(6aR)-6-methyl-5,6,6a,7-tetrahydro-4H-dibenzo[de,g]quinoline-10,11-diol

Conditions: temp:0.00; pressure:0.00; stir:; See reaction.notes.procedure_details.

Procedure: Apomorphine malate solution was prepared by dissolving apomorphine base in 0.1M Malic acid solution. Water was added to obtain solutions with a molar ratio of 1:1 apomorphine:malic acid, at a concentration of 2% apomorphine. The pH of each solution was 4.0. Table 5 shows the composition of each apomorphine organic salt solution.

Conditions: temp:0.00; pressure:0.00; stir:; See reaction.notes.procedure_details.

Procedure: Apomorphine tartrate solution was prepared by dissolving apomorphine base in 0.1M tartaric acid solution. Water was added to obtain solutions with a molar ratio of 1:1 or 1:0.5, apomorphine:tartaric acid, at a concentration of 2% apomorphine. The pH of each solution was 3.45 and 4.0, respectively.

Conditions: temp:0.00; pressure:0.00; stir:; See reaction.notes.procedure_details.

Procedure: Apomorphine aspartate solution was prepared by dissolving apomorphine base in 0.1M aspartic acid solution. Water was added to obtain a molar ratio of 1:1, apomorphine:aspartic acid, at a final concentration of 2% apomorphine. The pH of the solution was 4.9.

Conditions: temp:0.00; pressure:0.00; stir:; See reaction.notes.procedure_details.

Procedure: Apomorphine glutamate solution was prepared by dissolving apomorphine base in 0.1M glutamic acid solution. Water was added to obtain solutions with a molar ratio of 1:1 or 1:1.2, apomorphine:glutamic acid, at a final concentration of 2% apomorphine. The pH of each solution was 4.7 and 4.4, respectively.

Conditions: temp:0.00; pressure:0.00; stir:; See reaction.notes.procedure_details.

Procedure: The particulate apomorphine is combined with sodium carboxymethylcellulose and glycerol. The resulting mixture is mixed thoroughly (i.e., using a vacuum mixer) and homogenized. Water is added to the mixture (with extensive mixing) to form a hydrogel containing suspended nanoparticles of apomorphine hydrochloride. The resulting mixture is mixed thoroughly (i.e. to form a hydrogel containing

Conditions: temp:0.00; pressure:0.00; stir:; See reaction.notes.procedure_details.

Procedure: Gelatin and mannitol are dispersed in purified water and mixed thoroughly (i.e., using a vacuum mixer) and homogenized. Apomorphine hydrochloride is added and the mixture was again homogenized to ensure complete dissolution of the apomorphine hydrochloride. The pH of the solution is adjusted to about 3.0 (i.e., by addition of a suitable acid, such as citric acid). The solution is then poured onto a sheet and dried in a heated oven. mixed thoroughly (i.e. the mixture was again homogenized by addition of a suitable acid The solution is then poured onto a sheet dried in a heated oven

Conditions: temp:0.00; pressure:0.00; stir:; See reaction.notes.procedure_details.

Procedure: Gelatin and mannitol are dispersed in purified water and mixed thoroughly (i.e., using a vacuum mixer) and homogenized. Apomorphine hydrochloride is added and the mixture was again homogenized to ensure complete dissolution of the apomorphine hydrochloride. The pH of the solution is adjusted to about 3.0 (i.e., by addition of a suitable acid, such as citric acid). The solution is then poured onto a sheet and dried in a heated oven. mixed thoroughly (i.e. the mixture was again homogenized by addition of a suitable acid The solution is then poured onto a sheet dried in a heated oven

Conditions: temp:0.00; pressure:0.00; stir:; See reaction.notes.procedure_details.

Procedure: 6-OHDA was dissolved at 2 mg/mL in a physiolosical saline solution containing 0.2% L-ascorbic acid. Desipramine was dissolved at 10 mg/mL in a physiolosical saline solution in a hot-water bath. Apomorphine was dissolved at 0.1 mg/mL in a physiolosical saline solution. Ropinirole was dissolved in distilled water. Test compounds were dissolved in a solution containing 2% DMA, 100 or 200 mol % hydrochloric acid, and 98% of a 0.5% methyl cellulose solution. Test compounds were dissolved in a solution

Conditions: temp:0.00; pressure:0.00; stir:; See reaction.notes.procedure_details.

Procedure: 6-OHDA was dissolved at 2 mg/mL in a physiolosical saline solution containing 0.2% L-ascorbic acid. Desipramine was dissolved at 10 mg/mL in a physiolosical saline solution in a hot-water bath. Apomorphine was dissolved at 0.1 mg/mL in a physiolosical saline solution. Ropinirole was dissolved in distilled water. Test compounds were dissolved in a solution containing 2% DMA, 100 or 200 mol % hydrochloric acid, and 98% of a 0.5% methyl cellulose solution. Test compounds were dissolved in a solution

Conditions: temp:0.00; pressure:0.00; stir:; See reaction.notes.procedure_details.

Procedure: 6-OHDA was dissolved at 2 mg/mL in a physiolosical saline solution containing 0.2% L-ascorbic acid. Desipramine was dissolved at 10 mg/mL in a physiolosical saline solution in a hot-water bath. Apomorphine was dissolved at 0.1 mg/mL in a physiolosical saline solution. Ropinirole was dissolved in distilled water. Test compounds were dissolved in a solution containing 2% DMA, 100 or 200 mol % hydrochloric acid, and 98% of a 0.5% methyl cellulose solution. Test compounds were dissolved in a solution

Conditions: temp:0.00; pressure:0.00; stir:; See reaction.notes.procedure_details.

Procedure: The particulate apomorphine is combined with sodium carboxymethylcellulose and glycerol. The resulting mixture is mixed thoroughly (i.e., using a vacuum mixer) and homogenized. Water is added to the mixture (with extensive mixing) to form a hydrogel containing suspended nanoparticles of apomorphine hydrochloride. The resulting mixture is mixed thoroughly (i.e. to form a hydrogel containing

Conditions: temp:0.00; pressure:0.00; stir:; See reaction.notes.procedure_details.

Procedure: Gelatin and mannitol are dispersed in purified water and mixed thoroughly (i.e., using a vacuum mixer) and homogenized. Apomorphine hydrochloride is added and the mixture was again homogenized to ensure complete dissolution of the apomorphine hydrochloride. The pH of the solution is adjusted to about 3.0 (i.e., by addition of a suitable acid, such as citric acid). The solution is then poured onto a sheet and dried in a heated oven. mixed thoroughly (i.e. the mixture was again homogenized by addition of a suitable acid The solution is then poured onto a sheet dried in a heated oven