(E)-4-(dimethylamino)but-2-enoyl chloride

Conditions: temp:0.00; pressure:0.00; stir:; See reaction.notes.procedure_details.

Procedure: Oxalyl chloride (155 mg, 1.2 mmol) was added dropwise to a mixture of 4-N,N-dimethyl aminocrotonic acid HCl salt (200 mg, 1.2 mmol) in 5 mL of THF at 0° C. To this mixture was added 3 drops of DMF/THF solution (made from 5 drops of DMF in 1 mL of THF). The reaction mixture was stirred at RT for 2 h, then was cooled to 0° C. ice bath. A solution of N′-(6-(3-chloro-4-fluorophenoxy)pyrimidin-4-yl)benzene-1,3-diamine (200 mg, 0.6 mmol) 2 mL of NMP) was added to the dimethylaminocrotonyl chloride solution and the resulting mixture was stirred for 3 h at 0° C. The reaction was quenched with 3 mL of 1N NaOH, and was extracted with EtOAc (2×25 mL). The crude product mixture was purified by flash chromatography on silica gel with MeOH/NH4OH/DCM solvent system to afford (E)-N-(3-(6-(3-chloro-4-fluorophenoxy)pyrimidin-4-ylamino)phenyl)-4-(dimethylamino)but-2-enamide (I-92) as a light colored solid. MS (m/z): MH+=442, 444(3:1), 1H-NMR (DMSO) δ 10.08 (s, 1H), 9.67 (s, 1H), 8.36 (s, 1H), 7.98 (s, 1H), 7.59 (d, 1H), 7.57 (t, 1H), 7.53-7.24 (m, 4H), 6.29 (b, 1H), 6.23 (s, 1H), 3.51 (d, 2H), 2.21 (s, 6H). was cooled to 0° C. ice bath the resulting mixture was stirred for 3 h at 0° C The reaction was quenched with 3 mL of 1N NaOH was extracted with EtOAc (2×25 mL) The crude product mixture was purified by flash chromatography on silica gel with MeOH/NH4OH/DCM solvent system

Conditions: temp:0.00; pressure:0.00; stir:; See reaction.notes.procedure_details.

Procedure: To a stirred solution of N2-(6-(4-phenoxyphenoxy)pyrimidin-4-yl)pyridine-2,6-diamine (0.65 g, 1.75 mmol) in NMP (10 mL) was added dimethylaminocrotonyl chloride (1.026 g, 7 mmol) at 0° C. The reaction mixture was allowed to come to room temperature and kept at it for 1 h. It was diluted with dichloromethane (10 mL), was washed with NaHCO3 solution (2 mL) and water (2 mL), and dried over Na2SO4. The dichloromethane solution was filtered and was concentrated under reduced pressure to give a residue that was purified by column chromatography (SiO2, 60-120, chloroform/methanol, 9/1) to give (E)-4-dimethylamino)-N-(6-(6-(4-phenoxyphenoxy)pyrimidin-4-ylamino)pyridin-2-yl)but-2-enamide (I-82) as an off white solid. 1H NMR (DMSO-d6) δ ppm: 2.19 (s, 6H), 3.08 (d, J=5.52 Hz, 2H), 6.50 (d, J=15.4 Hz, 1H), 6.77 (td, J=5.92 & 15.4 Hz, 1H), 7.00-7.07 (m, 5H), 7.15 (t, J=7.36 Hz, 1H), 7.21 (dd, J=2.2 & 8.92 Hz, 2H), 7.41 (t, J=7.52 Hz, 2H), 7.68 (t, J=7.96 Hz, 1H), 7.77 (d, J=7.96 Hz, 1H), 7.95 (s, 1H), 8.35 (s, 1H), 10.20 (s, 1H), 10.40 (s, 1H); LCMS: m/e 483 (M+1). to come to room temperature was washed with NaHCO3 solution (2 mL) and water (2 mL) dried over Na2SO4 The dichloromethane solution was filtered was concentrated under reduced pressure to give a residue that was purified by column chromatography (SiO2, 60-120, chloroform/methanol, 9/1)

Conditions: temp:0.01; pressure:0.00; stir:; See reaction.notes.procedure_details.

