4-methoxy-1H-indole

Conditions: temp:0.00; pressure:0.00; stir:

Conditions: temp:0.00; pressure:0.00; stir:

Conditions: temp:60.01; pressure:0.00; stir:

Conditions: temp:60.01; pressure:0.00; stir:

Conditions: temp:0.00; pressure:0.00; stir:

Conditions: temp:0.01; pressure:0.00; stir:; See reaction.notes.procedure_details.

Procedure: To a solution of 4-methoxy-1H-indole (7.15 g, 49 mmol) and pyridine (19.7 mL, 243 mmol) in dichloromethane (50 mL) at 0° C. under Nitrogen was added dropwise a solution of trichloroacetyl chloride (27.1 mL, 243 mmol) in dichloromethane (50 mL). After stirring at 0° C. for an additional 1.5 h, the mixture was concentrated in vacuo. The residue was taken up in the minimal volume of methanol necessary and placed in a freezer overnight. The precipitate was filtered, rinsed well with methanol, and dried to yield 4-methoxy-3-trichloroacetyl-1H-indole. To a stirring solution of sodium methoxide (3.5 mL of a 25 weight % solution in methanol) in methanol (200 mL) at ambient temperature was added 4-methoxy-3-trichloroacetyl-1H-indole (9.07 g, 31.0 mmol) in portions over 0.75 h. After stirring an additional 0.75 h, the mixture was cooled in an ice bath, diluted with ice water, acidified with concentrated hydrochloric acid, and the methanol removed in vacuo. The resulting heterogeneous mixture was cooled in an ice bath, the precipitate filtered, rinsed with water, and dried to afford methyl 4-methoxy-1H-indole-3-carboxylic ester. A slurry of this ester (5.6 g 27 mmol) in 50% aqueous sodium hydroxide (50 mL) and methanol (50 mL) was stirred at ambient temperature for 19 h. The mixture was cooled in an ice bath, acidified with concentrated hydrochloric acid, the precipitate filtered, rinsed with ice water, and dried to afford 4-methoxy-1H-indole-3-carboxylic acid. the mixture was concentrated in vacuo placed in a freezer overnight The precipitate was filtered rinsed well with methanol dried

Conditions: temp:0.00; pressure:0.00; stir:; See reaction.notes.procedure_details.

Procedure: A solution of dry DMF (0.75 g) in 50 ml dichloroethane was cooled to 0° C. and placed under nitrogen. Oxalyl chloride (1.03 g) dissolved in dichloroethane (5 ml) was added dropwise with stirring. The solution was stirred until no more bubbling was observed (about 15-20 m). 4-Methoxyindole (1.0 g, 6.7 mmole) was added to the solution as a solid and the reaction mixture was stirred at room temperature for four hours. The reaction was quenched by careful addition of 10% sodium carbonate solution. The two phase mixture was stirred at room temperature for 2 hours. The layers were separated and the aqueous layer was extracted with methylene chloride, and the combined organic extracts were dried and evaporated to dryness. The crude residue was passed through a short silica gel column, eluting with 3:7 ethyl acetate:hexane to 1:1 ethyl acetate:hexane to yield 1.13 g (95%) of 4-methoxy-1H-indole-3-carbaldehyde. was added dropwise The solution was stirred until no more bubbling the reaction mixture was stirred at room temperature for four hours The reaction was quenched by careful addition of 10% sodium carbonate solution The two phase mixture was stirred at room temperature for 2 hours The layers were separated the aqueous layer was extracted with methylene chloride the combined organic extracts were dried evaporated to dryness eluting with 3:7 ethyl acetate

Conditions: temp:0.00; pressure:0.00; stir:; See reaction.notes.procedure_details.

Procedure: A solution of dry DMF (0.75 g) in 50 ml dichloroethane was cooled to 0° C. and placed under nitrogen. Oxalyl chloride (1.03 g) dissolved in dichloroethane (5 ml) was added dropwise with stirring. The solution was stirred until no more bubbling was observed (about 15-20 m). 4-Methoxyindole (1.0 g, 6.7 mmole) was added to the solution as a solid and the reaction mixture was stirred at room temperature for four hours. The reaction was quenched by careful addition of 10% sodium carbonate solution. The two phase mixture was stirred at room temperature for 2 hours. The layers were separated and the aqueous layer was extracted with methylene chloride, and the combined organic extracts were dried and evaporated to dryness. The crude residue was passed through a short silica gel column, eluting with 3:7 ethyl acetate:hexane to 1:1 ethyl acetate:hexane to yield 1.13 g (95%) of 4-methoxy-1H-indole-3-carbaldehyde. was added dropwise The solution was stirred until no more bubbling the reaction mixture was stirred at room temperature for four hours The reaction was quenched by careful addition of 10% sodium carbonate solution The two phase mixture was stirred at room temperature for 2 hours The layers were separated the aqueous layer was extracted with methylene chloride the combined organic extracts were dried evaporated to dryness eluting with 3:7 ethyl acetate

Conditions: temp:0.00; pressure:0.00; stir:; See reaction.notes.procedure_details.

