diethyl 2,2,14,14-tetramethyl-8-(oxan-2-yloxy)pentadecanedioate

Conditions: temp:0.00; pressure:0.00; stir:; See reaction.notes.procedure_details.

Procedure: Under nitrogen atmosphere, LiAlH4 (2.2 g, 58 mmol) was suspended in anhydrous MTBE (250 mL) and cooled with an ice/water bath. 2,2,14,14-Tetramethyl-8-(tetrahydropyran-2-yloxy)-pentadecanedioic acid diethyl ester (12.0 g, 24.7 mmol) in anhydrous MTBE (100 mL) was added dropwise over 1.5 h. This mixture was left overnight at ambient temperature. After the reaction was completed, deionized water (4 mL) was added followed by 20% aqueous NaOH solution (5 mL) and water (14 mL). The ether solution was decanted from the formed white residue. The residue was washed with MTBE (4×20 mL) and the combined ether solutions were dried over MgSO4. The solvent was removed under reduced pressure to give crude 2,2,14,14-tetramethyl-8-(tetrahydropyran-2-yloxy)-pentadecane-1,15-diol as a colorless oil (8.9 g, 90%), which was used without further purification. 1H NMR (300 MHz, CDCl3/TMS): δ (ppm): 4.72-4.59 (m, 1H), 4.03-3.84 (m, 1H), 3.69-3.38 (m, 2H), 3.31 (s, 4H), 2.00-1.15 (m, 28H), 0.87 (s, 12H). 13C NMR (75 MHz, CDCl3/TMS): δ (ppm): 97.38, 76.57, 71.83, 62.65, 38.55, 34.96, 34.84, 33.33, 31.17, 30.75, 30.63, 26.92, 25.52, 24.95, 23.84, 23.70, 19.96. HRMS (EI, POS): Calcd for C24H48O4 (M+): 400.3553. found: 400.3564. cooled with an ice/water bath The ether solution was decanted from the formed white residue The residue was washed with MTBE (4×20 mL) the combined ether solutions were dried over MgSO4 The solvent was removed under reduced pressure

Conditions: temp:0.00; pressure:0.00; stir:; See reaction.notes.procedure_details.

Procedure: Under nitrogen atmosphere, LiAlH4 (2.2 g, 58 mmol) was suspended in anhydrous MTBE (250 mL) and cooled with an ice/water bath. 2,2,14,14-Tetramethyl-8-(tetrahydropyran-2-yloxy)-pentadecanedioic acid diethyl ester (12.0 g, 24.7 mmol) in anhydrous MTBE (100 mL) was added dropwise over 1.5 h. This mixture was left overnight at ambient temperature. After the reaction was completed, deionized water (4 mL) was added followed by 20% aqueous NaOH solution (5 mL) and water (14 mL). The ether solution was decanted from the formed white residue. The residue was washed with MTBE (4×20 mL) and the combined ether solutions were dried over MgSO4. The solvent was removed under reduced pressure to give crude 2,2,14,14-tetramethyl-8-(tetrahydropyran-2-yloxy)-pentadecane-1,15-diol as a colorless oil (8.9 g, 90%), which was used without further purification. 1H NMR (300 MHz, CDCl3/TMS): δ (ppm): 4.72-4.59 (m, 1H), 4.03-3.84 (m, 1H), 3.69-3.38 (m, 2H), 3.31 (s, 4H), 2.00-1.15 (m, 28H), 0.87 (s, 12H). 13C NMR (75 MHz, CDCl3/TMS): δ (ppm): 97.38, 76.57, 71.83, 62.65, 38.55, 34.96, 34.84, 33.33, 31.17, 30.75, 30.63, 26.92, 25.52, 24.95, 23.84, 23.70, 19.96. HRMS (EI, POS): Calcd for C24H48O4 (M+): 400.3553. found: 400.3564. cooled with an ice/water bath The ether solution was decanted from the formed white residue The residue was washed with MTBE (4×20 mL) the combined ether solutions were dried over MgSO4 The solvent was removed under reduced pressure

Conditions: temp:0.00; pressure:0.00; stir:; See reaction.notes.procedure_details.