Procedure: A solution of dimethylaminocrotonyl chloride was prepared by reaction of dimethylaminocrotonic acid hydrochloride (0.36 g, 2.16 mmol) in CH3CN (4 mL) containing DMF (1 drop) with oxalyl chloride (0.34 g, 2.70 mmol) according to the procedure in Example 15a. This acid chloride was added drop wise at 0° C. in to a stirred solution of N4-(6-aminopyridin-2-yl)-N6-4-phenoxyphenylpyrimidine-4,6-diamine (IR-11) (0.2 g, 0.54 mmol) in NMP (8 mL). The reaction was stirred at 0° C. for 1 h, was diluted with EtOAc (5 mL), and was washed with 10% NaHCO3 (2 mL), water (2 mL) and brine (2 mL). Drying over Na2SO4 followed by concentration under reduced pressure offered a residue which was further purified by column chromatography (SiO2, 60-120, chloroform/methanol, 9/1) to give (E)-4-(dimethylamino)-N-(6-(6-(4-phenoxyphenylamino)pyrimidin-4-ylamino)pyridine-2-yl)but-2-enamide (I-64) as a yellow solid. 1H NMR (DMSO-d6) δ ppm: 2.18 (s, 6H), 3.05 (d, J=5.2 Hz, 2H), 6.48 (d, J=15.2 Hz, 1H), 6.79 (d, J=6 & 15.6 Hz, 1H), 6.96-6.99 (m, 4H), 7.07-7.15 (m, 2H), 7.36 (t, J=7.6 Hz, 2H), 7.42 (s, 1H), 7.64-7.7 (m, 4H), 8.30 (s, 1H), 9.12 (s, 1H), 9.69 (s, 1H), 10.07 (s, 1H); LCMS: m/e 482.4 (M+1). was washed with 10% NaHCO3 (2 mL), water (2 mL) and brine (2 mL) Drying over Na2SO4 followed by concentration under reduced pressure was further purified by column chromatography (SiO2, 60-120, chloroform/methanol, 9/1)

Conditions: temp:0.00; pressure:0.00; stir:; See reaction.notes.procedure_details.

Procedure: To a stirred solution of acetonitrile (20 mL) and DMF (0.05 mL) under N2 was added N,N-dimethylamino crotonic acid hydrochloride (0.47 g, 2.8 mmol). After 10 min this solution was cooled to 0-5° C. Oxalyl chloride (0.44 g, 3.5 mmol) was added and the reaction mixture was maintained at 0-5° C. for 30 min. It was allowed to warm to rt and stirring was continued for 2 h. It was then heated to 40° C. for 5 min and again brought to rt and stirred for 10 min to get a light greenish colored solution of dimethylaminocrotonyl chloride that was used as such for next step. To a stirred solution of N4-(6-aminopyridin-2-yl)-N6-phenylpyrimidine-4,6-diamine (0.2 g, 0.7 mmol) in NMP (10 mL) was added dropwise under N2 atmosphere at 0° C. the solution of dimethylaminocrotonyl chloride. The reaction mixture was maintained at this temperature for 30 min and was warmed to rt and stirred for 2 h. The mixture was quenched with sodium bicarbonate solution (1 mL) and was extracted with EtOAc (2×35 mL). The combined ethyl acetate extract was washed with water (20 mL) and brine (20 mL), was dried over Na2SO4 and was concentrated under reduced pressure. The residue was purified by column chromatography (SiO2, 60-120, product was eluted at 4-6% methanol in chloroform) to give (E)-4-(dimethylamino)-N-(6-(6-(phenylamino)pyrimidin-4-ylamino)pyridine-2-yl)but-2-enamide (I-73) as a yellowish solid. 1H NMR (DMSO-d6) δ ppm: 2.24 (s, 6H), 3.13 (d, J=5.76 Hz, 2H), 6.56 (d, J=15.52 Hz, 1H), 6.80 (d, J=15.36 Hz, 1H), 6.95 (t, J=7.36 Hz, 1H), 7.11 (t, J=1.16 Hz, 1H), 7.29 (t, J=7.56 Hz, 2H), 7.58 (s, 1H), 7.65-7.7 (m, 4H), 8.31 (d, J=2.44 Hz, 1H), 9.23 (s, 1H), 9.68 (s, 1H), 10.16 (s, 1H); LCMS: m/e 390.3 (M+1). The reaction mixture was maintained at this temperature for 30 min The mixture was quenched with sodium bicarbonate solution (1 mL) was extracted with EtOAc (2×35 mL) The combined ethyl acetate extract was washed with water (20 mL) and brine (20 mL) was dried over Na2SO4 was concentrated under reduced pressure The residue was purified by column chromatography (SiO2, 60-120, product was eluted at 4-6% methanol in chloroform)

Conditions: temp:2.51; pressure:0.00; stir:; See reaction.notes.procedure_details.

