methyl 2-(2-bromo-4-fluorophenyl)acetate

Conditions: temp:0.00; pressure:0.00; stir:; See reaction.notes.procedure_details.

Procedure: Thionyl chloride (6 mL) was added dropwise to a solution of 2-bromo-4-fluorophenylacetic acid (5.0 g) in methanol (50 mL), and the reaction solution was stirred at room temperature for one hour. The reaction mixture was concentrated under reduced pressure, and then the residue was dissolved in ethyl acetate. The solution was filtered through a silica gel pad (carrier: Chromatorex NH), and the filtrate was concentrated under reduced pressure to obtain methyl 2-bromo-4-fluorophenylacetate (5.53 g). A solution of methyl 2-bromo-4-fluorophenylacetate (2.0 g) in DMF (5 mL) was added to a suspension of sodium hydride (containing mineral oil at 40%, 356 mg) in DMF (20 mL) under ice-cooling. The reaction solution was stirred for 10 minutes, further stirred at room temperature for 30 minutes and then ice-cooled again. A solution of 1-chloro-3-iodopropane (1.82 g) in DMF (5 mL) was added to the reaction mixture, and the reaction solution was stirred at room temperature for three hours. Water and ethyl acetate were added to the reaction mixture, and the organic layer was separated. The resulting organic layer was washed with saturated aqueous sodium chloride, dried over anhydrous magnesium sulfate and then concentrated under reduced pressure. Hydrazine monohydrate (8 mL) was added to a solution of the resulting crude purified methyl 5-chloro-2-(2-bromo-4-fluoro)phenylpentanoate (2.75 g) in ethanol (20 mL), and the reaction solution was heated under reflux for 3.5 hours. The reaction solution was left to cool to room temperature and then concentrated under reduced pressure. Saturated sodium bicarbonate water and ethyl acetate and were added to the residue, and the organic layer was separated. The resulting organic layer was washed with saturated aqueous sodium chloride, dried over anhydrous magnesium sulfate and then concentrated under reduced pressure. The resulting residue was purified by silica gel column chromatography (elution solvent: ethyl acetate-methanol system) to obtain 1.157 g of the title compound. The property values of the compound are as follows. The reaction mixture was concentrated under reduced pressure the residue was dissolved in ethyl acetate The solution was filtered through a silica gel pad (carrier: Chromatorex NH) the filtrate was concentrated under reduced pressure

Conditions: temp:0.00; pressure:0.00; stir:; See reaction.notes.procedure_details.

Procedure: Thionyl chloride (6 mL) was added dropwise to a solution of 2-bromo-4-fluorophenylacetic acid (5.0 g) in methanol (50 mL), and the reaction solution was stirred at room temperature for one hour. The reaction mixture was concentrated under reduced pressure, and then the residue was dissolved in ethyl acetate. The solution was filtered through a silica gel pad (carrier: Chromatorex NH), and the filtrate was concentrated under reduced pressure to obtain methyl 2-bromo-4-fluorophenylacetate (5.53 g). A solution of methyl 2-bromo-4-fluorophenylacetate (2.0 g) in DMF (5 mL) was added to a suspension of sodium hydride (containing mineral oil at 40%, 356 mg) in DMF (20 mL) under ice-cooling. The reaction solution was stirred for 10 minutes, further stirred at room temperature for 30 minutes and then ice-cooled again. A solution of 1-chloro-3-iodopropane (1.82 g) in DMF (5 mL) was added to the reaction mixture, and the reaction solution was stirred at room temperature for three hours. Water and ethyl acetate were added to the reaction mixture, and the organic layer was separated. The resulting organic layer was washed with saturated aqueous sodium chloride, dried over anhydrous magnesium sulfate and then concentrated under reduced pressure. Hydrazine monohydrate (8 mL) was added to a solution of the resulting crude purified methyl 5-chloro-2-(2-bromo-4-fluoro)phenylpentanoate (2.75 g) in ethanol (20 mL), and the reaction solution was heated under reflux for 3.5 hours. The reaction solution was left to cool to room temperature and then concentrated under reduced pressure. Saturated sodium bicarbonate water and ethyl acetate and were added to the residue, and the organic layer was separated. The resulting organic layer was washed with saturated aqueous sodium chloride, dried over anhydrous magnesium sulfate and then concentrated under reduced pressure. The resulting residue was purified by silica gel column chromatography (elution solvent: ethyl acetate-methanol system) to obtain 1.157 g of the title compound. The property values of the compound are as follows. The reaction mixture was concentrated under reduced pressure the residue was dissolved in ethyl acetate The solution was filtered through a silica gel pad (carrier: Chromatorex NH) the filtrate was concentrated under reduced pressure

Conditions: temp:0.00; pressure:0.00; stir:; See reaction.notes.procedure_details.

