Reaction #3832178
Related Literature (1)
openreactiondata ↗doi:10.1039/C8SC04228D
Conditions: temp:0.00; pressure:0.00; stir:
Source ID: ord-3baa9357ef554b6383a22c2cc0c10504No renderable structure data available
CCCCCCC#CClChemical Intermediate
Structures, identifiers and computed properties have been matched to the database record by CAS.
| Intermediates | 1-chlorooct-1-yne |
|---|---|
| IUPAC Name | — |
| CAS Number | 64531-26-6 |
| Database ID | 11040825 |
| Molecular Formula | — |
| Molecular Weight | — |
Product Information
1-chlorooct-1-yne (CAS 64531-26-6) product identity, structure identifiers and related reaction data for chemical intermediate research and sourcing review.
Potential Applications
For professional research and industrial use only
Database ID 11040825
Safety Notice
For professional research and industrial use only. Review the supplier safety data sheet before handling.
Synthesis data
7 reactions · 7 references
Conditions: temp:0.00; pressure:0.00; stir:
Source ID: ord-3baa9357ef554b6383a22c2cc0c10504Conditions: temp:0.01; pressure:0.00; stir:; See reaction.notes.procedure_details.
Procedure: To a mixture of 0.24 g (8.0 mmol) of 80% sodium hydride and 8 mL of dry diglyme was added at 0° C. 3.75 mL (7.50 mmol) of 2.0M trimethylaluminum in hexane. The reaction mixture was warmed to room temperature, stirred for 2 hours, and then was filtered under argon through a medium glass frit. The hexane contained in the filtrate was removed under reduced pressure (25° C., 30 torr), and the clear solution of sodium trimethylaluminum hydride obtained was treated at 0° C. with 0.72 g (5.0 mmol) of 1-chloro-1-octyne and 0.70 mL (5.0 mmol) of n-heptane as an internal GC standard. The solution was stirred for one hour at 0° C. (hydrolysis of an aliquot at this point revealed by GC 89% trans-1-chloro-1-octene and 11% 1-octyne) and to the solution was added 0.40 g (7.5 mmol) of sodium methoxide. The mixture was then warmed to 50° C. and stirred overnight. Hydrolysis and GC analysis of an aliquot showed 69% cis-2-nonene (containing <0.5% trans-2-nonene) and 31% 1-octyne. The reaction was cooled to -78° C. and treated with a solution of 1.59 g (6.25 mmol) of iodine in 5 mL of diglyme. After warming the reaction mixture to 25° C., GC examination of an aliquot showed complete iodination had occurred, as no residual cis-2-nonene was present after hydrolysis. However, due to the formation of some 1-iodo-1-octyne, the reaction solution was additionally treated with 1.0 mL (2.0 mmol) of 2.0M trimethylaluminum in hexane, which after 24 hours at room temperature had converted all 1-iodo-1-octyne into 1-octyne (after protonolysis), thereby simplifying the isolation procedure. The reaction mixture was slowly poured into a mixture of 3N HCl and pentane. The aqueous layer was extracted with pentane and the combined organic phase was washed sequentially with 3N HCl, saturated NaHCO3, 20% Na2SO3, and saturated NaCl. Concentration and short-path distillation provided 0.79 g (63%) of the 2-iodo-2-nonene: bp=45./0.1 torr; IR (neat) 3020 (w), 2950 (s), 2920 (s), 2850 (s), 1638 (m), 1465 (m), 1455 (m), 1385 (m), 1135 (m), 1060 (m) cm-1 ; 1H--NMR (CDCl3, TMS) 0.90 (t, 3H), 1.2-1.5 (br s, 8H), 2.05 (m, 2H), 2.35 (d, J=1.5 Hz, 3H), 6.15 (tq, J=7.2, 1.5 Hz, 1H). hydrolysis of an aliquot at this point The mixture was then warmed to 50° C. stirred overnight Hydrolysis and GC analysis of an aliquot The reaction was cooled to -78° C. After warming the reaction mixture to 25° C. after hydrolysis The aqueous layer was extracted with pentane the combined organic phase was washed sequentially with 3N HCl, saturated NaHCO3, 20% Na2SO3, and saturated NaCl Concentration and short-path distillation
Source ID: ord-cb14fe29739948cdabf42bb0b9c50fdbConditions: temp:0.01; pressure:0.00; stir:; See reaction.notes.procedure_details.
