N,N'-Dibutyl-N,N'-dimethyl-malondiamide

Conditions: temp:0.00; pressure:0.00; stir:; See reaction.notes.procedure_details.

Procedure: ##STR28## 0.1 mol of N,N'-dimethyl-N,N'-dibutyl-propane diamide obtained in example 3(a) dissolved in 400 ml of anhydrous tetrahydrofuran were introduced into a one liter reactor, scavenged by an argon flow. Cooling took place to -50° C. using an acetone bath and solid carbon dioxide and pouring took place of a solution of n-butyl lithium prepared from 0.1 mol of n-butyl lithium in 100 ml of anhydrous tetrahydrofuran. Under the same conditions was prepared a solution of ethoxy-2-ethyl bromide of formula BrCH2 --CH2 --O--C2H5 prepared from 0.1 mol of bromide and 100 ml of anhydrous tetrahydrofuran. With pouring at an end, the temperature was allowed to rise to ambient temperature, followed by refluxing the tetrahydrofuran for three hours. This was followed by cooling and hydrolysis with a water-ethanol mixture. The tetrahydrofuran was expelled and a precipitate formed, followed by taking up with methylene chloride. This was followed by washing with water, drying the organic layer, expelling the solvent before performing chromatography on a silica gel column using as the eluent a mixture of ethyl acetate and cyclohexane (80:20 by volume). A yellow liquid was recovered constituted by 2-ethoxyethyl-N,N'-dimethyl-N,N'-dibutyl-propane diamide. The product was characterized by mass spectrometry, magnetic resonance of the proton and potentiometry, the eld was 40%. were introduced into a one liter reactor Cooling to -50° C. With pouring at an end to rise to ambient temperature by cooling a precipitate formed by washing with water drying the organic layer a mixture of ethyl acetate and cyclohexane (80:20 by volume) A yellow liquid was recovered

Conditions: temp:0.00; pressure:0.00; stir:; See reaction.notes.procedure_details.

Procedure: Preparation of 2-hexyl-N-N'-dimethyl-N,N'-dibutyl-propane diamide of formula: ##STR27## 0.1 mol of N,N'-dimethyl-N,N'-dibutyl-propane diamide dissolved in 400 ml of tetrahydrofuran are introduced into a one liter reactor, scavenged by a nitrogen stream. Cooling takes place to -50° C. using an acetone bath and solid carbon dioxide and pouring takes place of a solution of n-butyl lithium prepared from 0.1 mol of n-butyl lithium in 100 ml of anhydrous tetrahydrofuran. Under the same conditions is poured a solution of hexyl iodide prepared from 0.1 mol of hexyl iodide and 100 ml of anhydrous tetrahydrofuran. When pouring is at an end, the temperature is allowed to rise to ambient temperature again, followed by refluxing the tetrahydrofuran for three hours. Cooling is allowed to take place, followed by hydrolysis with a water-ethanol mixture. The tetrahydrofuran is expelled and in this way a precipitate is formed. This is taken up with methylene chloride, followed by washing with water, drying the organic layer, expelling the solvent and then distillation. The boiling point is 145° to 148° C. under 0.4 mm of mercury and the product is a yellow liquid. Its characterization by nuclear magnetic resonance of the proton and by potentiometric dosage confirms that it corresponds to the above formula. are introduced into a one liter reactor Cooling to -50° C. When pouring to rise to ambient temperature Cooling is formed by washing with water drying the organic layer distillation

Conditions: temp:0.00; pressure:0.00; stir:; See reaction.notes.procedure_details.

Procedure: 0.1 mol of N,N'-dimethyl-N,N'-dibutyl-propane diamide dissolved in 400 ml of tetrahydrofuran are introduced into a one litre reactor, scavenged by a nitrogen stream. Cooling takes place to -50° C. using an acetone bath and solid carbon dioxide. Then pouring of a solution of n-butyl lithium prepared from 0.1 mol of n-butyl lithium in 100 ml of anhydrous tetrahydrofuran occurs. Under the same conditions a solution of hexyl iodide prepared from 0.1 mol of hexyl iodide and 100 ml of anhydrous tetrahydrofuran is poured. When pouring is at an end, the temperature is allowed to rise to ambient temperature again, followed by refluxing the tetrahydrofuran is for three hours. Cooling is allowed to take place, followed by hydrolysis with a water-ethanol mixture. The tetrahydrofuran is expelled and in this way a precipitate is formed. This is taken up with methylene chloride, followed by washing with water, drying the organic layer, expelling the solvent and distilling. The boiling point is 145° to 148° C. under 0.4 mm of mercury and the product is a yellow liquid. Its characterization by nuclear magnetic resonance of the proton and by potentiometric dosage confirms that it corresponds to the above formula. are introduced into a one litre reactor Cooling to -50° C. is poured When pouring to rise to ambient temperature Cooling is formed by washing with water drying the organic layer distilling

Conditions: temp:0.00; pressure:0.00; stir:; See reaction.notes.procedure_details.