Procedure: To a stirred solution of acetonitrile (20 mL) and DMF (0.05 mL) under N2 was added N,N-dimethylamino crotonic acid hydrochloride (0.47 g, 2.8 mmol). After 10 min this solution was cooled to 0-5° C. Oxalyl chloride (0.44 g, 3.5 mmol) was added and the reaction mixture was maintained at 0-5° C. for 30 min. It was allowed to warm to rt and stirring was continued for 2 h. It was then heated to 40° C. for 5 min and again brought to rt and stirred for 10 min to get a light greenish colored solution of dimethylaminocrotonyl chloride that was used as such for next step. To a stirred solution of N4-(6-aminopyridin-2-yl)-N6-phenylpyrimidine-4,6-diamine (0.2 g, 0.7 mmol) in NMP (10 mL) was added dropwise under N2 atmosphere at 0° C. the solution of dimethylaminocrotonyl chloride. The reaction mixture was maintained at this temperature for 30 min and was warmed to rt and stirred for 2 h. The mixture was quenched with sodium bicarbonate solution (1 mL) and was extracted with EtOAc (2×35 mL). The combined ethyl acetate extract was washed with water (20 mL) and brine (20 mL), was dried over Na2SO4 and was concentrated under reduced pressure. The residue was purified by column chromatography (SiO2, 60-120, product was eluted at 4-6% methanol in chloroform) to give (E)-4-(dimethylamino)-N-(6-(6-(phenylamino)pyrimidin-4-ylamino)pyridine-2-yl)but-2-enamide (I-73) as a yellowish solid. 1H NMR (DMSO-d6) δ ppm: 2.24 (s, 6H), 3.13 (d, J=5.76 Hz, 2H), 6.56 (d, J=15.52 Hz, 1H), 6.80 (d, J=15.36 Hz, 1H), 6.95 (t, J=7.36 Hz, 1H), 7.11 (t, J=1.16 Hz, 1H), 7.29 (t, J=7.56 Hz, 2H), 7.58 (s, 1H), 7.65-7.7 (m, 4H), 8.31 (d, J=2.44 Hz, 1H), 9.23 (s, 1H), 9.68 (s, 1H), 10.16 (s, 1H); LCMS: m/e 390.3 (M+1). the reaction mixture was maintained at 0-5° C. for 30 min to warm to rt It was then heated to 40° C. for 5 min again brought to rt stirred for 10 min

Conditions: temp:0.00; pressure:0.00; stir:; See reaction.notes.procedure_details.

Procedure: Oxalyl chloride (155 mg, 1.2 mmol) was added dropwise to a mixture of 4-N,N-dimethyl aminocrotonic acid HCl salt (200 mg, 1.2 mmol) in 5 mL of THF at 0° C. To this mixture was added 3 drops of DMF/THF solution (made from 5 drops of DMF in 1 mL of THF). The reaction mixture was stirred at RT for 2 h, then was cooled to 0° C. ice bath. A solution of N1-(6-(3-chloro-4-fluorophenoxy)pyrimidin-4-yl)benzene-1,3-diamine (200 mg, 0.6 mmol) 2 mL of NMP) was added to the dimethylaminocrotonyl chloride solution and the resulting mixture was stirred for 3 h at 0° C. The reaction was quenched with 3 mL of 1N NaOH, and was extracted with EtOAc (2×25 mL). The crude product mixture was purified by flash chromatography on silica gel with MeOH/NH4OH/DCM solvent system to afford (E)-N-(3-(6-(3-chloro-4-fluorophenoxy)pyrimidin-4-ylamino)phenyl)-4-(dimethylamino)but-2-enamide (I-92) as a light colored solid. MS (m/z): MH+=442, 444 (3:1), H-NMR (DMSO) δ 10.08 (s, 1H), 9.67 (s, 1H), 8.36 (s, 1H), 7.98 (s, 1H), 7.59 (d, 1H), 7.57 (t, 1H), 7.53-7.24 (m, 4H), 6.29 (b, 1H), 6.23 (s, 1H), 3.51 (d, 2H), 2.21 (s, 6H). was cooled to 0° C. ice bath the resulting mixture was stirred for 3 h at 0° C The reaction was quenched with 3 mL of 1N NaOH was extracted with EtOAc (2×25 mL) The crude product mixture was purified by flash chromatography on silica gel with MeOH/NH4OH/DCM solvent system

Conditions: temp:0.00; pressure:0.00; stir:; See reaction.notes.procedure_details.

