3-sulfamoylpropyl acetate

Conditions: temp:0.00; pressure:0.00; stir:

Conditions: temp:0.00; pressure:0.00; stir:

Conditions: temp:60.01; pressure:0.00; stir:; See reaction.notes.procedure_details.

Procedure: To a suspension of 300 mg of 8-(cyclohexylmethoxy)-2-methylimidazo[1,2-a]pyridine-3-carboxylic acid in 5 ml of THF was added 253 mg of 1,1′-carbonyldiimidazole, followed by stirring at 60° C. for 1 hour. Subsequently, 283 mg of 3-(aminosulfonyl)propyl acetate and 389 μl of 1,8-diazabicyclo[5.4.0]-7-undecene were added thereto under ice-cooling, followed by stirring at room temperature overnight. To the reaction mixture were added water and ethyl acetate to carry out a layer separation operation. The organic layer was washed with saturated brine and dried over anhydrous sodium sulfate, the solvent was evaporated under reduced pressure, and the obtained residue was purified by silica gel column chromatography. Since the reaction was not completed, to the obtained purified product were added again 57 mg of 3-(aminosulfonyl)propyl acetate, 60 mg of N-[3-(dimethylamino)propyl]-N′-ethylcarbodiimide hydrochloride, 38 mg of 4-(dimethylamino)pyridine, and 2 ml of DMF, followed by stirring at room temperature overnight. To the reaction mixture were added a saturated aqueous ammonium chloride solution and chloroform to carry out a layer separation operation. The organic layer was dried over anhydrous sodium sulfate, the solvent was evaporated under reduced pressure, and the obtained residue was purified by silica gel column chromatography. To the obtained product were added ethyl acetate and ethanol, followed by stirring. The resulting solid was collected by filtration and dried to obtain 149 mg of 3-[({[8-(cyclohexylmethoxy)-2-methylimidazo[1,2-a]pyridin-3-yl]carbonyl}amino)sulfonyl]propyl acetate. under ice-cooling by stirring at room temperature overnight a layer separation operation The organic layer was washed with saturated brine dried over anhydrous sodium sulfate the solvent was evaporated under reduced pressure the obtained residue was purified by silica gel column chromatography purified product were added again 57 mg of 3-(aminosulfonyl)propyl acetate, 60 mg of N-[3-(dimethylamino)propyl]-N′-ethylcarbodiimide hydrochloride, 38 mg of 4-(dimethylamino)pyridine, and 2 ml of DMF by stirring at room temperature overnight To the reaction mixture were added a saturated aqueous ammonium chloride solution and chloroform a layer separation operation The organic layer was dried over anhydrous sodium sulfate the solvent was evaporated under reduced pressure the obtained residue was purified by silica gel column chromatography To the obtained product were added ethyl acetate and ethanol by stirring The resulting solid was collected by filtration dried

Conditions: temp:0.00; pressure:0.00; stir:

Conditions: temp:60.01; pressure:0.00; stir:; See reaction.notes.procedure_details.

Procedure: To a suspension of 300 mg of 8-(cyclohexylmethoxy)-2-methylimidazo[1,2-a]pyridine-3-carboxylic acid in 5 ml of THF was added 253 mg of 1,1′-carbonyldiimidazole, followed by stirring at 60° C. for 1 hour. Subsequently, 283 mg of 3-(aminosulfonyl)propyl acetate and 389 μl of 1,8-diazabicyclo[5.4.0]-7-undecene were added thereto under ice-cooling, followed by stirring at room temperature overnight. To the reaction mixture were added water and ethyl acetate to carry out a layer separation operation. The organic layer was washed with saturated brine and dried over anhydrous sodium sulfate, the solvent was evaporated under reduced pressure, and the obtained residue was purified by silica gel column chromatography. Since the reaction was not completed, to the obtained purified product were added again 57 mg of 3-(aminosulfonyl)propyl acetate, 60 mg of N-[3-(dimethylamino)propyl]-N′-ethylcarbodiimide hydrochloride, 38 mg of 4-(dimethylamino)pyridine, and 2 ml of DMF, followed by stirring at room temperature overnight. To the reaction mixture were added a saturated aqueous ammonium chloride solution and chloroform to carry out a layer separation operation. The organic layer was dried over anhydrous sodium sulfate, the solvent was evaporated under reduced pressure, and the obtained residue was purified by silica gel column chromatography. To the obtained product were added ethyl acetate and ethanol, followed by stirring. The resulting solid was collected by filtration and dried to obtain 149 mg of 3-[({[8-(cyclohexylmethoxy)-2-methylimidazo[1,2-a]pyridin-3-yl]carbonyl}amino)sulfonyl]propyl acetate. under ice-cooling by stirring at room temperature overnight a layer separation operation The organic layer was washed with saturated brine dried over anhydrous sodium sulfate the solvent was evaporated under reduced pressure the obtained residue was purified by silica gel column chromatography purified product were added again 57 mg of 3-(aminosulfonyl)propyl acetate, 60 mg of N-[3-(dimethylamino)propyl]-N′-ethylcarbodiimide hydrochloride, 38 mg of 4-(dimethylamino)pyridine, and 2 ml of DMF by stirring at room temperature overnight To the reaction mixture were added a saturated aqueous ammonium chloride solution and chloroform a layer separation operation The organic layer was dried over anhydrous sodium sulfate the solvent was evaporated under reduced pressure the obtained residue was purified by silica gel column chromatography To the obtained product were added ethyl acetate and ethanol by stirring The resulting solid was collected by filtration dried