Procedure: Into a 1 liter reactor, scavenged by an argon stream, is introduced 0.1 mole of N,N'-dimethyl-N,N'-dibutyl-propane diamide dissolved in 400 ml of tetrahydrofuran. Cooling takes place to -50° C. with the aid of an acetone and solid carbon dioxide bath and a N-butyl lithium solution prepared from 0.1 mole of N-butyl lithium is poured into 100 ml of anhydrous tetrahydrofuran. Under the same conditions, pouring takes place of a solution of tetradecyl iodide prepared from 0.1 mole of tetradecyl iodide and 100 ml of anhydrous tetrahydrofuran. When pouring is ended, the temperature is allowed to rise to ambient temperature, followed by refluxing the tetrahydrofuran for 3 hours. It is left to cool and then hydrolyzed with a water-ethanol mixture. The tetrahydrofuran is expelled and in this way a precipitate is formed. It is taken up with methylene chloride, washed with water, the organic layer is dried and then the solvent is expelled prior to distillation. Into a 1 liter reactor, scavenged by an argon stream Cooling to -50° C. Under the same conditions, pouring When pouring to rise to ambient temperature It is left to cool is formed washed with water the organic layer is dried to distillation

Conditions: temp:0.00; pressure:0.00; stir:; See reaction.notes.procedure_details.

Procedure: ##STR28## 0.1 mol of N,N'-dimethyl-N,N'-dibutyl-propane diamide obtained in example 3(a) dissolved in 400 ml of anhydrous tetrahydrofuran were introduced into a one liter reactor, scavenged by an argon flow. Cooling took place to -50° C. using an acetone bath and solid carbon dioxide and pouring took place of a solution of n-butyl lithium prepared from 0.1 mol of n-butyl lithium in 100 ml of anhydrous tetrahydrofuran. Under the same conditions was prepared a solution of ethoxy-2-ethyl bromide of formula BrCH2 --CH2 --O--C2H5 prepared from 0.1 mol of bromide and 100 ml of anhydrous tetrahydrofuran. With pouring at an end, the temperature was allowed to rise to ambient temperature, followed by refluxing the tetrahydrofuran for three hours. This was followed by cooling and hydrolysis with a water-ethanol mixture. The tetrahydrofuran was expelled and a precipitate formed, followed by taking up with methylene chloride. This was followed by washing with water, drying the organic layer, expelling the solvent before performing chromatography on a silica gel column using as the eluent a mixture of ethyl acetate and cyclohexane (80:20 by volume). A yellow liquid was recovered constituted by 2-ethoxyethyl-N,N'-dimethyl-N,N'-dibutyl-propane diamide. The product was characterized by mass spectrometry, magnetic resonance of the proton and potentiometry, the eld was 40%. were introduced into a one liter reactor Cooling to -50° C. With pouring at an end to rise to ambient temperature by cooling a precipitate formed by washing with water drying the organic layer a mixture of ethyl acetate and cyclohexane (80:20 by volume) A yellow liquid was recovered

Conditions: temp:0.00; pressure:0.00; stir:; See reaction.notes.procedure_details.

Procedure: Preparation of 2-hexyl-N-N'-dimethyl-N,N'-dibutyl-propane diamide of formula: ##STR27## 0.1 mol of N,N'-dimethyl-N,N'-dibutyl-propane diamide dissolved in 400 ml of tetrahydrofuran are introduced into a one liter reactor, scavenged by a nitrogen stream. Cooling takes place to -50° C. using an acetone bath and solid carbon dioxide and pouring takes place of a solution of n-butyl lithium prepared from 0.1 mol of n-butyl lithium in 100 ml of anhydrous tetrahydrofuran. Under the same conditions is poured a solution of hexyl iodide prepared from 0.1 mol of hexyl iodide and 100 ml of anhydrous tetrahydrofuran. When pouring is at an end, the temperature is allowed to rise to ambient temperature again, followed by refluxing the tetrahydrofuran for three hours. Cooling is allowed to take place, followed by hydrolysis with a water-ethanol mixture. The tetrahydrofuran is expelled and in this way a precipitate is formed. This is taken up with methylene chloride, followed by washing with water, drying the organic layer, expelling the solvent and then distillation. The boiling point is 145° to 148° C. under 0.4 mm of mercury and the product is a yellow liquid. Its characterization by nuclear magnetic resonance of the proton and by potentiometric dosage confirms that it corresponds to the above formula. are introduced into a one liter reactor Cooling to -50° C. When pouring to rise to ambient temperature Cooling is formed by washing with water drying the organic layer distillation