2-[2-[2-(2-prop-2-ynoxyethoxy)ethoxy]ethoxy]ethanol

Conditions: temp:0.00; pressure:0.00; stir:

Conditions: temp:0.00; pressure:0.00; stir:; See reaction.notes.procedure_details.

Procedure: Into a 500-mL round-bottom flask purged and maintained with an inert atmosphere of nitrogen, was placed a solution of benzyl 3-iodobenzoate (25.68 g, 66.19 mmol, 1.00 equiv) in tetrahydrofuran (300 mL), 2-(2-(2-(2-(prop-2-ynyloxy)ethoxy)ethoxy)ethoxy)ethanol (15.36 g, 66.21 mmol, 1.00 equiv), copper(I) iodide (1.26 g, 6.63 mmol, 0.10 equiv), Pd(PPh3)2Cl2 (4.65 g, 6.62 mmol, 0.10 equiv), triethylamine (13.4 g, 132.67 mmol, 2.00 equiv). The resulting solution was stirred for 3 h at room temperature. The resulting mixture was concentrated under vacuum. The residue was applied onto a silica gel column with petroleum ether/ethyl acetate (1:1). This resulted in 20 g (68%) of benzyl 3-(3-(2-(2-(2-(2-hydroxyethoxy)ethoxy)ethoxy)ethoxy)prop-1-ynyl)benzoate as a brown oil. Into a 500-mL round-bottom flask purged maintained with an inert atmosphere of nitrogen The resulting mixture was concentrated under vacuum This resulted in 20 g (68%) of benzyl 3-(3-(2-(2-(2-(2-hydroxyethoxy)ethoxy)ethoxy)ethoxy)prop-1-ynyl)benzoate as a brown oil

Conditions: temp:0.00; pressure:0.00; stir:; See reaction.notes.procedure_details.

Procedure: To a slurry of 2-(5-(diethylamino)-2-(3-iodobenzamido)phenyl)-N-(3-(trifluoromethyl)benzyl)isonicotinamide (385 mg, 0.57 mmol), 3,6,9,12-tetraoxapentadec-14-yn-1-ol (175 mg, 0.75 mmol), Et3N (3 mL) and THF (2 mL) was added bis(triphenylphosphine)palladium(II)dichloride (12 mg, 0.017 mmol) and CuI (10 mg, 0.053 mmol) and purged well with nitrogen. The reaction mixture was stirred for 13 hours, then concentrated under vacuum and combined with the crude product from another run (0.15 mmol scale). Purification by flash chromatography on silica gel eluting (1% to 5% MeOH in DCM) gave the title compound (349 mg). 1H NMR (400 MHz, CDCl3, ppm) δ□12.51 (s, 1H), 8.83 (d, J=5.3 Hz, 1H), 8.42 (d, J=9.0 Hz, 1H), 8.21 (s, 1H), 7.99 (t, J=1.6 Hz, 1H), 7.94 (d, J=8.0 Hz, 1H), 7.75-7.68 (m, 2H), 7.65 (s, 1H), 7.60 (d, J=7.3 Hz, 1H), 7.58-7.54 (m, 2H), 7.48 (t, J=7.6 Hz, 1H), 7.42 (t, J=7.9 Hz, 1H), 6.98 (d, J=2.6 Hz, 1H), 6.76 (d, J=8.8 Hz, 1H), 4.76 (d, J=5.9 Hz, 2H), 4.48 (s, 2H), 3.82-3.80 (m, 2H), 3.72-3.70 (m, 2H), 3.67-3.63 (m, 4H), 3.60 (s, 4H), 3.53-3.51 (m, 2H), 3.32 (quar, J=7.2 Hz, 4H), 2.90 (s, 1H), 1.13 (t, J=6.8 Hz, 6H). MS (ES, m/z): 777.4 [M+H]+. purged well with nitrogen concentrated under vacuum Purification by flash chromatography on silica gel eluting (1% to 5% MeOH in DCM)

Conditions: temp:0.00; pressure:0.00; stir:; See reaction.notes.procedure_details.