Procedure: Under nitrogen atmosphere, 3,4-dihydro-2H-pyran (10.2 g, 121 mmol) was added dropwise to a stirred solution of 8-hydroxy-2,2,14,14-tetramethypentadecanedioic acid diethyl ester (16.1 g, 40 mmol) and p-toluenesulfonic acid monohydrate (catalytic amounts) in methylene chloride (100 mL) under cooling with an ice bath. The reaction mixture was allowed to warm to room temperature and stirred overnight. After the reaction was completed (TLC), the solution was filtered through basic aluminum oxide (50 g), which was washed with methylene chloride (4×30 mL). The filtrate was concentrated in vacuo to give crude product (19.5 g), which was purified by chromatography (silica gel, 200 g, heptanes/ethyl acetate=20:1, 10:1) yielding 2,2,14,14-tetramethyl-8-(tetrahydropyran-2-yloxy)-pentadecanedioic acid diethyl ester as a colorless oil (12.1 g, 62%). 1H NMR (300 MHz, CDCl3/TMS): δ (ppm): 4.69-4.59 (m, 1H), 4.11 (q, J=7.3 Hz, 4H), 3.98-3.82 (m, 1H), 3.65-3.40 (m, 2H), 2.00-1.18 (m, 26H), 1.24 (t, J=7.1 Hz, 6H), 1.15 (s, 12H). 13C NMR (75 MHz, CDCl3/TMS): δ (ppm): 177.74, 97.36, 76.48, 62.61, 60.02, 42.05, 40.70, 40.63, 34.90, 33.38, 31.16, 30.32, 30.26, 25.48, 25.10, 24.86, 19.96, 14.23. under cooling with an ice bath the solution was filtered through basic aluminum oxide (50 g), which was washed with methylene chloride (4×30 mL) The filtrate was concentrated in vacuo to give crude product (19.5 g), which was purified by chromatography (silica gel, 200 g, heptanes/ethyl acetate=20:1, 10:1)

Conditions: temp:0.00; pressure:0.00; stir:; See reaction.notes.procedure_details.

Procedure: Under nitrogen atmosphere, LiAlH4 (2.2 g, 58 mmol) was suspended in anhydrous MTBE (250 mL) and cooled with an ice/water bath. 2,2,14,14-Tetramethyl-8-(tetrahydropyran-2-yloxy)-pentadecanedioic acid diethyl ester (12.0 g, 24.7 mmol) in anhydrous MTBE (100 mL) was added dropwise over 1.5 h. This mixture was left overnight at ambient temperature. After the reaction was completed, deionized water (4 mL) was added followed by 20% aqueous NaOH solution (5 mL) and water (14 mL). The ether solution was decanted from the formed white residue. The residue was washed with MTBE (4×20 mL) and the combined ether solutions were dried over MgSO4. The solvent was removed under reduced pressure to give crude 2,2,14,14-tetramethyl-8-(tetrahydropyran-2-yloxy)-pentadecane-1,15-diol as a colorless oil (8.9 g, 90%), which was used without further purification. 1H NMR (300 MHz, CDCl3/TMS): δ (ppm): 4.72-4.59 (m, 1H), 4.03-3.84 (m, 1H), 3.69-3.38 (m, 2H), 3.31 (s, 4H), 2.00-1.15 (m, 28H), 0.87 (s, 12H). 13C NMR (75 MHz, CDCl3/TMS): δ (ppm): 97.38, 76.57, 71.83, 62.65, 38.55, 34.96, 34.84, 33.33, 31.17, 30.75, 30.63, 26.92, 25.52, 24.95, 23.84, 23.70, 19.96. HRMS (EL, POS): Calcd for C24H48O4 (M+): 400.3553, found: 400.3564. cooled with an ice/water bath The ether solution was decanted from the formed white residue The residue was washed with MTBE (4×20 mL) the combined ether solutions were dried over MgSO4 The solvent was removed under reduced pressure

Conditions: temp:0.00; pressure:0.00; stir:; See reaction.notes.procedure_details.