Procedure: Thionyl chloride (6 mL) was added dropwise to a solution of 2-bromo-4-fluorophenylacetic acid (5.0 g) in methanol (50 mL), and the reaction solution was stirred at room temperature for one hour. The reaction mixture was concentrated under reduced pressure, and then the residue was dissolved in ethyl acetate. The solution was filtered through a silica gel pad (carrier: Chromatorex NH), and the filtrate was concentrated under reduced pressure to obtain methyl 2-bromo-4-fluorophenylacetate (5.53 g). A solution of methyl 2-bromo-4-fluorophenylacetate (2.0 g) in DMF (5 mL) was added to a suspension of sodium hydride (containing mineral oil at 40%, 356 mg) in DMF (20 mL) under ice-cooling. The reaction solution was stirred for 10 minutes, further stirred at room temperature for 30 minutes and then ice-cooled again. A solution of 1-chloro-3-iodopropane (1.82 g) in DMF (5 mL) was added to the reaction mixture, and the reaction solution was stirred at room temperature for three hours. Water and ethyl acetate were added to the reaction mixture, and the organic layer was separated. The resulting organic layer washed with saturated aqueous sodium chloride, dried over anhydrous magnesium sulfate and then concentrated under reduced pressure. Hydrazine monohydrate (8 mL) was added to a solution of the resulting crude purified methyl 5-chloro-2-(2-bromo-4-fluoro)phenylpentanoate (2.75 g) in ethanol (20 mL), and the reaction solution was heated under reflux for 3.5 hours. The reaction solution was left to cool to room temperature and then concentrated under reduced pressure. Saturated sodium bicarbonate water and ethyl acetate and were added to the residue, and the organic layer was separated. The resulting organic layer was washed with saturated aqueous sodium chloride, dried over anhydrous magnesium sulfate and then concentrated under reduced pressure. The resulting residue was purified by silica gel column chromatography (elution solvent: ethyl acetate-methanol system) to obtain 1.157 g of the title compound. The property values of the compound are as follows. The reaction mixture was concentrated under reduced pressure the residue was dissolved in ethyl acetate The solution was filtered through a silica gel pad (carrier: Chromatorex NH) the filtrate was concentrated under reduced pressure

Conditions: temp:0.00; pressure:0.00; stir:; See reaction.notes.procedure_details.

Procedure: Thionyl chloride (6 mL) was added dropwise to a solution of 2-bromo-4-fluorophenylacetic acid (5.0 g) in methanol (50 mL), and the reaction solution was stirred at room temperature for one hour. The reaction mixture was concentrated under reduced pressure, and then the residue was dissolved in ethyl acetate. The solution was filtered through a silica gel pad (carrier: Chromatorex NH), and the filtrate was concentrated under reduced pressure to obtain methyl 2-bromo-4-fluorophenylacetate (5.53 g). A solution of methyl 2-bromo-4-fluorophenylacetate (2.0 g) in DMF (5 mL) was added to a suspension of sodium hydride (containing mineral oil at 40%, 356 mg) in DMF (20 mL) under ice-cooling. The reaction solution was stirred for 10 minutes, further stirred at room temperature for 30 minutes and then ice-cooled again. A solution of 1-chloro-3-iodopropane (1.82 g) in DMF (5 mL) was added to the reaction mixture, and the reaction solution was stirred at room temperature for three hours. Water and ethyl acetate were added to the reaction mixture, and the organic layer was separated. The resulting organic layer washed with saturated aqueous sodium chloride, dried over anhydrous magnesium sulfate and then concentrated under reduced pressure. Hydrazine monohydrate (8 mL) was added to a solution of the resulting crude purified methyl 5-chloro-2-(2-bromo-4-fluoro)phenylpentanoate (2.75 g) in ethanol (20 mL), and the reaction solution was heated under reflux for 3.5 hours. The reaction solution was left to cool to room temperature and then concentrated under reduced pressure. Saturated sodium bicarbonate water and ethyl acetate and were added to the residue, and the organic layer was separated. The resulting organic layer was washed with saturated aqueous sodium chloride, dried over anhydrous magnesium sulfate and then concentrated under reduced pressure. The resulting residue was purified by silica gel column chromatography (elution solvent: ethyl acetate-methanol system) to obtain 1.157 g of the title compound. The property values of the compound are as follows. The reaction mixture was concentrated under reduced pressure the residue was dissolved in ethyl acetate The solution was filtered through a silica gel pad (carrier: Chromatorex NH) the filtrate was concentrated under reduced pressure

Conditions: temp:0.00; pressure:0.00; stir:; See reaction.notes.procedure_details.

