1-(chloromethyl)-4-propoxybenzene

Conditions: temp:40.01; pressure:0.00; stir:; See reaction.notes.procedure_details.

Procedure: To a stirred solution of 47.5 grams (0.30 mole) of ethyl piperidin-4-ylcarboxylate in 70 mL (0.40 mole) of N, N-diisopropylethylamine was added dropwise a solution of 52.5 grams (0.29 mole) of 4-propoxyphenylmethyl chloride in 50 mL of dimethyl sulfoxide. The reaction caused the reaction mixture temperature to rise to about 35° C. Upon completion of the addition the reaction mixture was stirred for 30 minutes, warmed to 40° C., and then allowed to cool to ambient temperature. After this time the reaction mixture was poured into 500 mL of aqueous 10% ammonium chloride. The mixture was extracted with three 250 mL portions of diethyl ether, and the combined extracts were washed with two 250 mL portions of an aqueous solution saturated with ammonium chloride, one 250 mL portion of water, and one 250 mL portion of an aqueous solution saturated with sodium chloride. The organic layer was dried with magnesium sulfate and filtered. The filtrate was concentrated under reduced pressure, yielding 80.0 grams of ethyl N-(4-propoxyphenylmethyl)piperidin-4-ylcarboxylate. The NMR spectrum was consistent with the proposed structure. to rise to about 35° C Upon completion of the addition the reaction mixture to cool to ambient temperature The mixture was extracted with three 250 mL portions of diethyl ether the combined extracts were washed with two 250 mL portions of an aqueous solution saturated with ammonium chloride, one 250 mL portion of water, and one 250 mL portion of an aqueous solution saturated with sodium chloride The organic layer was dried with magnesium sulfate filtered The filtrate was concentrated under reduced pressure

Conditions: temp:40.01; pressure:0.00; stir:; See reaction.notes.procedure_details.

Procedure: To a stirred solution of 47.5 grams (0.30 mole) of ethyl piperidin-4-ylcarboxylate in 70 mL (0.40 mole) of N, N-diisopropylethylamine was added dropwise a solution of 52.5 grams (0.29 mole) of 4-propoxyphenylmethyl chloride in 50 mL of dimethyl sulfoxide. The reaction caused the reaction mixture temperature to rise to about 35° C. Upon completion of the addition the reaction mixture was stirred for 30 minutes, warmed to 40° C., and then allowed to cool to ambient temperature. After this time the reaction mixture was poured into 500 mL of aqueous 10% ammonium chloride. The mixture was extracted with three 250 mL portions of diethyl ether, and the combined extracts were washed with two 250 mL portions of an aqueous solution saturated with ammonium chloride, one 250 mL portion of water, and one 250 mL portion of an aqueous solution saturated with sodium chloride. The organic layer was dried with magnesium sulfate and filtered. The filtrate was concentrated under reduced pressure, yielding 80.0 grams of ethyl N-(4-propoxyphenylmethyl)piperidin-4-ylcarboxylate. The NMR spectrum was consistent with the proposed structure. to rise to about 35° C Upon completion of the addition the reaction mixture to cool to ambient temperature The mixture was extracted with three 250 mL portions of diethyl ether the combined extracts were washed with two 250 mL portions of an aqueous solution saturated with ammonium chloride, one 250 mL portion of water, and one 250 mL portion of an aqueous solution saturated with sodium chloride The organic layer was dried with magnesium sulfate filtered The filtrate was concentrated under reduced pressure

Conditions: temp:40.01; pressure:0.00; stir:; See reaction.notes.procedure_details.

