methyl 2-amino-6-fluorobenzoate

Conditions: temp:0.00; pressure:0.00; stir:

Conditions: temp:5.01; pressure:0.00; stir:; See reaction.notes.procedure_details.

Procedure: At 5° C. and while stirring, 108 g (0.64 mol) of methyl 6-fluoroanthranilate and 45 g (0.65 mol) of sodium nitrite in 106 ml of water were added separately but simultaneously over a period of 1 hour in such a manner to 250 ml of concentrated hydrochloric acid that the ester component was in an excess. After the reaction mixture had been stirred for 20 minutes at 5 to 8° C., it was poured all at once into a prepared solution of 53 g of sulfur dioxide, 1.7 g of copper (II) chloride in a small amount of water and 200 ml of 1,2-dichloroethane, and stirred for a further 10 minutes. The mixture was heated slowly to 50° C. and stirred for ninety minutes while passing in 46 g of sulfur dioxide. The mixture was then cooled to 20° C. and 5.5 g of chlorine was passed in over a 20-minute period while stirring. The organic phase was then separated, washed with water and dried. There was obtained 65% of theory of the title compound as a brownish oil. After the reaction mixture had been stirred for 20 minutes at 5 to 8° C. stirred for a further 10 minutes The mixture was heated slowly to 50° C. stirred for ninety minutes The mixture was then cooled to 20° C. was passed in over a 20-minute period while stirring The organic phase was then separated washed with water dried

Conditions: temp:50.01; pressure:0.00; stir:; See reaction.notes.procedure_details.

Procedure: 108 g of methyl 6-fluoroanthranilate and 45 g of sodium nitrite in 106 ml of water were added, via 2 feed devices, to 250 ml of stirred concentrated hydrochloric acid at 5° C. over the course of 1 hour in such a way that the ester component was present in excess. After the reaction mixture had been stirred for 20 minutes at 55° C.-8° C. it was poured, in one shot, into a previously prepared solution of 53 g of sulfur dioxide, 1.7 g of copper(II) chloride and a small amount of water in 200 ml of 1,2-dichloroethane, and the resulting mixture was stirred for 10 minutes thereafter. It was then slowly heated to 50° C. and stirred for 11/2 hours while introducing 46 g of sulfur dioxide. It was then cooled to 20° C. and 5.5 g of chlorine were introduced over 20 minutes, with stirring. Stirring was then continued for 20 minutes, after which the organic phase was separated off. It was washed with water, dried over magnesium sulfate and evaporated, giving 105 g of the compound shown in the title, in the form of a brownish oil. stirred for 11/2 hours It was then cooled to 20° C. with stirring Stirring was then continued for 20 minutes after which the organic phase was separated off It was washed with water dried over magnesium sulfate evaporated

Conditions: temp:50.01; pressure:0.00; stir:; See reaction.notes.procedure_details.

Procedure: 108 g of methyl 6-fluoroanthranilate and 45 g of sodium nitrite in 106 ml of water were added, via 2 feed devices, to 250 ml of stirred concentrated hydrochloric acid at 5° C. over the course of 1 hour in such a way that the ester component was present in excess. After the reaction mixture had been stirred for 20 minutes at 55° C.-8° C. it was poured, in one shot, into a previously prepared solution of 53 g of sulfur dioxide, 1.7 g of copper(II) chloride and a small amount of water in 200 ml of 1,2-dichloroethane, and the resulting mixture was stirred for 10 minutes thereafter. It was then slowly heated to 50° C. and stirred for 11/2 hours while introducing 46 g of sulfur dioxide. It was then cooled to 20° C. and 5.5 g of chlorine were introduced over 20 minutes, with stirring. Stirring was then continued for 20 minutes, after which the organic phase was separated off. It was washed with water, dried over magnesium sulfate and evaporated, giving 105 g of the compound shown in the title, in the form of a brownish oil. stirred for 11/2 hours It was then cooled to 20° C. with stirring Stirring was then continued for 20 minutes after which the organic phase was separated off It was washed with water dried over magnesium sulfate evaporated

Conditions: temp:0.00; pressure:0.00; stir:; See reaction.notes.procedure_details.

Procedure: Methyl 2-fluoro-6-nitrobenzoate (715 mg, 3.59 mmol) was dissolved in EtOH/HOAc/(10 mL/10 mL), followed by addition of iron powder (602 mg, 10.8 mmol) at room temperature. The resulting mixture was refluxed under N2 for 2 hrs. After cooling down to room temperature, the brown suspension was partitioned between H2O (30 mL) and Et2O (100 mL). After separation, the aqueous solution was extracted with Et2O (50 mL). The combined organic layers were washed with 1N NaOH (3×50 mL), brine (50 mL), dried on MgSO4, and concentrated on rotary vacuum to afford the expected product, methyl 2-amino-6-fluorobenzoate, an colorless oil which became wax-type solid on standing. The crude compound was pure enough to be used in next step without further purification; 1H NMR (400 MHz, CDCl3) δ ppm 3.89 (s, 3 H), 5.67 (s, 2 H), 6.34 (ddd, J=11.58, 8.06, 1.01 Hz, 1 H), 6.41 (d, J=8.31 Hz, 1 H), 7.13 (td, J=8.18, 5.79 Hz, 1 H); Mass spec. 170.06 (MH+), Calc. for C8H8FNO2 169.05. The resulting mixture was refluxed under N2 for 2 hrs the brown suspension was partitioned between H2O (30 mL) and Et2O (100 mL) After separation the aqueous solution was extracted with Et2O (50 mL) The combined organic layers were washed with 1N NaOH (3×50 mL), brine (50 mL) dried on MgSO4 concentrated on rotary vacuum

