjugate was then dialyzed overnight into pH 7.4 phosphate buffer (aqueous) and then filtered through a 0.22 μm filter for final storage. The number of SMCC-MDC molecule per Abu molecule in the final conjugate was measured by determining absorbance of the conjugate at 252 and 280 nm and using known extinction coefficients for SMCC-MDC and antibody at these two wavelengths. A ratio of maytansinoid compound to antibody of 3.5:1.0 was normally obtained.