Procedure: To a stirred solution of 47.5 grams (0.30 mole) of ethyl piperidin-4-ylcarboxylate in 70 mL (0.40 mole) of N,N-diisopropylethylamine was added dropwise a solution of 52.5 grams (0.29 mole) of 4-propoxyphenylmethyl chloride in 50 mL of dimethyl sulfoxide. The reaction caused the reaction mixture temperature to rise to about 35° C. Upon completion of the addition the reaction mixture was stirred for 30 minutes, warmed to 40° C., and then allowed to cool to ambient temperature. After this time the reaction mixture was poured into 500 mL of aqueous 10% ammonium chloride. The mixture was extracted with three 250 mL portions of diethyl ether, and the combined extracts were washed with two 250 mL portions of an aqueous solution saturated with ammonium chloride, one 250 mL portion of water, and one 250 mL portion of an aqueous solution saturated with sodium chloride. The organic layer was dried with magnesium sulfate and filtered. The filtrate was concentrated under reduced pressure, yielding 80.0 grams of ethyl N-(4-propoxyphenylmethyl)piperidin-4-ylcarboxylate. The NMR spectrum was consistent with the proposed structure. to rise to about 35° C Upon completion of the addition the reaction mixture to cool to ambient temperature The mixture was extracted with three 250 mL portions of diethyl ether the combined extracts were washed with two 250 mL portions of an aqueous solution saturated with ammonium chloride, one 250 mL portion of water, and one 250 mL portion of an aqueous solution saturated with sodium chloride The organic layer was dried with magnesium sulfate filtered The filtrate was concentrated under reduced pressure

Conditions: temp:0.00; pressure:0.00; stir:; See reaction.notes.procedure_details.

Procedure: The method taught by R. A. Farr et al, J. Org. Chem. 1981, 46, 1212-1215, was used in the following two-step preparation. A vigorously stirred solution of 16.5 grams (0.129 mole) of 4-aminocarbonylpiperidine, 25.0 grams (0.135 mole) of 4-propoxyphenylmethyl chloride, and 19.4 grams (0.193 mole) of potassium bicarbonate in 200 mL of toluene was heated at reflux for 6.5 hours. The reaction mixture was then cooled, water was added, and the mixture was extracted with ethyl acetate. The extract was washed with two portions of an aqueous solution saturated with sodium chloride. The organic layer was dried with sodium sulfate and filtered. The filtrate was concentrated under reduced pressure to a solid residue, which was slurried in pentane and collected by filtration, yielding 28.2 grams of 4-aminocarbonyl-N-(4-propoxyphenylmethyl)piperidine, mp 142°-146° C. The NMR spectrum was consistent with the proposed structure. 1981, 46, 1212-1215, was used in the following two-step preparation at reflux for 6.5 hours The reaction mixture was then cooled the mixture was extracted with ethyl acetate The extract was washed with two portions of an aqueous solution saturated with sodium chloride The organic layer was dried with sodium sulfate filtered The filtrate was concentrated under reduced pressure to a solid residue, which collected by filtration

Conditions: temp:40.01; pressure:0.00; stir:; See reaction.notes.procedure_details.

Procedure: To a stirred solution of 47.5 grams (0.30 mole) of ethyl piperidin-4-ylcarboxylate in 70 mL (0.40 mole) of N,N-diisopropylethylamine was added dropwise a solution of 52.5 grams (0.29 mole) of 4-propoxyphenylmethyl chloride in 50 mL of dimethyl sulfoxide. The reaction caused the reaction mixture temperature to rise to about 35° C. Upon completion of the addition the reaction mixture was stirred for 30 minutes, warmed to 40° C., and then allowed to cool to ambient temperature After this time the reaction mixture was poured into 500 mL of aqueous 10% ammonium chloride. The mixture was extracted with three 250 mL portions of diethyl ether, and the combined extracts were washed with two 250 mL portions of an aqueous solution saturated with ammonium chloride, one 250 mL portion of water, and one 250 mL portion of an aqueous solution saturated with sodium chloride. The organic layer was dried with magnesium sulfate and filtered. The filtrate was concentrated under reduced pressure, yielding 80.0 grams of ethyl N-(4-propoxyphenylmethyl)piperidin-4-ylcarboxylate. The NMR spectrum was consistent with the proposed structure. to rise to about 35° C Upon completion of the addition the reaction mixture to cool to ambient temperature After this time the reaction mixture The mixture was extracted with three 250 mL portions of diethyl ether the combined extracts were washed with two 250 mL portions of an aqueous solution saturated with ammonium chloride, one 250 mL portion of water, and one 250 mL portion of an aqueous solution saturated with sodium chloride The organic layer was dried with magnesium sulfate filtered The filtrate was concentrated under reduced pressure

Conditions: temp:40.01; pressure:0.00; stir:; See reaction.notes.procedure_details.