Conditions: temp:0.00; pressure:0.00; stir:; See reaction.notes.procedure_details.

Procedure: Methyl 2-fluoro-6-nitrobenzoate (715 mg, 3.59 mmol) was dissolved in EtOH/HOAc/(10 mL/10 mL), followed by addition of iron powder (602 mg, 10.8 mmol) at room temperature. The resulting mixture was refluxed under N2 for 2 hrs. After cooling down to room temperature, the brown suspension was partitioned between H2O (30 mL) and Et2O (100 mL). After separation, the aqueous solution was extracted with Et2O (50 mL). The combined organic layers were washed with 1N NaOH (3×50 mL), brine (50 mL), dried on MgSO4, and concentrated on rotary vacuum to afford the expected product, methyl 2-amino-6-fluorobenzoate, an colorless oil which became wax-type solid on standing. The crude compound was pure enough to be used in next step without further purification; 1H NMR (400 MHz, CDCl3) δ ppm 3.89 (s, 3 H), 5.67 (s, 2 H), 6.34 (ddd, J=11.58, 8.06, 1.01 Hz, 1 H), 6.41 (d, J=8.31 Hz, 1 H), 7.13 (td, J=8.18, 5.79 Hz, 1 H); Mass spec. 170.06 (MH+), Calc. for C8H8FNO2 169.05. The resulting mixture was refluxed under N2 for 2 hrs the brown suspension was partitioned between H2O (30 mL) and Et2O (100 mL) After separation the aqueous solution was extracted with Et2O (50 mL) The combined organic layers were washed with 1N NaOH (3×50 mL), brine (50 mL) dried on MgSO4 concentrated on rotary vacuum

Conditions: temp:0.00; pressure:0.00; stir:; See reaction.notes.procedure_details.

Procedure: Methyl 2-fluoro-6-nitrobenzoate (715 mg, 3.59 mmol) was dissolved in EtOH/HOAc/(10 mL/10 mL), followed by addition of iron powder (602 mg, 10.8 mmol) at room temperature. The resulting mixture was refluxed under N2 for 2 hrs. After cooling down to room temperature, the brown suspension was partitioned between H2O (30 mL) and Et2O (100 mL). After separation, the aqueous solution was extracted with Et2O (50 mL). The combined organic layers were washed with 1N NaOH (3×50 mL), brine (50 mL), dried on MgSO4, and concentrated on rotary vacuum to afford the expected product, methyl 2-amino-6-fluorobenzoate, an colorless oil which became wax-type solid on standing. The crude compound was pure enough to be used in next step without further purification; 1H NMR (400 MHz, CDCl3) δ ppm 3.89 (s, 3 H), 5.67 (s, 2 H), 6.34 (ddd, J=11.58, 8.06, 1.01 Hz, 1 H), 6.41 (d, J=8.31 Hz, 1 H), 7.13 (td, J=8.18, 5.79 Hz, 1 H); Mass spec. 170.06 (MH+), Calc. for C8H8FNO2 169.05. The resulting mixture was refluxed under N2 for 2 hrs the brown suspension was partitioned between H2O (30 mL) and Et2O (100 mL) After separation the aqueous solution was extracted with Et2O (50 mL) The combined organic layers were washed with 1N NaOH (3×50 mL), brine (50 mL) dried on MgSO4 concentrated on rotary vacuum

Conditions: temp:0.00; pressure:0.00; stir:; See reaction.notes.procedure_details.

Procedure: Methyl 2-fluoro-6-nitrobenzoate (715 mg, 3.59 mmol) was dissolved in EtOH/HOAc/(10 mL/10 mL), followed by addition of iron powder (602 mg, 10.8 mmol) at room temperature. The resulting mixture was refluxed under N2 for 2 hrs. After cooling down to room temperature, the brown suspension was partitioned between H2O (30 mL) and Et2O (100 mL). After separation, the aqueous solution was extracted with Et2O (50 mL). The combined organic layers were washed with 1N NaOH (3×50 mL), brine (50 mL), dried on MgSO4, and concentrated on rotary vacuum to afford the expected product, methyl 2-amino-6-fluorobenzoate, an colorless oil which became wax-type solid on standing. The crude compound was pure enough to be used in next step without further purification; 1H NMR (400 MHz, CDCl3) δ ppm 3.89 (s, 3 H), 5.67 (s, 2 H), 6.34 (ddd, J=11.58, 8.06, 1.01 Hz, 1 H), 6.41 (d, J=8.31 Hz, 1 H), 7.13 (td, J=8.18, 5.79 Hz, 1 H); Mass spec. 170.06 (MH+), Calc. for C8H8FNO2 169.05. The resulting mixture was refluxed under N2 for 2 hrs the brown suspension was partitioned between H2O (30 mL) and Et2O (100 mL) After separation the aqueous solution was extracted with Et2O (50 mL) The combined organic layers were washed with 1N NaOH (3×50 mL), brine (50 mL) dried on MgSO4 concentrated on rotary vacuum