Procedure: To a stirred solution of N2-(6-(4-phenoxyphenoxy)pyrimidin-4-yl)pyridine-2,6-diamine (0.65 g, 1.75 mmol) in NMP (10 mL) was added dimethylaminocrotonyl chloride (1.026 g, 7 mmol) at 0° C. The reaction mixture was allowed to come to room temperature and kept at it for 1 h. It was diluted with dichloromethane (10 mL), was washed with NaHCO3 solution (2 mL) and water (2 mL), and dried over Na2SO4. The dichloromethane solution was filtered and was concentrated under reduced pressure to give a residue that was purified by column chromatography (SiO2, 60-120, chloroform/methanol, 9/1) to give (E)-4-dimethylamino)-N-(6-(6-(4-phenoxyphenoxy)pyrimidin-4-ylamino)pyridin-2-yl)but-2-enamide (I-82) as an off white solid. 1H NMR (DMSO-d6) δ ppm: 2.19 (s, 6H), 3.08 (d, J=5.52 Hz, 2H), 6.50 (d, J=15.4 Hz, 1H), 6.77 (td, J=5.92 & 15.4 Hz, 1H), 7.00-7.07 (m, 5H), 7.15 (t, J=7.36 Hz, 1H), 7.21 (dd, J=2.2 & 8.92 Hz, 2H), 7.41 (t, J=7.52 Hz, 2H), 7.68 (t, J=7.96 Hz, 1H), 7.77 (d, J=7.96 Hz, 1H), 7.95 (s, 1H), 8.35 (s, 1H), 10.20 (s, 1H), 10.40 (s, 1H); LCMS: m/e 483 (M+1). to come to room temperature was washed with NaHCO3 solution (2 mL) and water (2 mL) dried over Na2SO4 The dichloromethane solution was filtered was concentrated under reduced pressure to give a residue that was purified by column chromatography (SiO2, 60-120, chloroform/methanol, 9/1)

Conditions: temp:0.01; pressure:0.00; stir:; See reaction.notes.procedure_details.

Procedure: A solution of dimethylaminocrotonyl chloride was prepared by reaction of dimethylaminocrotonic acid hydrochloride (0.36 g, 2.16 mmol) in CH3CN (4 mL) containing DMF (1 drop) with oxalyl chloride (0.34 g, 2.70 mmol) according to the procedure in Example 15a. This acid chloride was added drop wise at 0° C. in to a stirred solution of N4-(6-aminopyridin-2-yl)-N6-4-phenoxyphenylpyrimidine-4,6-diamine (IR-11) (0.2 g, 0.54 mmol) in NMP (8 mL). The reaction was stirred at 0° C. for 1 h, was diluted with EtOAc (5 mL), and was washed with 10% NaHCO3 (2 mL), water (2 mL) and brine (2 mL). Drying over Na2SO4 followed by concentration under reduced pressure offered a residue which was further purified by column chromatography (SiO2, 60-120, chloroform/methanol, 9/1) to give (E)-4-(dimethylamino)-N-(6-(6-(4-phenoxyphenylamino)pyrimidin-4-ylamino)pyridine-2-yl)but-2-enamide (I-64) as a yellow solid. 1H NMR (DMSO-d6) δ ppm: 2.18 (s, 6H), 3.05 (d, J=5.2 Hz, 2H), 6.48 (d, J=15.2 Hz, 1H), 6.79 (d, J=6 & 15.6 Hz, 1H), 6.96-6.99 (m, 4H), 7.07-7.15 (m, 2H), 7.36 (t, J=7.6 Hz, 2H), 7.42 (s, 1H), 7.64-7.7 (m, 4H), 8.30 (s, 1H), 9.12 (s, 1H), 9.69 (s, 1H), 10.07 (s, 1H); LCMS: m/e 482.4 (M+1). was washed with 10% NaHCO3 (2 mL), water (2 mL) and brine (2 mL) Drying over Na2SO4 followed by concentration under reduced pressure was further purified by column chromatography (SiO2, 60-120, chloroform/methanol, 9/1)

Conditions: temp:0.00; pressure:0.00; stir:; See reaction.notes.procedure_details.