Procedure: To a mixture of 0.24 g (8.0 mmol) of 80% sodium hydride and 8 mL of dry diglyme was added at 0° C. 3.75 mL (7.50 mmol) of 2.0M trimethylaluminum in hexane. The reaction mixture was warmed to room temperature, stirred for 2 hours, and then was filtered under argon through a medium glass frit. The hexane contained in the filtrate was removed under reduced pressure (25° C., 30 torr), and the clear solution of sodium trimethylaluminum hydride obtained was treated at 0° C. with 0.72 g (5.0 mmol) of 1-chloro-1-octyne and 0.70 mL (5.0 mmol) of n-heptane as an internal GC standard. The solution was stirred for one hour at 0° C. (hydrolysis of an aliquot at this point revealed by GC 89% trans-1-chloro-1-octene and 11% 1-octyne) and to the solution was added 0.40 g (7.5 mmol) of sodium methoxide. The mixture was then warmed to 50° C. and stirred overnight. Hydrolysis and GC analysis of an aliquot showed 69% cis-2-nonene (containing <0.5% trans-2-nonene) and 31% 1-octyne. The reaction was cooled to -78° C. and treated with a solution of 1.59 g (6.25 mmol) of iodine in 5 mL of diglyme. After warming the reaction mixture to 25° C., GC examination of an aliquot showed complete iodination had occurred, as no residual cis-2-nonene was present after hydrolysis. However, due to the formation of some 1-iodo-1-octyne, the reaction solution was additionally treated with 1.0 mL (2.0 mmol) of 2.0M trimethylaluminum in hexane, which after 24 hours at room temperature had converted all 1-iodo-1-octyne into 1-octyne (after protonolysis), thereby simplifying the isolation procedure. The reaction mixture was slowly poured into a mixture of 3N HCl and pentane. The aqueous layer was extracted with pentane and the combined organic phase was washed sequentially with 3N HCl, saturated NaHCO3, 20% Na2SO3, and saturated NaCl. Concentration and short-path distillation provided 0.79 g (63%) of the 2-iodo-2-nonene: bp=45./0.1 torr; IR (neat) 3020 (w), 2950 (s), 2920 (s), 2850 (s), 1638 (m), 1465 (m), 1455 (m), 1385 (m), 1135 (m), 1060 (m) cm-1 ; 1H--NMR (CDCl3, TMS) 0.90 (t, 3H), 1.2-1.5 (br s, 8H), 2.05 (m, 2H), 2.35 (d, J=1.5 Hz, 3H), 6.15 (tq, J=7.2, 1.5 Hz, 1H). hydrolysis of an aliquot at this point The mixture was then warmed to 50° C. stirred overnight Hydrolysis and GC analysis of an aliquot The reaction was cooled to -78° C. After warming the reaction mixture to 25° C. after hydrolysis The aqueous layer was extracted with pentane the combined organic phase was washed sequentially with 3N HCl, saturated NaHCO3, 20% Na2SO3, and saturated NaCl Concentration and short-path distillation
Source ID: ord-cb14fe29739948cdabf42bb0b9c50fdbConditions: temp:0.00; pressure:0.00; stir:; See reaction.notes.procedure_details.
Procedure: Addition of 1-chloro-1-octyne to 1.5 equivalents of sodium trimethylaluminum hydride in diglyme at 0° C. with stirring for one hour resulted in the regio- and stereoselective formation of the E-alpha-chloroalkenylalanate, [HexHC=C(Cl)AlMe3 ]-Na+, in 89% yield as evidenced from 1H-NMR (the vinylic proton was present as a triplet, J=8 Hz, at 5.88 ppm) and gas chromatography (GC) analysis of the trans-1-chloro-1-octene obtained upon protonolysis. None of the corresponding cis-1-chloro-1-octene was observed by a gas chromatography comparison with an authentic sample. In addition, 11% of 1-octyne was found by gas chromatography. Allowing the reaction mixture to warm to room temperature and stirring for two hours produced by gas chromatography analysis cis-2-nonene (17%) with no trans-1-chloro-1-octene remaining. Hence, the migratory insertion reaction of the foregoing alpha-chloroalkenylalanate to form the vinylalane, HexHC=C(Me)AlMe2, did occur. resulted in the regio- and stereoselective formation of the E-alpha-chloroalkenylalanate, [HexHC=C(Cl)AlMe3 ]-Na+, in 89% yield obtained upon protonolysis stirring for two hours
Source ID: ord-178e4cceda684e30be55da41a54c5d05Conditions: temp:0.00; pressure:0.00; stir:
Source ID: ord-3baa9357ef554b6383a22c2cc0c10504Conditions: temp:0.01; pressure:0.00; stir:; See reaction.notes.procedure_details.