Procedure: To a stirred solution of 47.5 grams (0.30 mole) of ethyl piperidin-4-ylcarboxylate in 70 mL (0.40 mole) of N,N-diisopropylethylamine was added dropwise a solution of 52.5 grams (0.29 mole) of 4-propoxyphenylmethyl chloride in 50 mL of dimethyl sulfoxide. The reaction caused the reaction mixture temperature to rise to about 35° C. Upon completion of the addition the reaction mixture was stirred for 30 minutes, warmed to 40° C., and then allowed to cool to ambient temperature After this time the reaction mixture was poured into 500 mL of aqueous 10% ammonium chloride. The mixture was extracted with three 250 mL portions of diethyl ether, and the combined extracts were washed with two 250 mL portions of an aqueous solution saturated with ammonium chloride, one 250 mL portion of water, and one 250 mL portion of an aqueous solution saturated with sodium chloride. The organic layer was dried with magnesium sulfate and filtered. The filtrate was concentrated under reduced pressure, yielding 80.0 grams of ethyl N-(4-propoxyphenylmethyl)piperidin-4-ylcarboxylate. The NMR spectrum was consistent with the proposed structure. to rise to about 35° C Upon completion of the addition the reaction mixture to cool to ambient temperature After this time the reaction mixture The mixture was extracted with three 250 mL portions of diethyl ether the combined extracts were washed with two 250 mL portions of an aqueous solution saturated with ammonium chloride, one 250 mL portion of water, and one 250 mL portion of an aqueous solution saturated with sodium chloride The organic layer was dried with magnesium sulfate filtered The filtrate was concentrated under reduced pressure

Conditions: temp:40.01; pressure:0.00; stir:; See reaction.notes.procedure_details.

Procedure: To a stirred solution of 47.5 grams (0.30 mole) of ethyl piperidin-4-ylcarboxylate in 70 mL (0.40 mole) of N, N-diisopropylethylamine was added dropwise a solution of 52.5 grams (0.29 mole) of 4-propoxyphenylmethyl chloride in 50 mL of dimethyl sulfoxide. The reaction caused the reaction mixture temperature to rise to about 35° C. Upon completion of the addition the reaction mixture was stirred for 30 minutes, warmed to 40° C., and then allowed to cool to ambient temperature. After this time the reaction mixture was poured into 500 mL of aqueous 10% ammonium chloride. The mixture was extracted with three 250 mL portions of diethyl ether, and the combined extracts were washed with two 250 mL portions of an aqueous solution saturated with ammonium chloride, one 250 mL portion of water, and one 250 mL portion of an aqueous solution saturated with sodium chloride. The organic layer was dried with magnesium sulfate and filtered. The filtrate was concentrated under reduced pressure, yielding 80.0 grams of ethyl N-(4-propoxyphenylmethyl)piperidin-4-ylcarboxylate. The NMR spectrum was consistent with the proposed structure. to rise to about 35° C Upon completion of the addition the reaction mixture to cool to ambient temperature The mixture was extracted with three 250 mL portions of diethyl ether the combined extracts were washed with two 250 mL portions of an aqueous solution saturated with ammonium chloride, one 250 mL portion of water, and one 250 mL portion of an aqueous solution saturated with sodium chloride The organic layer was dried with magnesium sulfate filtered The filtrate was concentrated under reduced pressure

Conditions: temp:40.01; pressure:0.00; stir:; See reaction.notes.procedure_details.