Procedure: Under nitrogen atmosphere, 3,4-dihydro-2H-pyran (10.2 g, 121 mmol) was added dropwise to a stirred solution of 8-hydroxy-2,2,14,14-tetramethypentadecanedioic acid diethyl ester (16.1 g, 40 mmol) and p-toluenesulfonic acid monohydrate (catalytic amounts) in methylene chloride (100 mL) under cooling with an ice bath. The reaction mixture was allowed to warm to room temperature and stirred overnight. After the reaction was completed (TLC), the solution was filtered through basic aluminum oxide (50 g), which was washed with methylene chloride (4×30 mL). The filtrate was concentrated in vacuo to give crude product (19.5 g), which was purified by chromatography (silica gel, 200 g, heptanes/ethyl acetate=20:1, 10:1) yielding 2,2,14,14-tetramethyl-8-(tetrahydropyran-2-yloxy)-pentadecanedioic acid diethyl ester as a colorless oil (12.1 g, 62%). 1H NMR (300 MHz, CDCl3/TMS): δ (ppm): 4.69-4.59 (m, 1H), 4.11 (q, J=7.3 Hz, 4H), 3.98-3.82 (m, 1H), 3.65-3.40 (m, 2H), 2.00-1.18 (m, 26H), 1.24 (t, J=7.1 Hz, 6H), 1.15 (s, 12H). 13C NMR (75 MHz, CDCl3/TMS): δ (ppm): 177.74, 97.36, 76.48, 62.61, 60.02, 42.05, 40.70, 40.63, 34.90, 33.38, 31.16, 30.32, 30.26, 25.48, 25.10, 24.86, 19.96, 14.23. under cooling with an ice bath the solution was filtered through basic aluminum oxide (50 g), which was washed with methylene chloride (4×30 mL) The filtrate was concentrated in vacuo to give crude product (19.5 g), which was purified by chromatography (silica gel, 200 g, heptanes/ethyl acetate=20:1, 10:1)

Conditions: temp:0.00; pressure:0.00; stir:; See reaction.notes.procedure_details.

Procedure: Under nitrogen atmosphere, LiAlH4 (2.2 g, 58 mmol) was suspended in anhydrous MTBE (250 mL) and cooled with an ice/water bath. 2,2,14,14-Tetramethyl-8-(tetrahydropyran-2-yloxy)-pentadecanedioic acid diethyl ester (12.0 g, 24.7 mmol) in anhydrous MTBE (100 mL) was added dropwise over 1.5 h. This mixture was left overnight at ambient temperature. After the reaction was completed, deionized water (4 mL) was added followed by 20% aqueous NaOH solution (5 mL) and water (14 mL). The ether solution was decanted from the formed white residue. The residue was washed with MTBE (4×20 mL) and the combined ether solutions were dried over MgSO4. The solvent was removed under reduced pressure to give crude 2,2,14,14-tetramethyl-8-(tetrahydropyran-2-yloxy)-pentadecane-1,15-diol as a colorless oil (8.9 g, 90%), which was used without further purification. 1H NMR (300 MHz, CDCl3/TMS): δ (ppm): 4.72-4.59 (m, 1H), 4.03-3.84 (m, 1H), 3.69-3.38 (m, 2H), 3.31 (s, 4H), 2.00-1.15 (m, 28H), 0.87 (s, 12H). 13C NMR (75 MHz, CDCl3/TMS): δ (ppm): 97.38, 76.57, 71.83, 62.65, 38.55, 34.96, 34.84, 33.33, 31.17, 30.75, 30.63, 26.92, 25.52, 24.95, 23.84, 23.70, 19.96. HRMS (EI, POS): Calcd for C24H48O4 (M+): 400.3553. found: 400.3564. cooled with an ice/water bath The ether solution was decanted from the formed white residue The residue was washed with MTBE (4×20 mL) the combined ether solutions were dried over MgSO4 The solvent was removed under reduced pressure

Conditions: temp:0.00; pressure:0.00; stir:; See reaction.notes.procedure_details.

Procedure: Under nitrogen atmosphere, 3,4-dihydro-2H-pyran (10.2 g, 121 mmol) was added dropwise to a stirred solution of 8-hydroxy-2,2,14,14-tetramethypentadecanedioic acid diethyl ester (16.1 g, 40 mmol) and p-toluenesulfonic acid monohydrate (catalytic amounts) in methylene chloride (100 mL) under cooling with an ice bath. The reaction mixture was allowed to warm to room temperature and stirred overnight. After the reaction was completed (TLC), the solution was filtered through basic aluminum oxide (50 g), which was washed with methylene chloride (4×30 mL). The filtrate was concentrated in vacuo to give crude product (19.5 g), which was purified by chromatography (silica gel, 200 g, heptanes/ethyl acetate=20:1, 10:1) yielding 2,2,14,14-tetramethyl-8-(tetrahydropyran-2-yloxy)-pentadecanedioic acid diethyl ester as a colorless oil (12.1 g, 62%). 1H NMR (300 MHz, CDCl3/TMS): δ (ppm): 4.69-4.59 (m, 1H), 4.11 (q, J=7.3 Hz, 4H), 3.98-3.82 (m, 1H), 3.65-3.40 (m, 2H), 2.00-1.18 (m, 26H), 1.24 (t, J=7.1 Hz, 6H), 1.15 (s, 12H). 13C NMR (75 MHz, CDCl3/TMS): δ (ppm): 177.74, 97.36, 76.48, 62.61, 60.02, 42.05, 40.70, 40.63, 34.90, 33.38, 31.16, 30.32, 30.26, 25.48, 25.10, 24.86, 19.96, 14.23. under cooling with an ice bath the solution was filtered through basic aluminum oxide (50 g), which was washed with methylene chloride (4×30 mL) The filtrate was concentrated in vacuo to give crude product (19.5 g), which was purified by chromatography (silica gel, 200 g, heptanes/ethyl acetate=20:1, 10:1)