Procedure: To a mixture of 0.24 g (8.0 mmol) of 80% sodium hydride and 8 mL of dry diglyme was added at 0° C. 3.75 mL (7.50 mmol) of 2.0M trimethylaluminum in hexane. The reaction mixture was warmed to room temperature, stirred for 2 hours, and then was filtered under argon through a medium glass frit. The hexane contained in the filtrate was removed under reduced pressure (25° C., 30 torr), and the clear solution of sodium trimethylaluminum hydride obtained was treated at 0° C. with 0.72 g (5.0 mmol) of 1-chloro-1-octyne and 0.70 mL (5.0 mmol) of n-heptane as an internal GC standard. The solution was stirred for one hour at 0° C. (hydrolysis of an aliquot at this point revealed by GC 89% trans-1-chloro-1-octene and 11% 1-octyne) and to the solution was added 0.40 g (7.5 mmol) of sodium methoxide. The mixture was then warmed to 50° C. and stirred overnight. Hydrolysis and GC analysis of an aliquot showed 69% cis-2-nonene (containing <0.5% trans-2-nonene) and 31% 1-octyne. The reaction was cooled to -78° C. and treated with a solution of 1.59 g (6.25 mmol) of iodine in 5 mL of diglyme. After warming the reaction mixture to 25° C., GC examination of an aliquot showed complete iodination had occurred, as no residual cis-2-nonene was present after hydrolysis. However, due to the formation of some 1-iodo-1-octyne, the reaction solution was additionally treated with 1.0 mL (2.0 mmol) of 2.0M trimethylaluminum in hexane, which after 24 hours at room temperature had converted all 1-iodo-1-octyne into 1-octyne (after protonolysis), thereby simplifying the isolation procedure. The reaction mixture was slowly poured into a mixture of 3N HCl and pentane. The aqueous layer was extracted with pentane and the combined organic phase was washed sequentially with 3N HCl, saturated NaHCO3, 20% Na2SO3, and saturated NaCl. Concentration and short-path distillation provided 0.79 g (63%) of the 2-iodo-2-nonene: bp=45./0.1 torr; IR (neat) 3020 (w), 2950 (s), 2920 (s), 2850 (s), 1638 (m), 1465 (m), 1455 (m), 1385 (m), 1135 (m), 1060 (m) cm-1 ; 1H--NMR (CDCl3, TMS) 0.90 (t, 3H), 1.2-1.5 (br s, 8H), 2.05 (m, 2H), 2.35 (d, J=1.5 Hz, 3H), 6.15 (tq, J=7.2, 1.5 Hz, 1H). hydrolysis of an aliquot at this point The mixture was then warmed to 50° C. stirred overnight Hydrolysis and GC analysis of an aliquot The reaction was cooled to -78° C. After warming the reaction mixture to 25° C. after hydrolysis The aqueous layer was extracted with pentane the combined organic phase was washed sequentially with 3N HCl, saturated NaHCO3, 20% Na2SO3, and saturated NaCl Concentration and short-path distillation
Source ID: ord-cb14fe29739948cdabf42bb0b9c50fdbConditions: temp:0.00; pressure:0.00; stir:; See reaction.notes.procedure_details.
Procedure: Addition of 1-chloro-1-octyne to 1.5 equivalents of sodium trimethylaluminum hydride in diglyme at 0° C. with stirring for one hour resulted in the regio- and stereoselective formation of the E-alpha-chloroalkenylalanate, [HexHC=C(Cl)AlMe3 ]-Na+, in 89% yield as evidenced from 1H-NMR (the vinylic proton was present as a triplet, J=8 Hz, at 5.88 ppm) and gas chromatography (GC) analysis of the trans-1-chloro-1-octene obtained upon protonolysis. None of the corresponding cis-1-chloro-1-octene was observed by a gas chromatography comparison with an authentic sample. In addition, 11% of 1-octyne was found by gas chromatography. Allowing the reaction mixture to warm to room temperature and stirring for two hours produced by gas chromatography analysis cis-2-nonene (17%) with no trans-1-chloro-1-octene remaining. Hence, the migratory insertion reaction of the foregoing alpha-chloroalkenylalanate to form the vinylalane, HexHC=C(Me)AlMe2, did occur. resulted in the regio- and stereoselective formation of the E-alpha-chloroalkenylalanate, [HexHC=C(Cl)AlMe3 ]-Na+, in 89% yield obtained upon protonolysis stirring for two hours
Source ID: ord-178e4cceda684e30be55da41a54c5d05PubChem References
These sources are listed in the compound's public database record.
Request a Quote
Send the required specification, quantity, destination and intended use. The CATO team will review availability and respond.
