N-tert-butylfuran-2-carboxamide

Conditions: temp:0.00; pressure:0.00; stir:

Conditions: temp:0.00; pressure:0.00; stir:; See reaction.notes.procedure_details.

Procedure: To a stirring solution of N-tert-butylfuran-2-carboxamide (1.8 ml, 12 mmol) in 100 mL DME under argon at −78° C. was added tert-butyllithium, 1.7 M solution in pentane (14 ml, 24 mmol) slowly dropwise over 5 min. The heterogeneous reaction mixture was allowed to stir 1 h, at which point a solution of N-tert-butylfuran-2-carboxamide (1.8 ml, 12 mmol) in 10 mL DME was added over 5 min, dropwise. After 15 min, the bath was removed and the reaction was allowed to warm to ambient temperature. The reaction was quenched by addition of saturated aqueous ammonium chloride, water, and EtOAc. The organic layer was dried over anhydrous sodium sulfate, filtered, and concentrated in vacuo. The resulting material was purified by silica gel chromatography, ISCO, 80 g, 0-40% EtOAc/hexanes over 33 min to give a semi-solid. This material was triturated 3× hexanes to give 3-benzoyl-N-tert-butylfuran-2-carboxamide as white crystals. MS m/z=272 [M+H]+. Calc'd for C16H17NO3: 271.3. was added over 5 min the bath was removed The reaction was quenched by addition of saturated aqueous ammonium chloride, water, and EtOAc The organic layer was dried over anhydrous sodium sulfate filtered concentrated in vacuo The resulting material was purified by silica gel chromatography, ISCO, 80 g, 0-40% EtOAc/hexanes over 33 min to give a semi-solid This material was triturated 3× hexanes

Conditions: temp:0.00; pressure:0.00; stir:; See reaction.notes.procedure_details.

Procedure: To a stirring solution of N-tert-butylfuran-2-carboxamide (1.8 ml, 12 mmol) in 100 mL DME under argon at −78° C. was added tert-butyllithium, 1.7 M solution in pentane (14 ml, 24 mmol) slowly dropwise over 5 min. The heterogeneous reaction mixture was allowed to stir 1 h, at which point a solution of N-tert-butylfuran-2-carboxamide (1.8 ml, 12 mmol) in 10 mL DME was added over 5 min, dropwise. After 15 min, the bath was removed and the reaction was allowed to warm to ambient temperature. The reaction was quenched by addition of saturated aqueous ammonium chloride, water, and EtOAc. The organic layer was dried over anhydrous sodium sulfate, filtered, and concentrated in vacuo. The resulting material was purified by silica gel chromatography, ISCO, 80 g, 0-40% EtOAc/hexanes over 33 min to give a semi-solid. This material was triturated 3× hexanes to give 3-benzoyl-N-tert-butylfuran-2-carboxamide as white crystals. MS m/z=272 [M+H]+. Calc'd for C16H17NO3: 271.3. was added over 5 min the bath was removed The reaction was quenched by addition of saturated aqueous ammonium chloride, water, and EtOAc The organic layer was dried over anhydrous sodium sulfate filtered concentrated in vacuo The resulting material was purified by silica gel chromatography, ISCO, 80 g, 0-40% EtOAc/hexanes over 33 min to give a semi-solid This material was triturated 3× hexanes

Conditions: temp:0.00; pressure:0.00; stir:; See reaction.notes.procedure_details.

Procedure: To a slurry of furan-2-carboxylic acid (10.0 g, 89 mmol) in 100 mL DCM at 0° C. under nitrogen was added DMF (0.069 ml, 0.89 mmol) and oxalyl chloride (9.9 ml, 112 mmol) slowly in small portions over 5 min. The reaction was allowed to warm to ambient temperature. After 3 h, the clear solution was concentrated in vacuo and the resulting oil was dissolved in 75 mL THF and cooled to 0° C. A solution of tert-butylamine (28 ml, 268 mmol) in 25 mL THF was added dropwise over 1 h. The bath was allowed to expire and the slurry was stirred over the weekend. The reaction was concentrated in vacuo and partitioned between 1N NaOH and DCM. The aqueous layer was extracted twice with DCM. The combined organic layers were concentrated in vacuo to give N-tert-butylfuran-2-carboxamide as a white solid. MS m/z=168 [M+H]+. Calc'd for C9H13NO2: 167.2. the clear solution was concentrated in vacuo the resulting oil was dissolved in 75 mL THF cooled to 0° C The reaction was concentrated in vacuo partitioned between 1N NaOH and DCM The aqueous layer was extracted twice with DCM The combined organic layers were concentrated in vacuo

Conditions: temp:0.00; pressure:0.00; stir:; See reaction.notes.procedure_details.

