N-benzyl-N-methyloctan-1-amine

Conditions: temp:80.01; pressure:0.00; stir:; See reaction.notes.procedure_details.

Procedure: 254.5 g Freshly distilled N-methylbenzylamine (2.1 mole, fw=121.18, ˜271 mL) is added to 350 mL stirring acetonitrile in a 1 L 4-neck round-bottom flask that is equipped with a heating mantle, mechanical stirrer, 250 mL addition funnel, reflux condensor and teflon-coated thermocouple. The reaction is carried out under a nitrogen atmosphere with a slow N2 purge. 135.2 g Freshly distilled 1-bromooctane (0.70 mole, fw=221.19, ˜121 mL) is added to the stirring mixture in a dropwise fashion at such a rate that the reaction exotherm maintains the reaction temperature in the range 55-65° C. Under these conditions, the bromooctane addition requires about 2 hours. After the entire bromodecane is added and the reaction temperature drops below 45° C., the stirring reaction mixture is heated to 80° C. for 2 hr and then allowed cool. The reaction mixture is periodically monitored by HPLC in order to ensure that the bromooctane is entirely consumed. As the reaction cools, a less dense upper layer of the product begins to form. Upon cooling as the reaction to ambient temperature, 100 mL distilled water is added portionwise to the stirring mixture in order to facilitate phase separation and prevent crystallization of amine hydrobromide. The reaction mixture is transferred to a 1 L separatory funnel and them cooled to about −20° C. for 2 hours in order to achieve full phase separation. The lower phase is discarded and the upper phase is retained in the funnel. 1.0 L 10% w/w NaOH in distilled water is added, the mixture is thoroughly mixed and then allowed to settle for about 1 hour. The phases are again separated, the upper product phase is retained, 1.0 L distilled water is added to the mixture that is through mixed. The phases are separated after about 2 hours, and the upper product phase is placed in a rotary evaporator (80° C. bath temp.) in order to remove water, acetonitrile and some residual starting amine. This procedure yields 143 g (88%) of a pale yellow viscous liquid with a purity of 96-98% (GC, HPLC). The major impurity is the starting amine (2-4%). This material is vacuum distilled (172-175° C., 1 torr) giving a 90% distillation yield of a colorless liquid (99.8% purity). This is a clean reaction that produces good quality product if the starting secondary amine and primary alkyl halide are themselves pure. is equipped with a heating mantle, mechanical stirrer, 250 mL addition funnel purge 135.2 g Freshly distilled 1-bromooctane (0.70 mole, fw=221.19, ˜121 mL) is added to the stirring mixture in a dropwise fashion at such a rate that the reaction exotherm in the range 55-65° C Under these conditions, the bromooctane addition After the entire bromodecane is added drops below 45° C. the stirring reaction mixture allowed cool is entirely consumed to form Upon cooling as the reaction to ambient temperature 100 mL distilled water is added portionwise to the stirring mixture in order phase separation crystallization of amine hydrobromide The reaction mixture is transferred to a 1 L separatory funnel them cooled to about −20° C. for 2 hours in order phase separation 1.0 L 10% w/w NaOH in distilled water is added the mixture is thoroughly mixed to settle for about 1 hour The phases are again separated 1.0 L distilled water is added to the mixture that through mixed The phases are separated after about 2 hours the upper product phase is placed in a rotary evaporator (80° C. bath temp.) in order to remove water, acetonitrile

Conditions: temp:80.01; pressure:0.00; stir:; See reaction.notes.procedure_details.

Procedure: 254.5 g Freshly distilled N-methylbenzylamine (2.1 mole, fw=121.18, ˜271 mL) is added to 350 mL stirring acetonitrile in a 1 L 4-neck round-bottom flask that is equipped with a heating mantle, mechanical stirrer, 250 mL addition funnel, reflux condensor and teflon-coated thermocouple. The reaction is carried out under a nitrogen atmosphere with a slow N2 purge. 135.2 g Freshly distilled 1-bromooctane (0.70 mole, fw=221.19, ˜121 mL) is added to the stirring mixture in a dropwise fashion at such a rate that the reaction exotherm maintains the reaction temperature in the range 55-65° C. Under these conditions, the bromooctane addition requires about 2 hours. After the entire bromodecane is added and the reaction temperature drops below 45° C., the stirring reaction mixture is heated to 80° C. for 2 hr and then allowed cool. The reaction mixture is periodically monitored by HPLC in order to ensure that the bromooctane is entirely consumed. As the reaction cools, a less dense upper layer of the product begins to form. Upon cooling as the reaction to ambient temperature, 100 mL distilled water is added portionwise to the stirring mixture in order to facilitate phase separation and prevent crystallization of amine hydrobromide. The reaction mixture is transferred to a 1 L separatory funnel and them cooled to about −20° C. for 2 hours in order to achieve full phase separation. The lower phase is discarded and the upper phase is retained in the funnel. 1.0 L 10% w/w NaOH in distilled water is added, the mixture is thoroughly mixed and then allowed to settle for about 1 hour. The phases are again separated, the upper product phase is retained, 1.0 L distilled water is added to the mixture that is through mixed. The phases are separated after about 2 hours, and the upper product phase is placed in a rotary evaporator (80° C. bath temp.) in order to remove water, acetonitrile and some residual starting amine. This procedure yields 143 g (88%) of a pale yellow viscous liquid with a purity of 96-98% (GC, HPLC). The major impurity is the starting amine (2-4%). This material is vacuum distilled (172-175° C., 1 torr) giving a 90% distillation yield of a colorless liquid (99.8% purity). This is a clean reaction that produces good quality product if the starting secondary amine and primary alkyl halide are themselves pure. is equipped with a heating mantle, mechanical stirrer, 250 mL addition funnel purge 135.2 g Freshly distilled 1-bromooctane (0.70 mole, fw=221.19, ˜121 mL) is added to the stirring mixture in a dropwise fashion at such a rate that the reaction exotherm in the range 55-65° C Under these conditions, the bromooctane addition After the entire bromodecane is added drops below 45° C. the stirring reaction mixture allowed cool is entirely consumed to form Upon cooling as the reaction to ambient temperature 100 mL distilled water is added portionwise to the stirring mixture in order phase separation crystallization of amine hydrobromide The reaction mixture is transferred to a 1 L separatory funnel them cooled to about −20° C. for 2 hours in order phase separation 1.0 L 10% w/w NaOH in distilled water is added the mixture is thoroughly mixed to settle for about 1 hour The phases are again separated 1.0 L distilled water is added to the mixture that through mixed The phases are separated after about 2 hours the upper product phase is placed in a rotary evaporator (80° C. bath temp.) in order to remove water, acetonitrile