Procedure: To a suspension of sodium hydride (60% in oil, 740 mg, 18.5 mmol) in THF (50 mL) at 0° C. was added tetraethylene glycol (4.0 g, 20.6 mmol). After stirring for 15 minutes, propargyl bromide (80% in toluene, 2.00 mL, 18.0 mmol) was added slowly. The reaction was allowed to warm to RT and stirred 16 hours. Solids were removed by filtration and rinsed with MTBE (3×20 mL). The combined filtrates were concentrated and purified by flash chromatography on silica gel (EtOAc) to give 3,6,9,12-tetraoxapentadec-14-yn-1-ol (2.14 g). stirred 16 hours Solids were removed by filtration rinsed with MTBE (3×20 mL) The combined filtrates were concentrated purified by flash chromatography on silica gel (EtOAc)

Conditions: temp:0.00; pressure:0.00; stir:

Conditions: temp:0.00; pressure:0.00; stir:; See reaction.notes.procedure_details.

Procedure: To a slurry of 2-(5-(diethylamino)-2-(3-iodobenzamido)phenyl)-N-(3-(trifluoromethyl)benzyl)isonicotinamide (385 mg, 0.57 mmol), 3,6,9,12-tetraoxapentadec-14-yn-1-ol (175 mg, 0.75 mmol), Et3N (3 mL) and THF (2 mL) was added bis(triphenylphosphine)palladium(II)dichloride (12 mg, 0.017 mmol) and CuI (10 mg, 0.053 mmol) and purged well with nitrogen. The reaction mixture was stirred for 13 hours, then concentrated under vacuum and combined with the crude product from another run (0.15 mmol scale). Purification by flash chromatography on silica gel eluting (1% to 5% MeOH in DCM) gave the title compound (349 mg). 1H NMR (400 MHz, CDCl3, ppm) δ□ 12.51 (s, 1H), 8.83 (d, J=5.3 Hz, 1H), 8.42 (d, J=9.0 Hz, 1H), 8.21 (s, 1H), 7.99 (t, J=1.6 Hz, 1H), 7.94 (d, J=8.0 Hz, 1H), 7.75-7.68 (m, 2H), 7.65 (s, 1H), 7.60 (d, J=7.3 Hz, 1H), 7.58-7.54 (m, 2H), 7.48 (t, J=7.6 Hz, 1H), 7.42 (t, J=7.9 Hz, 1H), 6.98 (d, J=2.6 Hz, 1H), 6.76 (d, J=8.8 Hz, 1H), 4.76 (d, J=5.9 Hz, 2H), 4.48 (s, 2H), 3.82-3.80 (m, 2H), 3.72-3.70 (m, 2H), 3.67-3.63 (m, 4H), 3.60 (s, 4H), 3.53-3.51 (m, 2H), 3.32 (quar, J=7.2 Hz, 4H), 2.90 (s, 1H), 1.13 (t, J=6.8 Hz, 6H). MS (ES, m/z): 777.4 [M+H]+. purged well with nitrogen concentrated under vacuum Purification by flash chromatography on silica gel eluting (1% to 5% MeOH in DCM)

Conditions: temp:0.00; pressure:0.00; stir:; See reaction.notes.procedure_details.