Procedure: To a stirred solution of acetonitrile (20 mL) and DMF (0.05 mL) under N2 was added N,N-dimethylamino crotonic acid hydrochloride (0.47 g, 2.8 mmol). After 10 min this solution was cooled to 0-5° C. Oxalyl chloride (0.44 g, 3.5 mmol) was added and the reaction mixture was maintained at 0-5° C. for 30 min. It was allowed to warm to rt and stirring was continued for 2 h. It was then heated to 40° C. for 5 min and again brought to rt and stirred for 10 min to get a light greenish colored solution of dimethylaminocrotonyl chloride that was used as such for next step. To a stirred solution of N4-(6-aminopyridin-2-yl)-N6-phenylpyrimidine-4,6-diamine (0.2 g, 0.7 mmol) in NMP (10 mL) was added dropwise under N2 atmosphere at 0° C. the solution of dimethylaminocrotonyl chloride. The reaction mixture was maintained at this temperature for 30 min and was warmed to rt and stirred for 2 h. The mixture was quenched with sodium bicarbonate solution (1 mL) and was extracted with EtOAc (2×35 mL). The combined ethyl acetate extract was washed with water (20 mL) and brine (20 mL), was dried over Na2SO4 and was concentrated under reduced pressure. The residue was purified by column chromatography (SiO2, 60-120, product was eluted at 4-6% methanol in chloroform) to give (E)-4-(dimethylamino)-N-(6-(6-(phenylamino)pyrimidin-4-ylamino)pyridine-2-yl)but-2-enamide (I-73) as a yellowish solid. 1H NMR (DMSO-d6) δ ppm: 2.24 (s, 6H), 3.13 (d, J=5.76 Hz, 2H), 6.56 (d, J=15.52 Hz, 1H), 6.80 (d, J=15.36 Hz, 1H), 6.95 (t, J=7.36 Hz, 1H), 7.11 (t, J=1.16 Hz, 1H), 7.29 (t, J=7.56 Hz, 2H), 7.58 (s, 1H), 7.65-7.7 (m, 4H), 8.31 (d, J=2.44 Hz, 1H), 9.23 (s, 1H), 9.68 (s, 1H), 10.16 (s, 1H); LCMS: m/e 390.3 (M+1). The reaction mixture was maintained at this temperature for 30 min The mixture was quenched with sodium bicarbonate solution (1 mL) was extracted with EtOAc (2×35 mL) The combined ethyl acetate extract was washed with water (20 mL) and brine (20 mL) was dried over Na2SO4 was concentrated under reduced pressure The residue was purified by column chromatography (SiO2, 60-120, product was eluted at 4-6% methanol in chloroform)

Conditions: temp:2.51; pressure:0.00; stir:; See reaction.notes.procedure_details.

Procedure: To a stirred solution of acetonitrile (20 mL) and DMF (0.05 mL) under N2 was added N,N-dimethylamino crotonic acid hydrochloride (0.47 g, 2.8 mmol). After 10 min this solution was cooled to 0-5° C. Oxalyl chloride (0.44 g, 3.5 mmol) was added and the reaction mixture was maintained at 0-5° C. for 30 min. It was allowed to warm to rt and stirring was continued for 2 h. It was then heated to 40° C. for 5 min and again brought to rt and stirred for 10 min to get a light greenish colored solution of dimethylaminocrotonyl chloride that was used as such for next step. To a stirred solution of N4-(6-aminopyridin-2-yl)-N6-phenylpyrimidine-4,6-diamine (0.2 g, 0.7 mmol) in NMP (10 mL) was added dropwise under N2 atmosphere at 0° C. the solution of dimethylaminocrotonyl chloride. The reaction mixture was maintained at this temperature for 30 min and was warmed to rt and stirred for 2 h. The mixture was quenched with sodium bicarbonate solution (1 mL) and was extracted with EtOAc (2×35 mL). The combined ethyl acetate extract was washed with water (20 mL) and brine (20 mL), was dried over Na2SO4 and was concentrated under reduced pressure. The residue was purified by column chromatography (SiO2, 60-120, product was eluted at 4-6% methanol in chloroform) to give (E)-4-(dimethylamino)-N-(6-(6-(phenylamino)pyrimidin-4-ylamino)pyridine-2-yl)but-2-enamide (I-73) as a yellowish solid. 1H NMR (DMSO-d6) δ ppm: 2.24 (s, 6H), 3.13 (d, J=5.76 Hz, 2H), 6.56 (d, J=15.52 Hz, 1H), 6.80 (d, J=15.36 Hz, 1H), 6.95 (t, J=7.36 Hz, 1H), 7.11 (t, J=1.16 Hz, 1H), 7.29 (t, J=7.56 Hz, 2H), 7.58 (s, 1H), 7.65-7.7 (m, 4H), 8.31 (d, J=2.44 Hz, 1H), 9.23 (s, 1H), 9.68 (s, 1H), 10.16 (s, 1H); LCMS: m/e 390.3 (M+1). the reaction mixture was maintained at 0-5° C. for 30 min to warm to rt It was then heated to 40° C. for 5 min again brought to rt stirred for 10 min

Conditions: temp:0.00; pressure:0.00; stir:; See reaction.notes.procedure_details.