Procedure: Thionyl chloride (6 mL) was added dropwise to a solution of 2-bromo-4-fluorophenylacetic acid (5.0 g) in methanol (50 mL), and the reaction solution was stirred at room temperature for one hour. The reaction mixture was concentrated under reduced pressure, and then the residue was dissolved in ethyl acetate. The solution was filtered through a silica gel pad (carrier: Chromatorex NH), and the filtrate was concentrated under reduced pressure to obtain methyl 2-bromo-4-fluorophenylacetate (5.53 g). A solution of methyl 2-bromo-4-fluorophenylacetate (2.0 g) in DMF (5 mL) was added to a suspension of sodium hydride (containing mineral oil at 40%, 356 mg) in DMF (20 mL) under ice-cooling. The reaction solution was stirred for 10 minutes, further stirred at room temperature for 30 minutes and then ice-cooled again. A solution of 1-chloro-3-iodopropane (1.82 g) in DMF (5 mL) was added to the reaction mixture, and the reaction solution was stirred at room temperature for three hours. Water and ethyl acetate were added to the reaction mixture, and the organic layer was separated. The resulting organic layer washed with saturated aqueous sodium chloride, dried over anhydrous magnesium sulfate and then concentrated under reduced pressure. Hydrazine monohydrate (8 mL) was added to a solution of the resulting crude purified methyl 5-chloro-2-(2-bromo-4-fluoro)phenylpentanoate (2.75 g) in ethanol (20 mL), and the reaction solution was heated under reflux for 3.5 hours. The reaction solution was left to cool to room temperature and then concentrated under reduced pressure. Saturated sodium bicarbonate water and ethyl acetate and were added to the residue, and the organic layer was separated. The resulting organic layer was washed with saturated aqueous sodium chloride, dried over anhydrous magnesium sulfate and then concentrated under reduced pressure. The resulting residue was purified by silica gel column chromatography (elution solvent: ethyl acetate-methanol system) to obtain 1.157 g of the title compound. The property values of the compound are as follows. The reaction mixture was concentrated under reduced pressure the residue was dissolved in ethyl acetate The solution was filtered through a silica gel pad (carrier: Chromatorex NH) the filtrate was concentrated under reduced pressure

Conditions: temp:35.01; pressure:0.00; stir:; See reaction.notes.procedure_details.

Procedure: A suspension of (trimethylsilyl)acetylene (0.696 g, 7.08 mmol), methyl 2-(2-bromo-4-fluorophenyl)acetate (A48) (0.500 g, 2.02 mmol), PPh3 (0.053 g, 0.202 mmol), CuI (39 mg, 0.202 mmol), Et3N (1.41 mL, 10.1 mmol) and PdCl2(PPh3)2 (0.142 g, 0.202 mmol) in THF (25 mL) was heated at 35° C. for 16 hours. The resulting mixture was adsorbed onto silica gel and purified using column chromatography (Biotage Isolera, 40 g SiO2 cartridge, 0-40% EtOAc in petroleum benzine 40-60° C.) to yield the title compound A49 as a clear oil (0.212 g, 40%); LCMS-A: rt 6.830 min. purified column chromatography (Biotage Isolera, 40 g SiO2 cartridge, 0-40% EtOAc in petroleum benzine 40-60° C.)

Conditions: temp:0.00; pressure:0.00; stir:; See reaction.notes.procedure_details.

Procedure: Sulfuric acid (1.50 mL) was added cautiously to a solution of 2-bromo-4-fluorophenylacetic acid (1.00 g, 4.29 mmol) in MeOH (25 mL) and the resulting mixture stirred overnight at room temperature. Saturated aqueous Na2CO3 solution was added until the pH of the mixture was 14, then the aqueous layer was extracted with DCM (2×100 mL). The combined organics were dried over MgSO4 then the volatiles were removed in vacuo to yield the title compound A48 as a clear oil (1.00 g, 94%); 1H NMR (400 MHz, CDCl3) δ 7.34 (dd, J=8.2, 2.6 Hz, 1H), 7.29 (dd, J=8.5, 6.0 Hz, 1H), 7.03 (td, J=8.3, 2.6 Hz, 1H), 3.79 (s, 2H), 3.74 (s, 3H). LCMS-A: rt 5.911 min. the aqueous layer was extracted with DCM (2×100 mL) The combined organics were dried over MgSO4 the volatiles were removed in vacuo

Conditions: temp:0.00; pressure:0.00; stir:; See reaction.notes.procedure_details.