Procedure: To a stirring solution of N-tert-butylfuran-2-carboxamide (1.8 ml, 12 mmol) in 100 mL DME under argon at −78° C. was added tert-butyllithium, 1.7 M solution in pentane (14 ml, 24 mmol) slowly dropwise over 5 min. The heterogeneous reaction mixture was allowed to stir 1 h, at which point a solution of N-tert-butylfuran-2-carboxamide (1.8 ml, 12 mmol) in 10 mL DME was added over 5 min, dropwise. After 15 min, the bath was removed and the reaction was allowed to warm to ambient temperature. The reaction was quenched by addition of saturated aqueous ammonium chloride, water, and EtOAc. The organic layer was dried over anhydrous sodium sulfate, filtered, and concentrated in vacuo. The resulting material was purified by silica gel chromatography, ISCO, 80 g, 0-40% EtOAc/hexanes over 33 min to give a semi-solid. This material was triturated 3× hexanes to give 3-benzoyl-N-tert-butylfuran-2-carboxamide as white crystals. MS m/z=272 [M+H]+. Calc'd for C16H17NO3: 271.3. was added over 5 min the bath was removed The reaction was quenched by addition of saturated aqueous ammonium chloride, water, and EtOAc The organic layer was dried over anhydrous sodium sulfate filtered concentrated in vacuo The resulting material was purified by silica gel chromatography, ISCO, 80 g, 0-40% EtOAc/hexanes over 33 min to give a semi-solid This material was triturated 3× hexanes

Conditions: temp:0.00; pressure:0.00; stir:; See reaction.notes.procedure_details.

Procedure: To a slurry of furan-2-carboxylic acid (10.0 g, 89 mmol) in 100 mL DCM at 0° C. under nitrogen was added DMF (0.069 ml, 0.89 mmol) and oxalyl chloride (9.9 ml, 112 mmol) slowly in small portions over 5 min. The reaction was allowed to warm to ambient temperature. After 3 h, the clear solution was concentrated in vacuo and the resulting oil was dissolved in 75 mL THF and cooled to 0° C. A solution of tert-butylamine (28 ml, 268 mmol) in 25 mL THF was added dropwise over 1 h. The bath was allowed to expire and the slurry was stirred over the weekend. The reaction was concentrated in vacuo and partitioned between 1N NaOH and DCM. The aqueous layer was extracted twice with DCM. The combined organic layers were concentrated in vacuo to give N-tert-butylfuran-2-carboxamide as a white solid. MS m/z=168 [M+H]+. Calc'd for C9H13NO2: 167.2. the clear solution was concentrated in vacuo the resulting oil was dissolved in 75 mL THF cooled to 0° C The reaction was concentrated in vacuo partitioned between 1N NaOH and DCM The aqueous layer was extracted twice with DCM The combined organic layers were concentrated in vacuo

Conditions: temp:0.00; pressure:0.00; stir:; See reaction.notes.procedure_details.

Procedure: To a slurry of furan-2-carboxylic acid (10.0 g, 89 mmol) in 100 mL DCM at 0° C. under nitrogen was added DMF (0.069 ml, 0.89 mmol) and oxalyl chloride (9.9 ml, 112 mmol) slowly in small portions over 5 min. The reaction was allowed to warm to ambient temperature. After 3 h, the clear solution was concentrated in vacuo and the resulting oil was dissolved in 75 mL THF and cooled to 0° C. A solution of tert-butylamine (28 ml, 268 mmol) in 25 mL THF was added dropwise over 1 h. The bath was allowed to expire and the slurry was stirred over the weekend. The reaction was concentrated in vacuo and partitioned between 1N NaOH and DCM. The aqueous layer was extracted twice with DCM. The combined organic layers were concentrated in vacuo to give N-tert-butylfuran-2-carboxamide as a white solid. MS m/z=168 [M+H]+. Calc'd for C9H13NO2: 167.2. the clear solution was concentrated in vacuo the resulting oil was dissolved in 75 mL THF cooled to 0° C The reaction was concentrated in vacuo partitioned between 1N NaOH and DCM The aqueous layer was extracted twice with DCM The combined organic layers were concentrated in vacuo

Conditions: temp:0.00; pressure:0.00; stir:; See reaction.notes.procedure_details.

Procedure: To a stirring solution of N-tert-butylfuran-2-carboxamide (1.8 ml, 12 mmol) in 100 mL DME under argon at −78° C. was added tert-butyllithium, 1.7 M solution in pentane (14 ml, 24 mmol) slowly dropwise over 5 min. The heterogeneous reaction mixture was allowed to stir 1 h, at which point a solution of N-tert-butylfuran-2-carboxamide (1.8 ml, 12 mmol) in 10 mL DME was added over 5 min, dropwise. After 15 min, the bath was removed and the reaction was allowed to warm to ambient temperature. The reaction was quenched by addition of saturated aqueous ammonium chloride, water, and EtOAc. The organic layer was dried over anhydrous sodium sulfate, filtered, and concentrated in vacuo. The resulting material was purified by silica gel chromatography, ISCO, 80 g, 0-40% EtOAc/hexanes over 33 min to give a semi-solid. This material was triturated 3× hexanes to give 3-benzoyl-N-tert-butylfuran-2-carboxamide as white crystals. MS m/z=272 [M+H]+. Calc'd for C16H17NO3: 271.3. was added over 5 min the bath was removed The reaction was quenched by addition of saturated aqueous ammonium chloride, water, and EtOAc The organic layer was dried over anhydrous sodium sulfate filtered concentrated in vacuo The resulting material was purified by silica gel chromatography, ISCO, 80 g, 0-40% EtOAc/hexanes over 33 min to give a semi-solid This material was triturated 3× hexanes

Conditions: temp:0.00; pressure:0.00; stir:; See reaction.notes.procedure_details.

