2-decylsulfanylethanamine;hydrochloride

Conditions: temp:100.01; pressure:0.00; stir:; See reaction.notes.procedure_details.

Procedure: After the hydrolysis in the above step is complete, the reactor is cooled to about 100° C. and approximately 2.0 equivalents of sodium hydroxide (217 lbs of 50 weight percent solution), based upon the hydrochloric acid added in the production of 2-(decylthio)ethanamine hydrochloride, are introduced with stirring in approximately 30 minutes. The reaction mixture is allowed to settle until phase separation is complete (approximately 30 minutes) and the 2-(decylthio)ethanamine is decanted off. The 2-(decylthio)ethanamine can be passed over a drying agent such as sodium sulfate, or may be vacuum stripped to remove any dissolved and/or entrained water. After the hydrolysis in the above step are introduced to settle until phase separation (approximately 30 minutes) the 2-(decylthio)ethanamine is decanted off to remove any dissolved

Conditions: temp:140.01; pressure:0.00; stir:; See reaction.notes.procedure_details.

Procedure: Approximately 225 pounds of decylmercaptan are loaded into a jacketed reactor equipped with an agitator. 1.25 pounds of zinc chloride catalyst are added through the manhole. The system is heated to approximately 140° C. and 130 pounds of 2-ethyl-2-oxazoline are added at the rate of 3 lbs/min in about 45 minutes. About 30 minutes are allowed for the reaction to be completed, the reactor cooled to approximately 120° C. and 155 pounds of 32 weight percent hydrochloric acid are then added to the reaction mixture. The reactor is heated to 150°-160° C., at which time the vapor pressure of the system is approximately 60 psi. The temperature is maintained near 150° C. for 2 hours to complete the hydrolysis. equipped with an agitator About 30 minutes are allowed for the reaction the reactor cooled to approximately 120° C. The reactor is heated to 150°-160° C., at which time the vapor pressure of the system The temperature is maintained near 150° C. for 2 hours the hydrolysis

Conditions: temp:100.01; pressure:0.00; stir:; See reaction.notes.procedure_details.

Procedure: After the hydrolysis in the above step is complete, the reactor is cooled to about 100° C. and approximately 2.0 equivalents of sodium hydroxide (217 lbs of 50 weight percent solution), based upon the hydrochloric acid added in the production of 2-(decylthio)ethanamine hydrochloride, are introduced with stirring in approximately 30 minutes. The reaction mixture is allowed to settle until phase separation is complete (approximately 30 minutes) and the 2-(decylthio)ethanamine is decanted off. The 2-(decylthio)ethanamine can be passed over a drying agent such as sodium sulfate, or may be vacuum stripped to remove any dissolved and/or entrained water. After the hydrolysis in the above step are introduced to settle until phase separation (approximately 30 minutes) the 2-(decylthio)ethanamine is decanted off to remove any dissolved

Conditions: temp:100.01; pressure:0.00; stir:; See reaction.notes.procedure_details.

Procedure: After the hydrolysis in the above step is complete, the reactor is cooled to about 100° C. and approximately 2.0 equivalents of sodium hydroxide (217 lbs of 50 weight percent solution), based upon the hydrochloric acid added in the production of 2-(decylthio)ethanamine hydrochloride, are introduced with stirring in approximately 30 minutes. The reaction mixture is allowed to settle until phase separation is complete (approximately 30 minutes) and the 2-(decylthio)ethanamine is decanted off. The 2-(decylthio)ethanamine can be passed over a drying agent such as sodium sulfate, or may be vacuum stripped to remove any dissolved and/or entrained water. After the hydrolysis in the above step are introduced to settle until phase separation (approximately 30 minutes) the 2-(decylthio)ethanamine is decanted off to remove any dissolved

Conditions: temp:140.01; pressure:0.00; stir:; See reaction.notes.procedure_details.