Procedure: Oxalyl chloride (155 mg, 1.2 mmol) was added dropwise to a mixture of 4-N, N-dimethyl aminocrotonic acid HCl salt (200 mg, 1.2 mmol) in 5 mL of THF at 0° C. To this mixture was added 3 drops of DMF/THF solution (made from 5 drops of DMF in 1 mL of THF). The reaction mixture was stirred at RT for 2 h, then was cooled to 0° C. ice bath. A solution of N1-(6-(3-chloro-4-fluorophenoxy)pyrimidin-4-yl)benzene-1,3-diamine (200 mg, 0.6 mmol) 2 mL of NMP) was added to the dimethylaminocrotonyl chloride solution and the resulting mixture was stirred for 3 h at 0° C. The reaction was quenched with 3 mL of 1N NaOH, and was extracted with EtOAc (2×25 mL). The crude product mixture was purified by flash chromatography on silica gel with MeOH/NH4OH/DCM solvent system to afford (E)-N-(3-(6-(3-chloro-4-fluorophenoxy)pyrimidin-4-ylamino)phenyl)-4-(dimethylamino)but-2-enamide (I-92) as a light colored solid. MS (m/z): MH+=442, 444 (3:1), H-NMR (DMSO) δ 10.08 (s, 1H), 9.67 (s, 1H), 8.36 (s, 1H), 7.98 (s, 1H), 7.59 (d, 1H), 7.57 (t, 1H), 7.53-7.24 (m, 4H), 6.29 (b, 1H), 6.23 (s, 1H), 3.51 (d, 2H), 2.21 (s, 6H). was cooled to 0° C. ice bath the resulting mixture was stirred for 3 h at 0° C The reaction was quenched with 3 mL of 1N NaOH was extracted with EtOAc (2×25 mL) The crude product mixture was purified by flash chromatography on silica gel with MeOH/NH4OH/DCM solvent system

Conditions: temp:0.00; pressure:0.00; stir:; See reaction.notes.procedure_details.

Procedure: To a stirred solution of N2-(6-(4-phenoxyphenoxy)pyrimidin-4-yl)pyridine-2,6-diamine (0.65 g, 1.75 mmol) in NMP (10 mL) was added dimethylaminocrotonyl chloride (1.026 g, 7 mmol) at 0° C. The reaction mixture was allowed to come to room temperature and kept at it for 1 h. It was diluted with dichloromethane (10 mL), was washed with NaHCO3 solution (2 mL) and water (2 mL), and dried over Na2SO4. The dichloromethane solution was filtered and was concentrated under reduced pressure to give a residue that was purified by column chromatography (SiO2, 60-120, chloroform/methanol, 9/1) to give (E)-4-dimethylamino)-N-(6-(6-(4-phenoxyphenoxy)pyrimidin-4-ylamino)pyridin-2-yl)but-2-enamide (I-82) as an off white solid. 1H NMR (DMSO-d6) δ ppm: 2.19 (s, 6H), 3.08 (d, J=5.52 Hz, 2H), 6.50 (d, J=15.4 Hz, 1H), 6.77 (td, J=5.92 & 15.4 Hz, 1H), 7.00-7.07 (m, 5H), 7.15 (t, J=7.36 Hz, 1H), 7.21 (dd, J=2.2 & 8.92 Hz, 2H), 7.41 (t, J=7.52 Hz, 2H), 7.68 (t, J=7.96 Hz, 1H), 7.77 (d, J=7.96 Hz, 1H), 7.95 (s, 1H), 8.35 (s, 1H), 10.20 (s, 1H), 10.40 (s, 1H); LCMS: m/e 483 (M+1). to come to room temperature was washed with NaHCO3 solution (2 mL) and water (2 mL) dried over Na2SO4 The dichloromethane solution was filtered was concentrated under reduced pressure to give a residue that was purified by column chromatography (SiO2, 60-120, chloroform/methanol, 9/1)