Procedure: To a slurry of furan-2-carboxylic acid (10.0 g, 89 mmol) in 100 mL DCM at 0° C. under nitrogen was added DMF (0.069 ml, 0.89 mmol) and oxalyl chloride (9.9 ml, 112 mmol) slowly in small portions over 5 min. The reaction was allowed to warm to ambient temperature. After 3 h, the clear solution was concentrated in vacuo and the resulting oil was dissolved in 75 mL THF and cooled to 0° C. A solution of tert-butylamine (28 ml, 268 mmol) in 25 mL THF was added dropwise over 1 h. The bath was allowed to expire and the slurry was stirred over the weekend. The reaction was concentrated in vacuo and partitioned between 1N NaOH and DCM. The aqueous layer was extracted twice with DCM. The combined organic layers were concentrated in vacuo to give N-tert-butylfuran-2-carboxamide as a white solid. MS m/z=168 [M+H]+. Calc'd for C9H13NO2: 167.2. the clear solution was concentrated in vacuo the resulting oil was dissolved in 75 mL THF cooled to 0° C The reaction was concentrated in vacuo partitioned between 1N NaOH and DCM The aqueous layer was extracted twice with DCM The combined organic layers were concentrated in vacuo

Conditions: temp:0.00; pressure:0.00; stir:; See reaction.notes.procedure_details.

Procedure: To a stirring solution of N-tert-butylfuran-2-carboxamide (1.8 ml, 12 mmol) in 100 mL DME under argon at −78° C. was added tert-butyllithium, 1.7 M solution in pentane (14 ml, 24 mmol) slowly dropwise over 5 min. The heterogeneous reaction mixture was allowed to stir 1 h, at which point a solution of N-tert-butylfuran-2-carboxamide (1.8 ml, 12 mmol) in 10 mL DME was added over 5 min, dropwise. After 15 min, the bath was removed and the reaction was allowed to warm to ambient temperature. The reaction was quenched by addition of saturated aqueous ammonium chloride, water, and EtOAc. The organic layer was dried over anhydrous sodium sulfate, filtered, and concentrated in vacuo. The resulting material was purified by silica gel chromatography, ISCO, 80 g, 0-40% EtOAc/hexanes over 33 min to give a semi-solid. This material was triturated 3× hexanes to give 3-benzoyl-N-tert-butylfuran-2-carboxamide as white crystals. MS m/z=272 [M+H]+. Calc'd for C16H17NO3: 271.3. was added over 5 min the bath was removed The reaction was quenched by addition of saturated aqueous ammonium chloride, water, and EtOAc The organic layer was dried over anhydrous sodium sulfate filtered concentrated in vacuo The resulting material was purified by silica gel chromatography, ISCO, 80 g, 0-40% EtOAc/hexanes over 33 min to give a semi-solid This material was triturated 3× hexanes

Conditions: temp:0.00; pressure:0.00; stir:; See reaction.notes.procedure_details.

Procedure: To a slurry of furan-2-carboxylic acid (10.0 g, 89 mmol) in 100 mL DCM at 0° C. under nitrogen was added DMF (0.069 ml, 0.89 mmol) and oxalyl chloride (9.9 ml, 112 mmol) slowly in small portions over 5 min. The reaction was allowed to warm to ambient temperature. After 3 h, the clear solution was concentrated in vacuo and the resulting oil was dissolved in 75 mL THF and cooled to 0° C. A solution of tert-butylamine (28 ml, 268 mmol) in 25 mL THF was added dropwise over 1 h. The bath was allowed to expire and the slurry was stirred over the weekend. The reaction was concentrated in vacuo and partitioned between 1N NaOH and DCM. The aqueous layer was extracted twice with DCM. The combined organic layers were concentrated in vacuo to give N-tert-butylfuran-2-carboxamide as a white solid. MS m/z=168 [M+H]+. Calc'd for C9H13NO2: 167.2. the clear solution was concentrated in vacuo the resulting oil was dissolved in 75 mL THF cooled to 0° C The reaction was concentrated in vacuo partitioned between 1N NaOH and DCM The aqueous layer was extracted twice with DCM The combined organic layers were concentrated in vacuo

Conditions: temp:0.00; pressure:0.00; stir: