(1S)-2-(4-methylphenyl)-1-phenylethanamine

Conditions: temp:0.00; pressure:0.00; stir:; See reaction.notes.procedure_details.

Procedure: An eggplant type flask was charged with 133 mg of potassium cyanide, 1.0 g of (S)-1-phenyl-2-p-tolylethylamine and 1 ml of water. After adding 146 mg of ethyl 1-formylcyclopropane-1-carboxylate dissolved in 2.5 ml of ethanol, dropwise at room temperature, the resulting mixture was further mixed with 0.2 ml of concentrated hydrochloric acid, and stirred for 1 hour at the same temperature and then for 2 hours at 50° C. After confirming completion of the reaction, the reaction solution was mixed with ice water and extracted with ethyl acetate. Next, the resulting organic layer was washed with water and saturated brine, and dried over anhydrous magnesium sulfate and, after removing insoluble matter by filtration, the solvent was evaporated under a reduced pressure. Thereafter, the resulting residue was subjected to a silica gel column chromatography (hexane:ethyl acetate=10:1) to obtain 251 mg (67%) of a diastereomer mixture in the form of colorless oil. Formation ratio of the two diastereomers was found to be 4:1 based on the integral ratio of NMR. for 2 hours at 50° C completion of the reaction extracted with ethyl acetate Next, the resulting organic layer was washed with water and saturated brine dried over anhydrous magnesium sulfate after removing insoluble matter by filtration the solvent was evaporated under a reduced pressure

Conditions: temp:0.00; pressure:0.00; stir:; See reaction.notes.procedure_details.

Procedure: Following a procedure similar to that described in Example 3(b), but using S-2-pyridyl 3-cyanoandrosta-3,5-diene-17β-thiocarboxylate [prepared as described in Example 3(a)] and (S)-2-(4-methylphenyl)-1-phenylethylamine as starting materials, in relative proportions similar to those used in that Example, the title compound was obtained in a yield of 77%.

Conditions: temp:0.00; pressure:0.00; stir:; See reaction.notes.procedure_details.

Procedure: Following a procedure similar to that described in Example 3(b), but using S-2-pyridyl 3-cyanoandrosta-3,5-diene-17β-thiocarboxylate [prepared as described in Example 3(a)] and (S)-2-(4-methylphenyl)-1-phenylethylamine as starting materials, in relative proportions similar to those used in that Example, the title compound was obtained in a yield of 77%.

Conditions: temp:0.00; pressure:0.00; stir:; See reaction.notes.procedure_details.

Procedure: An eggplant type flask was charged with 133 mg of potassium cyanide, 1.0 g of (S)-1-phenyl-2-p-tolylethylamine and 1 ml of water. After adding 146 mg of ethyl 1-formylcyclopropane-1-carboxylate dissolved in 2.5 ml of ethanol, dropwise at room temperature, the resulting mixture was further mixed with 0.2 ml of concentrated hydrochloric acid, and stirred for 1 hour at the same temperature and then for 2 hours at 50° C. After confirming completion of the reaction, the reaction solution was mixed with ice water and extracted with ethyl acetate. Next, the resulting organic layer was washed with water and saturated brine, and dried over anhydrous magnesium sulfate and, after removing insoluble matter by filtration, the solvent was evaporated under a reduced pressure. Thereafter, the resulting residue was subjected to a silica gel column chromatography (hexane:ethyl acetate=10:1) to obtain 251 mg (67%) of a diastereomer mixture in the form of colorless oil. Formation ratio of the two diastereomers was found to be 4:1 based on the integral ratio of NMR. for 2 hours at 50° C completion of the reaction extracted with ethyl acetate Next, the resulting organic layer was washed with water and saturated brine dried over anhydrous magnesium sulfate after removing insoluble matter by filtration the solvent was evaporated under a reduced pressure

Conditions: temp:0.00; pressure:0.00; stir:; See reaction.notes.procedure_details.

Procedure: An eggplant type flask was charged with 133 mg of potassium cyanide, 1.0 g of (S)-1-phenyl-2-p-tolylethylamine and 1 ml of water. After adding 146 mg of ethyl 1-formylcyclopropane-1-carboxylate dissolved in 2.5 ml of ethanol, dropwise at room temperature, the resulting mixture was further mixed with 0.2 ml of concentrated hydrochloric acid, and stirred for 1 hour at the same temperature and then for 2 hours at 50° C. After confirming completion of the reaction, the reaction solution was mixed with ice water and extracted with ethyl acetate. Next, the resulting organic layer was washed with water and saturated brine, and dried over anhydrous magnesium sulfate and, after removing insoluble matter by filtration, the solvent was evaporated under a reduced pressure. Thereafter, the resulting residue was subjected to a silica gel column chromatography (hexane:ethyl acetate=10:1) to obtain 251 mg (67%) of a diastereomer mixture in the form of colorless oil. Formation ratio of the two diastereomers was found to be 4:1 based on the integral ratio of NMR. for 2 hours at 50° C completion of the reaction extracted with ethyl acetate Next, the resulting organic layer was washed with water and saturated brine dried over anhydrous magnesium sulfate after removing insoluble matter by filtration the solvent was evaporated under a reduced pressure

Conditions: temp:0.00; pressure:0.00; stir:; See reaction.notes.procedure_details.