Procedure: To a deoxygenated solution of iodopyrimidine 3 (494 mg, 1.12 mmol) and 2-(2-(2-(2-(prop-2-ynyloxy)ethoxy)ethoxy)ethoxy)ethanol (Veciani, et al., Ibid.) (780 mg, 3.36 mmol) in dry DMF (1.5 mL) and dry THF (3.0 mL) were added successively dry triethylamine (562.0 mg, 5.55 mmol, 0.80 mL), copper (1) iodide (105.7 mg, 0.56 mmol), and tetrakis(triphenylphosphine)palladium (0) (128.3 mg, 0.11 mmol). The reaction mixture was stirred at 25° C. under a nitrogen atmosphere for 3 hours after which TLC (DCM/methanol=3:97) revealed a more polar product and consumption of starting material 3. The mixture was poured into EDTA solution (20 mL, 5%) and the organic product extracted into EtOAc (3×50 mL). The combined organic extracts were washed with brine (20 mL), dried over Na2SO4 and the solvent evaporated in vacuo to furnish a residue that was subjected to silica-gel column chromatography using DCM/MeOH (95:5) as eluent to produce 4 as a light-brown oil (522.0 mg, 0.956 mmol, 85%). a more polar product and consumption of starting material 3 The mixture was poured into EDTA solution (20 mL, 5%) the organic product extracted into EtOAc (3×50 mL) The combined organic extracts were washed with brine (20 mL) dried over Na2SO4 the solvent evaporated in vacuo to furnish a residue that

Conditions: temp:0.00; pressure:0.00; stir:; See reaction.notes.procedure_details.

Procedure: Into a 500-mL round-bottom flask purged and maintained with an inert atmosphere of nitrogen, was placed a solution of benzyl 3-iodobenzoate (25.68 g, 66.19 mmol, 1.00 equiv) in tetrahydrofuran (300 mL), 2-(2-(2-(2-(prop-2-ynyloxy)ethoxy)ethoxy)ethoxy)ethanol (15.36 g, 66.21 mmol, 1.00 equiv), copper(I) iodide (1.26 g, 6.63 mmol, 0.10 equiv), Pd(PPh3)2Cl2 (4.65 g, 6.62 mmol, 0.10 equiv), triethylamine (13.4 g, 132.67 mmol, 2.00 equiv). The resulting solution was stirred for 3 h at room temperature. The resulting mixture was concentrated under vacuum. The residue was applied onto a silica gel column with petroleum ether/ethyl acetate (1:1). This resulted in 20 g (68%) of benzyl 3-(3-(2-(2-(2-(2-hydroxyethoxy)ethoxy)ethoxy)ethoxy)prop-1-ynyl)benzoate as a brown oil. Into a 500-mL round-bottom flask purged maintained with an inert atmosphere of nitrogen The resulting mixture was concentrated under vacuum This resulted in 20 g (68%) of benzyl 3-(3-(2-(2-(2-(2-hydroxyethoxy)ethoxy)ethoxy)ethoxy)prop-1-ynyl)benzoate as a brown oil

Conditions: temp:0.00; pressure:0.00; stir:; See reaction.notes.procedure_details.

Procedure: To a suspension of sodium hydride (60% in oil, 740 mg, 18.5 mmol) in THF (50 mL) at 0° C. was added tetraethylene glycol (4.0 g, 20.6 mmol). After stirring for 15 minutes, propargyl bromide (80% in toluene, 2.00 mL, 18.0 mmol) was added slowly. The reaction was allowed to warm to RT and stirred 16 hours. Solids were removed by filtration and rinsed with MTBE (3×20 mL). The combined filtrates were concentrated and purified by flash chromatography on silica gel (EtOAc) to give 3,6,9,12-tetraoxapentadec-14-yn-1-ol (2.14 g). stirred 16 hours Solids were removed by filtration rinsed with MTBE (3×20 mL) The combined filtrates were concentrated purified by flash chromatography on silica gel (EtOAc)

Conditions: temp:0.00; pressure:0.00; stir:; See reaction.notes.procedure_details.