Procedure: A solution of 47.5 grams (0.30 mole) of ethyl piperidin-4-ylcarboxylate in 70 mL (0.40 mole) of N,N-diisopropylethylamine was stirred, and a solution of 52.5 grams (0.29 mole) of 4-propoxyphenylmethyl chloride in 50 mL of dimethyl sulfoxide was added dropwise. The reaction caused the reaction mixture temperature to rise to about 35° C. Upon completion of the addition the reaction mixture was stirred for 30 minutes, warmed to 40° C., and then allowed to cool to ambient temperature. After this time the reaction mixture was poured into 500 mL of aqueous 10% ammonium chloride. The mixture was extracted with three 250 mL portions of diethyl ether, and the combined extracts were washed with two 250 mL portions of an aqueous solution saturated with ammonium chloride, one 250 mL portion of water, and one 250 mL portion of an aqueous solution saturated with sodium chloride. The organic layer was dried with magnesium sulfate and filtered. The filtrate was concentrated under reduced pressure, yielding 80.0 grams of ethyl N-(4-propoxyphenylmethyl)-piperidin-4-ylcarboxylate. The NMR spectrum was consistent with the proposed structure: to rise to about 35° C Upon completion of the addition the reaction mixture to cool to ambient temperature The mixture was extracted with three 250 mL portions of diethyl ether the combined extracts were washed with two 250 mL portions of an aqueous solution saturated with ammonium chloride, one 250 mL portion of water, and one 250 mL portion of an aqueous solution saturated with sodium chloride The organic layer was dried with magnesium sulfate filtered The filtrate was concentrated under reduced pressure

Conditions: temp:40.01; pressure:0.00; stir:; See reaction.notes.procedure_details.

Procedure: To a stirred solution of 47.5 grams (0.30 mole) of ethyl piperidin-4-ylcarboxylate in 70 mL (0.40 mole) of N, N-diisopropylethylamine was added dropwise a solution of 52.5 grams (0.29 mole) of 4-propoxyphenylmethyl chloride in 50 mL of dimethyl sulfoxide. The reaction caused the reaction mixture temperature to rise to about 35° C. Upon completion of the addition the reaction mixture was stirred for 30 minutes, warmed to 40° C., and then allowed to cool to ambient temperature. After this time the reaction mixture was poured into 500 mL of aqueous 10% ammonium chloride. The mixture was extracted with three 250 mL portions of diethyl ether, and the combined extracts were washed with two 250 mL portions of an aqueous solution saturated with ammonium chloride, one 250 mL portion of water, and one 250 mL portion of an aqueous solution saturated with sodium chloride. The organic layer was dried with magnesium sulfate and filtered. The filtrate was concentrated under reduced pressure, yielding 80.0 grams of ethyl N-(4-propoxyphenylmethyl)piperidin-4-ylcarboxylate. The NMR spectrum was consistent with the proposed structure. to rise to about 35° C Upon completion of the addition the reaction mixture to cool to ambient temperature The mixture was extracted with three 250 mL portions of diethyl ether the combined extracts were washed with two 250 mL portions of an aqueous solution saturated with ammonium chloride, one 250 mL portion of water, and one 250 mL portion of an aqueous solution saturated with sodium chloride The organic layer was dried with magnesium sulfate filtered The filtrate was concentrated under reduced pressure

Conditions: temp:40.01; pressure:0.00; stir:; See reaction.notes.procedure_details.

Procedure: To a stirred solution of 47.5 grams (0.30 mole) of ethyl piperidin-4-ylcarboxylate in 70 mL (0.40 mole) of N, N-diisopropylethylamine was added dropwise a solution of 52.5 grams (0.29 mole) of 4-propoxyphenylmethyl chloride in 50 mL of dimethyl sulfoxide. The reaction caused the reaction mixture temperature to rise to about 35° C. Upon completion of the addition the reaction mixture was stirred for 30 minutes, warmed to 40° C., and then allowed to cool to ambient temperature. After this time the reaction mixture was poured into 500 mL of aqueous 10% ammonium chloride. The mixture was extracted with three 250 mL portions of diethyl ether, and the combined extracts were washed with two 250 mL portions of an aqueous solution saturated with ammonium chloride, one 250 mL portion of water, and one 250 mL portion of an aqueous solution saturated with sodium chloride. The organic layer was dried with magnesium sulfate and filtered. The filtrate was concentrated under reduced pressure, yielding 80.0 grams of ethyl N-(4-propoxyphenylmethyl)piperidin-4-ylcarboxylate. The NMR spectrum was consistent with the proposed structure. to rise to about 35° C Upon completion of the addition the reaction mixture to cool to ambient temperature The mixture was extracted with three 250 mL portions of diethyl ether the combined extracts were washed with two 250 mL portions of an aqueous solution saturated with ammonium chloride, one 250 mL portion of water, and one 250 mL portion of an aqueous solution saturated with sodium chloride The organic layer was dried with magnesium sulfate filtered The filtrate was concentrated under reduced pressure