Procedure: Thionyl chloride (6 mL) was added dropwise to a solution of 2-bromo-4-fluorophenylacetic acid (5.0 g) in methanol (50 mL), and the reaction solution was stirred at room temperature for one hour. The reaction mixture was concentrated under reduced pressure, and then the residue was dissolved in ethyl acetate. The solution was filtered through a silica gel pad (carrier: Chromatorex NH), and the filtrate was concentrated under reduced pressure to obtain methyl 2-bromo-4-fluorophenylacetate (5.53 g). A solution of methyl 2-bromo-4-fluorophenylacetate (2.0 g) in DMF (5 mL) was added to a suspension of sodium hydride (containing mineral oil at 40%, 356 mg) in DMF (20 mL) under ice-cooling. The reaction solution was stirred for 10 minutes, further stirred at room temperature for 30 minutes and then ice-cooled again. A solution of 1-chloro-3-iodopropane (1.82 g) in DMF (5 mL) was added to the reaction mixture, and the reaction solution was stirred at room temperature for three hours. Water and ethyl acetate were added to the reaction mixture, and the organic layer was separated. The resulting organic layer was washed with saturated aqueous sodium chloride, dried over anhydrous magnesium sulfate and then concentrated under reduced pressure. Hydrazine monohydrate (8 mL) was added to a solution of the resulting crude purified methyl 5-chloro-2-(2-bromo-4-fluoro)phenylpentanoate (2.75 g) in ethanol (20 mL), and the reaction solution was heated under reflux for 3.5 hours. The reaction solution was left to cool to room temperature and then concentrated under reduced pressure. Saturated sodium bicarbonate water and ethyl acetate and were added to the residue, and the organic layer was separated. The resulting organic layer was washed with saturated aqueous sodium chloride, dried over anhydrous magnesium sulfate and then concentrated under reduced pressure. The resulting residue was purified by silica gel column chromatography (elution solvent: ethyl acetate-methanol system) to obtain 1.157 g of the title compound. The property values of the compound are as follows. The reaction mixture was concentrated under reduced pressure the residue was dissolved in ethyl acetate The solution was filtered through a silica gel pad (carrier: Chromatorex NH) the filtrate was concentrated under reduced pressure

Conditions: temp:0.00; pressure:0.00; stir:; See reaction.notes.procedure_details.

Procedure: Thionyl chloride (6 mL) was added dropwise to a solution of 2-bromo-4-fluorophenylacetic acid (5.0 g) in methanol (50 mL), and the reaction solution was stirred at room temperature for one hour. The reaction mixture was concentrated under reduced pressure, and then the residue was dissolved in ethyl acetate. The solution was filtered through a silica gel pad (carrier: Chromatorex NH), and the filtrate was concentrated under reduced pressure to obtain methyl 2-bromo-4-fluorophenylacetate (5.53 g). A solution of methyl 2-bromo-4-fluorophenylacetate (2.0 g) in DMF (5 mL) was added to a suspension of sodium hydride (containing mineral oil at 40%, 356 mg) in DMF (20 mL) under ice-cooling. The reaction solution was stirred for 10 minutes, further stirred at room temperature for 30 minutes and then ice-cooled again. A solution of 1-chloro-3-iodopropane (1.82 g) in DMF (5 mL) was added to the reaction mixture, and the reaction solution was stirred at room temperature for three hours. Water and ethyl acetate were added to the reaction mixture, and the organic layer was separated. The resulting organic layer was washed with saturated aqueous sodium chloride, dried over anhydrous magnesium sulfate and then concentrated under reduced pressure. Hydrazine monohydrate (8 mL) was added to a solution of the resulting crude purified methyl 5-chloro-2-(2-bromo-4-fluoro)phenylpentanoate (2.75 g) in ethanol (20 mL), and the reaction solution was heated under reflux for 3.5 hours. The reaction solution was left to cool to room temperature and then concentrated under reduced pressure. Saturated sodium bicarbonate water and ethyl acetate and were added to the residue, and the organic layer was separated. The resulting organic layer was washed with saturated aqueous sodium chloride, dried over anhydrous magnesium sulfate and then concentrated under reduced pressure. The resulting residue was purified by silica gel column chromatography (elution solvent: ethyl acetate-methanol system) to obtain 1.157 g of the title compound. The property values of the compound are as follows. The reaction mixture was concentrated under reduced pressure the residue was dissolved in ethyl acetate The solution was filtered through a silica gel pad (carrier: Chromatorex NH) the filtrate was concentrated under reduced pressure