Procedure: An eggplant type flask was charged with 133 mg of potassium cyanide, 1.0 g of (S)-1-phenyl-2-p-tolylethylamine and 1 ml of water. After adding 146 mg of ethyl 1-formylcyclopropane-1-carboxylate dissolved in 2.5 ml of ethanol, dropwise at room temperature, the resulting mixture was further mixed with 0.2 ml of concentrated hydrochloric acid, and stirred for 1 hour at the same temperature and then for 2 hours at 50° C. After confirming completion of the reaction, the reaction solution was mixed with ice water and extracted with ethyl acetate. Next, the resulting organic layer was washed with water and saturated brine, and dried over anhydrous magnesium sulfate and, after removing insoluble matter by filtration, the solvent was evaporated under a reduced pressure. Thereafter, the resulting residue was subjected to a silica gel column chromatography (hexane:ethyl acetate=10:1) to obtain 251 mg (67%) of a diastereomer mixture in the form of colorless oil. Formation ratio of the two diastereomers was found to be 4:1 based on the integral ratio of NMR. for 2 hours at 50° C completion of the reaction extracted with ethyl acetate Next, the resulting organic layer was washed with water and saturated brine dried over anhydrous magnesium sulfate after removing insoluble matter by filtration the solvent was evaporated under a reduced pressure

Conditions: temp:0.00; pressure:0.00; stir:; See reaction.notes.procedure_details.

Procedure: Following a procedure similar to that described in Example 3(b), but using S-2-pyridyl 3-cyanoandrosta-3,5-diene-17β-thiocarboxylate [prepared as described in Example 3(a)] and (S)-2-(4-methylphenyl)-1-phenylethylamine as starting materials, in relative proportions similar to those used in that Example, the title compound was obtained in a yield of 77%.

Conditions: temp:0.00; pressure:0.00; stir:; See reaction.notes.procedure_details.

Procedure: Following a procedure similar to that described in Example 3(b), but using S-2-pyridyl 3-cyanoandrosta-3,5-diene-17β-thiocarboxylate [prepared as described in Example 3(a)] and (S)-2-(4-methylphenyl)-1-phenylethylamine as starting materials, in relative proportions similar to those used in that Example, the title compound was obtained in a yield of 77%.

Conditions: temp:0.00; pressure:0.00; stir:; See reaction.notes.procedure_details.

Procedure: The title compound was prepared in a yield of 58% in a similar manner to that described in Example 1 by reacting 4-methyl-3-oxo-4-azaandrost-5-ene-17β-carboxylic acid (prepared as described in Preparation 5) and (S)-1-phenyl-2-(4-methylphenyl)ethylamine.

Conditions: temp:0.00; pressure:0.00; stir:; See reaction.notes.procedure_details.

Procedure: The title compound was prepared in a yield of 81% in a similar manner to that described in Example 1 by reacting 3-oxo-4-azaandrost-5-ene-17β-carboxylic acid and (S)-1-phenyl-2-(4-methylphenyl)ethylamine.

Conditions: temp:0.00; pressure:0.00; stir:; See reaction.notes.procedure_details.

Procedure: Following a procedure similar to that described in Example 3(b), but using S-2-pyridyl 3-cyanoandrosta-3,5-diene-17β-thiocarboxylate [prepared as described in Example 3(a)] and (S)-2-(4-methylphenyl)-1-phenylethylamine as starting materials, in relative proportions similar to those used in that Example, the title compound was obtained in a yield of 77%.

Conditions: temp:0.00; pressure:0.00; stir:; See reaction.notes.procedure_details.

Procedure: Following a procedure similar to that described in Example 3(b), but using S-2-pyridyl 3-cyanoandrosta-3,5-diene-17β-thiocarboxylate [prepared as described in Example 3(a)] and (S)-2-(4-methylphenyl)-1-phenylethylamine as starting materials, in relative proportions similar to those used in that Example, the title compound was obtained in a yield of 77%.