Procedure: 4-methoxyindole (0.735 g) was dissolved in acetic acid (25 ml) and cooled in an ice bath. To this solution was added sodium cyanoborohydride (0.942 g) in portions. After the addition was complete, the solution was allowed to come to room temperature and the solution was stirred for an hour. The solvent was removed under vacuum and the residue was taken up in ethyl acetate, washed with sodium carbonate solution, water and finally with brine. The organic layer was evaporated and the resulting product was purified on a silica gel column eluting with ethyl acetate:dichloromethane (5:95) to give 0.404 g of 4-methoxyindoline. cooled in an ice bath After the addition to come to room temperature The solvent was removed under vacuum washed with sodium carbonate solution, water and finally with brine The organic layer was evaporated the resulting product was purified on a silica gel column eluting with ethyl acetate:dichloromethane (5:95)

Conditions: temp:0.00; pressure:0.00; stir:; See reaction.notes.procedure_details.

Procedure: 4-methoxyindole (0.735 g) was dissolved in acetic acid (25 ml) and cooled in an ice bath. To this solution was added sodium cyanoborohydride (0.942 g) in portions. After the addition was complete, the solution was allowed to come to room temperature and the solution was stirred for an hour. The solvent was removed under vacuum and the residue was taken up in ethyl acetate, washed with sodium carbonate solution, water and finally with brine. The organic layer was evaporated and the resulting product was purified on a silica gel column eluting with ethyl acetate:dichloromethane (5:95) to give 0.404 g of 4-methoxyindoline. cooled in an ice bath After the addition to come to room temperature The solvent was removed under vacuum washed with sodium carbonate solution, water and finally with brine The organic layer was evaporated the resulting product was purified on a silica gel column eluting with ethyl acetate:dichloromethane (5:95)

Conditions: temp:0.01; pressure:0.00; stir:; See reaction.notes.procedure_details.

Procedure: To a solution of 4-methoxy-1H-indole (7.15 g, 49 mmol) and pyridine (19.7 mL, 243 mmol) in dichloromethane (50 mL) at 0° C. under Nitrogen was added dropwise a solution of trichloroacetyl chloride (27.1 mL, 243 mmol) in dichloromethane (50 mL). After stirring at 0° C. for an additional 1.5 h, the mixture was concentrated in vacuo. The residue was taken up in the minimal volume of methanol necessary and placed in a freezer overnight. The precipitate was filtered, rinsed well with methanol, and dried to yield 4-methoxy-3-trichloroacetyl-1H-indole. To a stirring solution of sodium methoxide (3.5 mL of a 25 weight % solution in methanol) in methanol (200 mL) at ambient temperature was added 4-methoxy-3-trichloroacetyl-1H-indole (9.07 g, 31.0 mmol) in portions over 0.75 h. After stirring an additional 0.75 h, the mixture was cooled in an ice bath, diluted with ice water, acidified with concentrated hydrochloric acid, and the methanol removed in vacuo. The resulting heterogeneous mixture was cooled in an ice bath, the precipitate filtered, rinsed with water, and dried to afford methyl 4-methoxy-1H-indole-3-carboxylic ester. A slurry of this ester (5.6 g 27 mmol) in 50% aqueous sodium hydroxide (50 mL) and methanol 50 mL) was stirred at ambient temperature for 19 h. The mixture was cooled in an ice bath, acidified with concentrated hydrochloric acid, the precipitate filtered, rinsed with ice water, and dried to afford 4-methoxy-1H-indole-3-carboxylic acid. the mixture was concentrated in vacuo placed in a freezer overnight The precipitate was filtered rinsed well with methanol dried

Conditions: temp:0.00; pressure:0.00; stir:; See reaction.notes.procedure_details.

Procedure: Prepared according to a procedure analogous to that described for 7-chloro-2-(4,4,5,5-tetramethyl-[1,3,2]dioxaborolan-2-yl)-1H-indole using 4-methoxy-1H-indole. Prepared