Conditions: temp:0.00; pressure:0.00; stir:; See reaction.notes.procedure_details.

Procedure: To a solution of 4′-[[2-[(tert-butoxycarbonyl)[(2R)-2-(3-chlorophenyl)-2-hydroxyethyl]amino]ethyl]amino]-3-isobutoxy-4-biphenylcarboxylic acid (60.0 mg) in N,N-dimethylformamide (0.450 ml) was added 1,1′-carbonylbis-1H-imidazole (18.3 mg) and the mixture was stirred at room temperature for 1.5 hours under nitrogen atmosphere. To the mixture were added 2,3,4,6,7,8,9,10-octahydropyrimido-[1,2-a]azepine (0.0185 ml) and a solution of 3-(aminosulfonyl)propyl acetate (22.4 mg) in N,N-dimethylformamide (0.300 ml) and the mixture was stirred at room temperature for 2 days. The reaction mixture was warmed to 120° C. and stirred at the same temperature for 2 hours. After cooling to room temperature, the reaction mixture was extracted with ethyl acetate, washed with water and brine and dried over magnesium sulfate. Filtration followed by evaporation gave the crude product which was purified by column chromatography on silica gel (eluent: hexane/ethyl acetate=1/3 to 1/1) to give 3-[[[[4′-[[2-[(tert-butoxycarbonyl)[(2R)-2-(3-chlorophenyl)-2-hydroxyethyl]amino]ethyl]amino]-3-isobutoxy-4-biphenylyl]carbonyl]amino]sulfonyl]propyl acetate (34.1 mg) as a yellow paste. The reaction mixture was warmed to 120° C. stirred at the same temperature for 2 hours After cooling to room temperature the reaction mixture was extracted with ethyl acetate washed with water and brine dried over magnesium sulfate Filtration followed by evaporation gave the crude product which was purified by column chromatography on silica gel (eluent: hexane/ethyl acetate=1/3 to 1/1)

Conditions: temp:0.00; pressure:0.00; stir:; See reaction.notes.procedure_details.

Procedure: To a solution of 4′-[2-[(tert-butoxycarbonyl)[(2R)-2-(3-chlorophenyl)-2-hydroxyethyl]amino]ethyl]-3-(isopropylthio)-4-biphenylcarboxylic acid (150 mg) in tetrahydrofuran (1.5 ml) was added N,N′-carbonyldiimidazole (64 mg) and stirred at room temperature for 30 minutes. To the mixture were added 3-(aminosulfonyl)propyl acetate (67 mg) and 1,8-diazabicyclo[5.4.0]-7-undecene (55 μl) and stirred at room temperature, and then stirred at 50° C. for 3 hours. The reaction mixture was poured into 0.1N hydrochloric acid and ethyl acetate and the organic layer was separated. The organic layer was washed with water and brine, dried over magnesium sulfate and concentrated in vacuo to give 3-[[[[4′-[2-[(tert-butoxycarbonyl)[(2R)-2-(3-chlorophenyl)-2-hydroxyethyl]amino]ethyl]-3-(isopropylthio)-4-biphenylyl]carbonyl]amino]sulfonyl]propyl acetate (72 mg). To a solution of the product (72 mg) in methanol (2.0 ml) and tetrahydrofuran (2.0 ml) was added sodium hydroxide aqueous solution (1N, 532 μl) and stirred at room temperature for 10 minutes. To the mixture was added hydrochloric acid aqueous solution (1N, 532 μl) and diluted with ethyl acetate. The solution was poured into water and ethyl acetate and the organic layer was separated. The organic layer was washed with water and brine, dried over magnesium sulfate and concentrated in vacuo. The residue was purified with silica gel column chromatography to give tert-butyl [(2R)-2-(3-chlorophenyl)-2-hydroxyethyl][2-[4′-[[[(3-hydroxypropyl)sulfonyl]amino]carbonyl]-3′-(isopropylthio)-4-biphenylyl]-ethyl]carbamate (49 mg). stirred at room temperature stirred at 50° C. for 3 hours the organic layer was separated The organic layer was washed with water and brine dried over magnesium sulfate concentrated in vacuo