Conditions: temp:0.00; pressure:0.00; stir:; See reaction.notes.procedure_details.

Procedure: Under nitrogen atmosphere, LiAlH4 (2.2 g, 58 mmol) was suspended in anhydrous MTBE (250 mL) and cooled with an ice/water bath. 2,2,14,14-Tetramethyl-8-(tetrahydropyran-2-yloxy)-pentadecanedioic acid diethyl ester (12.0 g, 24.7 mmol) in anhydrous MTBE (100 mL) was added dropwise over 1.5 h. This mixture was left overnight at ambient temperature. After the reaction was completed, deionized water (4 mL) was added followed by 20% aqueous NaOH solution (5 mL) and water (14 mL). The ether solution was decanted from the formed white residue. The residue was washed with MTBE (4×20 mL) and the combined ether solutions were dried over MgSO4. The solvent was removed under reduced pressure to give crude 2,2,14,14-tetramethyl-8-(tetrahydropyran-2-yloxy)-pentadecane-1,15-diol as a colorless oil (8.9 g, 90%), which was used without further purification. 1H NMR (300 MHz, CDCl3/TMS): δ (ppm): 4.72-4.59 (m, 1 H), 4.03-3.84 (m, 1 H), 3.69-3.38 (m, 2 H), 3.31 (s, 4 H), 2.00-1.15 (m, 28 H), 0.87(s, 12 H). 13C NMR (75 MHz, CDCl3/TMS): δ (ppm): 97.38, 76.57, 71.83, 62.65, 38.55, 34.96, 34.84, 33.33, 31.17, 30.75, 30.63, 26.92, 25.52, 24.95, 23.84, 23.70, 19.96. HRMS (EL, POS): Calcd for C24H48O4 (M+): 400.3553, found: 400.3564. cooled with an ice/water bath The ether solution was decanted from the formed white residue The residue was washed with MTBE (4×20 mL) the combined ether solutions were dried over MgSO4 The solvent was removed under reduced pressure

Conditions: temp:0.00; pressure:0.00; stir:; See reaction.notes.procedure_details.

Procedure: Under nitrogen atmosphere, 3,4-dihydro-2H-pyran (10.2 g, 121 mmol) was added dropwise to a stirred solution of 8-hydroxy-2,2,14,14-tetramethypentadecanedioic acid diethyl ester (16.1 g, 40 mmol) and p-toluenesulfonic acid monohydrate (catalytic amounts) in methylene chloride (100 mL) under cooling with an ice bath. The reaction mixture was allowed to warm to room temperature and stirred overnight. After the reaction was completed (TLC), the solution was filtered through basic aluminum oxide (50 g), which was washed with methylene chloride (4×30 mL). The filtrate was concentrated in vacuo to give crude product (19.5 g), which was purified by chromatography (silica gel, 200 g, heptanes/ethyl acetate=20:1, 10:1) yielding 2,2,14,14-tetramethyl-8-(tetrahydropyran-2-yloxy)-pentadecanedioic acid diethyl ester as a colorless oil (12.1 g, 62%). 1H NMR (300 MHz, CDCl3/TMS): δ (ppm): 4.69-4.59 (m, 1 H), 4.11 (q, J=7.3 Hz, 4 H), 3.98-3.82 (m, 1 H), 3.65-3.40 (m, 2 H), 2.00-1.18 (m, 26 H), 1.24 (t, J=7.1 Hz, 6 H), 1.15 (s, 12 H). 13C NMR (75 MHz, CDCl3/TMS): δ (ppm): 177.74, 97.36, 76.48, 62.61, 60.02, 42.05, 40.70, 40.63, 34.90, 33.38, 31.16, 30.32, 30.26, 25.48, 25.10, 24.86, 19.96, 14.23. under cooling with an ice bath the solution was filtered through basic aluminum oxide (50 g), which was washed with methylene chloride (4×30 mL) The filtrate was concentrated in vacuo to give crude product (19.5 g), which was purified by chromatography (silica gel, 200 g, heptanes/ethyl acetate=20:1, 10:1)

Conditions: temp:0.00; pressure:0.00; stir:; See reaction.notes.procedure_details.