Procedure: Approximately 225 pounds of decylmercaptan are loaded into a jacketed reactor equipped with an agitator. 1.25 pounds of zinc chloride catalyst are added through the manhole. The system is heated to approximately 140° C. and 130 pounds of 2-ethyl-2-oxazoline are added at the rate of 3 lbs/min in about 45 minutes. About 30 minutes are allowed for the reaction to be completed, the reactor cooled to approximately 120° C. and 155 pounds of 32 weight percent hydrochloric acid are then added to the reaction mixture. The reactor is heated to 150°-160° C., at which time the vapor pressure of the system is approximately 60 psi. The temperature is maintained near 150° C. for 2 hours to complete the hydrolysis. equipped with an agitator About 30 minutes are allowed for the reaction the reactor cooled to approximately 120° C. The reactor is heated to 150°-160° C., at which time the vapor pressure of the system The temperature is maintained near 150° C. for 2 hours the hydrolysis

Conditions: temp:100.01; pressure:0.00; stir:; See reaction.notes.procedure_details.

Procedure: After the hydrolysis in the above step is complete, the reactor is cooled to about 100° C. and approximately 2.0 equivalents of sodium hydroxide (217 lbs of 50 weight percent solution), based upon the hydrochloric acid added in the production of 2-(decylthio)ethanamine hydrochloride, are introduced with stirring in approximately 30 minutes. The reaction mixture is allowed to settle until phase separation is complete (approximately 30 minutes) and the 2-(decylthio)ethanamine is decanted off. The 2-(decylthio)ethanamine can be passed over a drying agent such as sodium sulfate, or may be vacuum stripped to remove any dissolved and/or entrained water. After the hydrolysis in the above step are introduced to settle until phase separation (approximately 30 minutes) the 2-(decylthio)ethanamine is decanted off to remove any dissolved

Conditions: temp:140.01; pressure:0.00; stir:; See reaction.notes.procedure_details.

Procedure: Approximately 225 pounds of decylmercaptan are loaded into a jacketed reactor equipped with an agitator. 1.25 pounds of zinc chloride catalyst are added through the manhole. The system is heated to approximately 140° C. and 130 pounds of 2-ethyl-2-oxazoline are added at the rate of 3 lbs/min in about 45 minutes. About 30 minutes are allowed for the reaction to be completed, the reactor cooled to approximately 120° C. and 155 pounds of 32 weight percent hydrochloric acid are then added to the reaction mixture. The reactor is heated to 150°-160° C., at which time the vapor pressure of the system is approximately 60 psi. The temperature is maintained near 150° C. for 2 hours to complete the hydrolysis. equipped with an agitator About 30 minutes are allowed for the reaction the reactor cooled to approximately 120° C. The reactor is heated to 150°-160° C., at which time the vapor pressure of the system The temperature is maintained near 150° C. for 2 hours the hydrolysis

Conditions: temp:100.01; pressure:0.00; stir:; See reaction.notes.procedure_details.

Procedure: After the hydrolysis in the above step is complete, the reactor is cooled to about 100° C. and approximately 2.0 equivalents of sodium hydroxide (217 lbs of 50 weight percent solution), based upon the hydrochloric acid added in the production of 2-(decylthio)ethanamine hydrochloride, are introduced with stirring in approximately 30 minutes. The reaction mixture is allowed to settle until phase separation is complete (approximately 30 minutes) and the 2-(decylthio)ethanamine is decanted off. The 2-(decylthio)ethanamine can be passed over a drying agent such as sodium sulfate, or may be vacuum stripped to remove any dissolved and/or entrained water. After the hydrolysis in the above step are introduced to settle until phase separation (approximately 30 minutes) the 2-(decylthio)ethanamine is decanted off to remove any dissolved

Conditions: temp:140.01; pressure:0.00; stir:; See reaction.notes.procedure_details.

Procedure: Approximately 225 pounds of decylmercaptan are loaded into a jacketed reactor equipped with an agitator. 1.25 pounds of zinc chloride catalyst are added through the manhole. The system is heated to approximately 140° C. and 130 pounds of 2-ethyl-2-oxazoline are added at the rate of 3 lbs/min in about 45 minutes. About 30 minutes are allowed for the reaction to be completed, the reactor cooled to approximately 120° C. and 155 pounds of 32 weight percent hydrochloric acid are then added to the reaction mixture. The reactor is heated to 150°-160° C., at which time the vapor pressure of the system is approximately 60 psi. The temperature is maintained near 150° C. for 2 hours to complete the hydrolysis. equipped with an agitator About 30 minutes are allowed for the reaction the reactor cooled to approximately 120° C. The reactor is heated to 150°-160° C., at which time the vapor pressure of the system The temperature is maintained near 150° C. for 2 hours the hydrolysis