Conditions: temp:0.00; pressure:0.00; stir:

Conditions: temp:0.00; pressure:0.00; stir:; See reaction.notes.procedure_details.

Procedure: Methyl 2-fluoro-6-nitrobenzoate (715 mg, 3.59 mmol) was dissolved in EtOH/HOAc/(10 mL/10 mL), followed by addition of iron powder(602 mg, 10.8 mmol) at room temperature. The resulting mixture was refluxed under N2 for 2 hrs. After cooling down to room temperature, the brown suspension was partitioned between H2O (30 mL) and Et2O (100 mL). After separation, the aqueous solution was extracted with Et2O (50 mL). The combined organic layers were washed with 1N NaOH (3×50 mL), brine (50 mL), dried on MgSO4, and concentrated on rotary vacuum to afford the expected product, methyl 2-amino-6-fluorobenzoate, an colorless oil which became wax-type solid on standing. The crude compound was pure enough to be used in next step without further purification; 1H NMR (400 MHz, CDCl3) δppm 3.89 (s, 3H), 5.67 (s, 2H), 6.34 (ddd, J=11.58, 8.06, 1.01 Hz, 1H), 6.41 (d, J=8.31 Hz, 1H), 7.13 (td, J=8.18, 5.79 Hz, 1H); Mass spec. 170.06 (MH+), Calc. for C8H8FNO2 169.05. The resulting mixture was refluxed under N2 for 2 hrs the brown suspension was partitioned between H2O (30 mL) and Et2O (100 mL) After separation the aqueous solution was extracted with Et2O (50 mL) The combined organic layers were washed with 1N NaOH (3×50 mL), brine (50 mL) dried on MgSO4 concentrated on rotary vacuum

Conditions: temp:5.01; pressure:0.00; stir:; See reaction.notes.procedure_details.

Procedure: At 5° C. and while stirring, 108 g (0.64 mol) of methyl 6-fluoroanthranilate and 45 g (0.65 mol) of sodium nitrite in 106 ml of water were added separately but simultaneously over a period of 1 hour in such a manner to 250 ml of concentrated hydrochloric acid that the ester component was in an excess. After the reaction mixture had been stirred for 20 minutes at 5° to 8° C., it was poured all at once into a prepared solution of 53 g of sulfur dioxide, 1.7 g of copper(II) chloride in a small amount of water and 200 ml of 1,2-dichloroethane, and stirred for a further 10 minutes. The mixture was heated slowly to 50° C. and stirred for ninety minutes while passing in 46 g of sulfur dioxide. The mixture was then cooled to 20° C. and 5.5 g of chlorine was passed in over a 20-minute period while stirring. The organic phase was then separated, washed with water and dried. There was obtained 65% of theory of the title compound as a brownish oil. After the reaction mixture had been stirred for 20 minutes at 5° to 8° C. stirred for a further 10 minutes The mixture was heated slowly to 50° C. stirred for ninety minutes The mixture was then cooled to 20° C. was passed in over a 20-minute period while stirring The organic phase was then separated washed with water dried

Conditions: temp:5.01; pressure:0.00; stir:; See reaction.notes.procedure_details.

Procedure: At 5° C. and while stirring, 108 g (0.64 mol) of methyl 6-fluoroanthranilate and 45 g (0.65 mol) of sodium nitrite in 106 ml of water were added separately but simultaneously over a period of 1 hour in such a manner to 250 ml of concentrated hydrochloric acid that the ester component was in an excess. After the reaction mixture had been stirred for 20 minutes at 5° to 8° C., it was poured all at once into a prepared solution of 53 g of sulfur dioxide, 1.7 g of copper(II) chloride in a small amount of water and 200 ml of 1,2-dichloroethane, and stirred for a further 10 minutes. The mixture was heated slowly to 50° C. and stirred for ninety minutes while passing in 46 g of sulfur dioxide. The mixture was then cooled to 20° C. and 5.5 g of chlorine was passed in over a 20-minute period while stirring. The organic phase was then separated, washed with water and dried. There was obtained 65% of theory of the title compound as a brownish oil. After the reaction mixture had been stirred for 20 minutes at 5° to 8° C. stirred for a further 10 minutes The mixture was heated slowly to 50° C. stirred for ninety minutes The mixture was then cooled to 20° C. was passed in over a 20-minute period while stirring The organic phase was then separated washed with water dried