Procedure: Into a 500-mL round-bottom flask purged and maintained with an inert atmosphere of nitrogen, was placed a solution of benzyl 3-iodobenzoate (25.68 g, 66.19 mmol, 1.00 equiv) in tetrahydrofuran (300 mL), 2-(2-(2-(2-(prop-2-ynyloxy)ethoxy)ethoxy)ethoxy)ethanol (15.36 g, 66.21 mmol, 1.00 equiv), copper(I) iodide (1.26 g, 6.63 mmol, 0.10 equiv), Pd(PPh3)2Cl2 (4.65 g, 6.62 mmol, 0.10 equiv), triethylamine (13.4 g, 132.67 mmol, 2.00 equiv). The resulting solution was stirred for 3 h at room temperature. The resulting mixture was concentrated under vacuum. The residue was applied onto a silica gel column with petroleum ether/ethyl acetate (1:1). This resulted in 20 g (68%) of benzyl 3-(3-(2-(2-(2-(2-hydroxyethoxy)ethoxy)ethoxy)ethoxy)prop-1-ynyl)benzoate as a brown oil. Into a 500-mL round-bottom flask purged maintained with an inert atmosphere of nitrogen The resulting mixture was concentrated under vacuum This resulted in 20 g (68%) of benzyl 3-(3-(2-(2-(2-(2-hydroxyethoxy)ethoxy)ethoxy)ethoxy)prop-1-ynyl)benzoate as a brown oil

Conditions: temp:0.00; pressure:0.00; stir:; See reaction.notes.procedure_details.

Procedure: To a slurry of 2-(5-(diethylamino)-2-(3-iodobenzamido)phenyl)-N-(3-(trifluoromethyl)benzyl)isonicotinamide (385 mg, 0.57 mmol), 3,6,9,12-tetraoxapentadec-14-yn-1-ol (175 mg, 0.75 mmol), Et3N (3 mL) and THF (2 mL) was added bis(triphenylphosphine)palladium(II)dichloride (12 mg, 0.017 mmol) and CuI (10 mg, 0.053 mmol) and purged well with nitrogen. The reaction mixture was stirred for 13 hours, then concentrated under vacuum and combined with the crude product from another run (0.15 mmol scale). Purification by flash chromatography on silica gel eluting (1% to 5% MeOH in DCM) gave the title compound (349 mg). 1H NMR (400 MHz, CDCl3, ppm) δ□12.51 (s, 1H), 8.83 (d, J=5.3 Hz, 1H), 8.42 (d, J=9.0 Hz, 1H), 8.21 (s, 1H), 7.99 (t, J=1.6 Hz, 1H), 7.94 (d, J=8.0 Hz, 1H), 7.75-7.68 (m, 2H), 7.65 (s, 1H), 7.60 (d, J=7.3 Hz, 1H), 7.58-7.54 (m, 2H), 7.48 (t, J=7.6 Hz, 1H), 7.42 (t, J=7.9 Hz, 1H), 6.98 (d, J=2.6 Hz, 1H), 6.76 (d, J=8.8 Hz, 1H), 4.76 (d, J=5.9 Hz, 2H), 4.48 (s, 2H), 3.82-3.80 (m, 2H), 3.72-3.70 (m, 2H), 3.67-3.63 (m, 4H), 3.60 (s, 4H), 3.53-3.51 (m, 2H), 3.32 (quar, J=7.2 Hz, 4H), 2.90 (s, 1H), 1.13 (t, J=6.8 Hz, 6H). MS (ES, m/z): 777.4 [M+H]+. purged well with nitrogen concentrated under vacuum Purification by flash chromatography on silica gel eluting (1% to 5% MeOH in DCM)

Conditions: temp:0.00; pressure:0.00; stir:; See reaction.notes.procedure_details.

Procedure: To a suspension of sodium hydride (60% in oil, 740 mg, 18.5 mmol) in THF (50 mL) at 0° C. was added tetraethylene glycol (4.0 g, 20.6 mmol). After stirring for 15 minutes, propargyl bromide (80% in toluene, 2.00 mL, 18.0 mmol) was added slowly. The reaction was allowed to warm to RT and stirred 16 hours. Solids were removed by filtration and rinsed with MTBE (3×20 mL). The combined filtrates were concentrated and purified by flash chromatography on silica gel (EtOAc) to give 3,6,9,12-tetraoxapentadec-14-yn-1-ol (2.14 g). stirred 16 hours Solids were removed by filtration rinsed with MTBE (3×20 mL) The combined filtrates were concentrated purified by flash chromatography on silica gel (EtOAc)