Conditions: temp:40.01; pressure:0.00; stir:; See reaction.notes.procedure_details.

Procedure: To a stirred solution of 47.5 grams (0.30 mole) of ethyl piperidin-4-ylcarboxylate in 70 mL (0.40 mole) of N, N-diisopropylethylamine was added dropwise a solution of 52.5 grams (0.29 mole) of 4-propoxyphenylmethyl chloride in 50 mL of dimethyl sulfoxide. The reaction caused the reaction mixture temperature to rise to about 35° C. Upon completion of the addition the reaction mixture was stirred for 30 minutes, warmed to 40° C., and then allowed to cool to ambient temperature. After this time the reaction mixture was poured into 500 mL of aqueous 10% ammonium chloride. The mixture was extracted with three 250 mL portions of diethyl ether, and the combined extracts were washed with two 250 mL portions of an aqueous solution saturated with ammonium chloride, one 250 mL portion of water, and one 250 mL portion of an aqueous solution saturated with sodium chloride. The organic layer was dried with magnesium sulfate and filtered. The filtrate was concentrated under reduced pressure, yielding 80.0 grams of ethyl N-(4-propoxyphenylmethyl)piperidin-4-ylcarboxylate. The NMR spectrum was consistent with the proposed structure. to rise to about 35° C Upon completion of the addition the reaction mixture to cool to ambient temperature The mixture was extracted with three 250 mL portions of diethyl ether the combined extracts were washed with two 250 mL portions of an aqueous solution saturated with ammonium chloride, one 250 mL portion of water, and one 250 mL portion of an aqueous solution saturated with sodium chloride The organic layer was dried with magnesium sulfate filtered The filtrate was concentrated under reduced pressure

Conditions: temp:40.01; pressure:0.00; stir:; See reaction.notes.procedure_details.

Procedure: To a stirred solution of 47.5 grams (0.30 mole) of ethyl piperidin-4-ylcarboxylate in 70 mL (0.40 mole) of N, N-diisopropylethylamine was added dropwise a solution of 52.5 grams (0.29 mole) of 4-propoxyphenylmethyl chloride in 50 mL of dimethyl sulfoxide. The reaction caused the reaction mixture temperature to rise to about 35° C. Upon completion of the addition the reaction mixture was stirred for 30 minutes, warmed to 40° C., and then allowed to cool to ambient temperature. After this time the reaction mixture was poured into 500 mL of aqueous 10% ammonium chloride. The mixture was extracted with three 250 mL portions of diethyl ether, and the combined extracts were washed with two 250 mL portions of an aqueous solution saturated with ammonium chloride, one 250 mL portion of water, and one 250 mL portion of an aqueous solution saturated with sodium chloride. The organic layer was dried with magnesium sulfate and filtered. The filtrate was concentrated under reduced pressure, yielding 80.0 grams of ethyl N-(4-propoxyphenylmethyl)piperidin-4-ylcarboxylate. The NMR spectrum was consistent with the proposed structure. to rise to about 35° C Upon completion of the addition the reaction mixture to cool to ambient temperature The mixture was extracted with three 250 mL portions of diethyl ether the combined extracts were washed with two 250 mL portions of an aqueous solution saturated with ammonium chloride, one 250 mL portion of water, and one 250 mL portion of an aqueous solution saturated with sodium chloride The organic layer was dried with magnesium sulfate filtered The filtrate was concentrated under reduced pressure