Conditions: temp:0.00; pressure:0.00; stir:; See reaction.notes.procedure_details.

Procedure: To a mixture of 4-[(1S)-1-({[1-(4-chlorobenzyl)-1H-indol-7-yl]carbonyl}amino)ethyl]benzoic acid (250 mg) and DMF (5 mL) was added 1,1′-carbonyldiimidazole (187 mgl) at room temperature, followed by stirring for 5 minutes, and then 3-(aminosulfonyl)propylacetate (209 mg) and 1,8-diazabicyclo[5.4.0]undec-7-ene (173 μL) were added in this order, followed by stirring for 3 days. The reaction mixture was ice-cooled, and 10% aqueous citric acid (30 mL) was added thereto, followed by stirring for 30 minutes. The precipitated solid was collected by filtration and washed with cold ethanol (4 mL) to obtain 1-(4-chlorobenzyl)-N-[(1S)-1-(4-{[(3-acetoxypropyl)sulfonyl]carbamoyl}phenyl)ethyl]-1H-indole-7-carboxamide (210 mg) as a pale yellow solid. by stirring for 3 days cooled by stirring for 30 minutes The precipitated solid was collected by filtration washed with cold ethanol (4 mL)

Conditions: temp:60.01; pressure:0.00; stir:; See reaction.notes.procedure_details.

Procedure: To a suspension of 300 mg of 8-(cyclohexylmethoxy)-2-methylimidazo[1,2-a]pyridine-3-carboxylic acid in 5 ml of THF was added 253 mg of 1,1′-carbonyldiimidazole, followed by stirring at 60° C. for 1 hour. Subsequently, 283 mg of 3-(aminosulfonyl)propyl acetate and 389 μl of 1,8-diazabicyclo[5.4.0]-7-undecene were added thereto under ice-cooling, followed by stirring at room temperature overnight. To the reaction mixture were added water and ethyl acetate to carry out a layer separation operation. The organic layer was washed with saturated brine and dried over anhydrous sodium sulfate, the solvent was evaporated under reduced pressure, and the obtained residue was purified by silica gel column chromatography. Since the reaction was not completed, to the obtained purified product were added again 57 mg of 3-(aminosulfonyl)propyl acetate, 60 mg of N-[3-(dimethylamino)propyl]-N′-ethylcarbodiimide hydrochloride, 38 mg of 4-(dimethylamino)pyridine, and 2 ml of DMF, followed by stirring at room temperature overnight. To the reaction mixture were added a saturated aqueous ammonium chloride solution and chloroform to carry out a layer separation operation. The organic layer was dried over anhydrous sodium sulfate, the solvent was evaporated under reduced pressure, and the obtained residue was purified by silica gel column chromatography. To the obtained product were added ethyl acetate and ethanol, followed by stirring. The resulting solid was collected by filtration and dried to obtain 149 mg of 3-[({[8-(cyclohexylmethoxy)-2-methylimidazo[1,2-a]pyridin-3-yl]carbonyl}amino)sulfonyl]propyl acetate. under ice-cooling by stirring at room temperature overnight a layer separation operation The organic layer was washed with saturated brine dried over anhydrous sodium sulfate the solvent was evaporated under reduced pressure the obtained residue was purified by silica gel column chromatography purified product were added again 57 mg of 3-(aminosulfonyl)propyl acetate, 60 mg of N-[3-(dimethylamino)propyl]-N′-ethylcarbodiimide hydrochloride, 38 mg of 4-(dimethylamino)pyridine, and 2 ml of DMF by stirring at room temperature overnight To the reaction mixture were added a saturated aqueous ammonium chloride solution and chloroform a layer separation operation The organic layer was dried over anhydrous sodium sulfate the solvent was evaporated under reduced pressure the obtained residue was purified by silica gel column chromatography To the obtained product were added ethyl acetate and ethanol by stirring The resulting solid was collected by filtration dried