Procedure: Under nitrogen atmosphere, LiAlH4 (2.2 g, 58 mmol) was suspended in anhydrous MTBE (250 mL) and cooled with an ice/water bath. 2,2,14,14-Tetramethyl-8-(tetrahydropyran-2-yloxy)-pentadecanedioic acid diethyl ester (12.0 g, 24.7 mmol) in anhydrous MTBE (100 mL) was added dropwise over 1.5 h. This mixture was left overnight at ambient temperature. After the reaction was completed, deionized water (4 mL) was added followed by 20% aqueous NaOH solution (5 mL) and water (14 mL). The ether solution was decanted from the formed white residue. The residue was washed with MTBE (4×20 mL) and the combined ether solutions were dried over MgSO4. The solvent was removed under reduced pressure to give crude 2,2,14,14-tetramethyl-8-(tetrahydropyran-2-yloxy)-pentadecane-1,15-diol as a colorless oil (8.9 g, 90%), which was used without further purification. 1H NMR (300 MHz, CDCl3/TMS): δ (ppm): 4.72-4.59 (m, 1H), 4.03-3.84 (m, 1H), 3.69-3.38 (m, 2H), 3.31 (s, 4H), 2.00-1.15 (m, 28H), 0.87 (s, 12H). 13C NMR (75 MHz, CDCl3/TMS): δ (ppm): 97.38, 76.57, 71.83, 62.65, 38.55, 34.96, 34.84, 33.33, 31.17, 30.75, 30.63, 26.92, 25.52, 24.95, 23.84, 23.70, 19.96. HRMS (EI, POS): Calcd for C24H48O4 (M+): 400.3553. found: 400.3564. cooled with an ice/water bath The ether solution was decanted from the formed white residue The residue was washed with MTBE (4×20 mL) the combined ether solutions were dried over MgSO4 The solvent was removed under reduced pressure

Conditions: temp:0.00; pressure:0.00; stir:; See reaction.notes.procedure_details.

Procedure: Under nitrogen atmosphere, 3,4-dihydro-2H-pyran (10.2 g, 121 mmol) was added dropwise to a stirred solution of 8-hydroxy-2,2,14,14-tetramethypentadecanedioic acid diethyl ester (16.1 g, 40 mmol) and p-toluenesulfonic acid monohydrate (catalytic amounts) in methylene chloride (100 mL) under cooling with an ice bath. The reaction mixture was allowed to warm to room temperature and stirred overnight. After the reaction was completed (TLC), the solution was filtered through basic aluminum oxide (50 g), which was washed with methylene chloride (4×30 mL). The filtrate was concentrated in vacuo to give crude product (19.5 g), which was purified by chromatography (silica gel, 200 g, heptanes/ethyl acetate=20:1, 10:1) yielding 2,2,14,14-tetramethyl-8-(tetrahydropyran-2-yloxy)-pentadecanedioic acid diethyl ester as a colorless oil (12.1 g, 62%). 1H NMR (300 MHz, CDCl3/TMS): δ (ppm): 4.69-4.59 (m, 1H), 4.11 (q, J=7.3 Hz, 4H), 3.98-3.82 (m, 1H), 3.65-3.40 (m, 2H), 2.00-1.18 (m, 26H), 1.24 (t, J=7.1 Hz, 6H), 1.15 (s, 12H). 13C NMR (75 MHz, CDCl3/TMS): δ (ppm): 177.74, 97.36, 76.48, 62.61, 60.02, 42.05, 40.70, 40.63, 34.90, 33.38, 31.16, 30.32, 30.26, 25.48, 25.10, 24.86, 19.96, 14.23. under cooling with an ice bath the solution was filtered through basic aluminum oxide (50 g), which was washed with methylene chloride (4×30 mL) The filtrate was concentrated in vacuo to give crude product (19.5 g), which was purified by chromatography (silica gel, 200 g, heptanes/ethyl acetate=20:1, 10:1)