4-(2-methoxyethoxy)aniline

Conditions: temp:0.00; pressure:0.00; stir:

Conditions: temp:0.00; pressure:0.00; stir:

Conditions: temp:0.00; pressure:0.00; stir:

Conditions: temp:0.00; pressure:0.00; stir:; See reaction.notes.procedure_details.

Procedure: A mixture of 4-(6,7-dimethoxy-quinazolin-4-yl)-piperidine-1-carbonyl chloride (18 mg, 0.0536 mmol), as prepared in Example 3a, 4-(2-methoxy-ethoxy)-phenylamine (8.9 mg, 0.0533 mmol), as prepared in the previous step, and triethylamine (14 μL, 0.1 mmol) was stirred in DMSO (0.5 mL) at 50° C. overnight. The reaction was then cooled to RT, partitioned between EtOAc (10 mL) and H2O (10 mL). The organic phase was dried over Na2SO4 and concentrated in vacuo. Purification by prep tlc (1:9 MeOH/DCM) afforded the title compound as a brown solid (5.7 mg, 23%). 1H NMR (300 MHz, CDCl3) δ 9.16 (s, 1H), 7.28-7.25 (m, 4H), 6.89 (m, 2H), 6.33 (br s, NH), 4.29-4.24 (m, 2H), 4.12-4.07 (m, 8H), 3.74 (m, 2H), 3.59 (m, 1H), 3.45 (s, 3H), 3.17 (m, 2H), 2.22-2.08 (m, 2H), 2.05-1.97 (m, 2H); LC/MS (ESI): calcd mass 466.2, found 467.4 [M+1]+. partitioned between EtOAc (10 mL) and H2O (10 mL) The organic phase was dried over Na2SO4 concentrated in vacuo Purification by prep tlc (1:9 MeOH/DCM)

Conditions: temp:0.00; pressure:0.00; stir:; See reaction.notes.procedure_details.

Procedure: A mixture of 4-(6,7-dimethoxy-quinazolin-4-yl)-piperidine-1-carbonyl chloride (18 mg, 0.0536 mmol), as prepared in Example 3a, 4-(2-methoxy-ethoxy)-phenylamine (8.9 mg, 0.0533 mmol), as prepared in the previous step, and triethylamine (14 μL, 0.1 mmol) was stirred in DMSO (0.5 mL) at 50° C. overnight. The reaction was then cooled to RT, partitioned between EtOAc (10 mL) and H2O (10 mL). The organic phase was dried over Na2SO4 and concentrated in vacuo. Purification by prep tlc (1:9 MeOH/DCM) afforded the title compound as a brown solid (5.7 mg, 23%). 1H NMR (300 MHz, CDCl3) δ 9.16 (s, 1H), 7.28-7.25 (m, 4H), 6.89 (m, 2H), 6.33 (br s, NH), 4.29-4.24 (m, 2H), 4.12-4.07 (m, 8H), 3.74 (m, 2H), 3.59 (m, 1H), 3.45 (s, 3H), 3.17 (m, 2H), 2.22-2.08 (m, 2H), 2.05-1.97 (m, 2H); LC/MS (ESI): calcd mass 466.2, found 467.4 [M+1]+. partitioned between EtOAc (10 mL) and H2O (10 mL) The organic phase was dried over Na2SO4 concentrated in vacuo Purification by prep tlc (1:9 MeOH/DCM)

Conditions: temp:0.00; pressure:0.00; stir:; See reaction.notes.procedure_details.

Procedure: A mixture of 4-iodoaniline (219 mg, 1.0 mmol), 2-methoxyethanol (152 mg, 2.0 mmol), copper iodide (19.0 mg, 0.1 mmol), cesium carbonate (554 mg, 1.7 mmol) and 1,10-phenanthroline (36.0 mg, 0.2 mmol) was stirred in toluene (0.5 mL) at 110° C. overnight. The reaction was then cooled to RT and filtered through silica gel and washed with diethyl ether. The ether was removed in vacuo to obtain a crude solid. Purification by prep tlc (1:9 MeOH/DCM) afforded the title compound as a solid (8.9 mg, 5.3%). 1H NMR (300 MHz, CDCl3) δ 6.82-6.72 (m, 4H), 4.06 (t, 2H), 3.72 (t, 2H), 3.45 (s, 3H). filtered through silica gel washed with diethyl ether The ether was removed in vacuo to obtain a crude solid Purification by prep tlc (1:9 MeOH/DCM)

Conditions: temp:0.00; pressure:0.00; stir:

Conditions: temp:0.00; pressure:0.00; stir:

Conditions: temp:0.00; pressure:0.00; stir:

Conditions: temp:0.00; pressure:0.00; stir:; See reaction.notes.procedure_details.

Procedure: tert-Butyl (3-((2-chloro-5-fluoropyrimidin-4-yl)amino)phenyl)carbamate (800 mg, 2.37 mmoL) and 4-(2-methoxyethoxy)aniline (576 mg, 2.84 mmoL) were suspended in tert-amyl alcohol (14 mL) and acetic acid (5 drops). Heated to reflux for 4 h. After cooling, solvent was removed via rotary evaporation. The dark oil was partitioned between water/brine and THF (10 mL each), agitated, and separated layers and dried organic phase over sodium sulfate. The solvent was removed via rotary evaporation to afford a purple solid, 0.55 g. LC/MS (RT=2.997/(M+1)) 470.2. Additional 150 mg of product minus the (BOC) protecting group crystallized from the aqueous layer Heated to reflux for 4 h After cooling solvent was removed via rotary evaporation The dark oil was partitioned between water/brine and THF (10 mL each) separated layers and dried organic phase over sodium sulfate The solvent was removed via rotary evaporation to afford a purple solid, 0.55 g LC/MS (RT=2.997/(M+1)) 470.2 crystallized from the aqueous layer

Conditions: temp:80.01; pressure:0.00; stir:; See reaction.notes.procedure_details.

Procedure: In a 25 mL three neck RBF with thermometer pocket, a solution of tert-butyl (2-chloro-5-fluoropyrimidin-4-yl)(3-(N-hydroxyacrylamido)phenyl)carbamate (0.250 g) in 1,4-dioxane (8.0 mL) was added. 4-(2-Methoxyethoxy)aniline (0.122 g) was added and the reaction was degassed for 10 minutes under argon. After 10 minutes, Xantphose (0.0176 g) and Cs2CO3 (0.396 g) were added and again degassed the reaction for 10 minutes followed by addition of Pd (OAc)2 (0.003 g) under argon. The reaction was heated to 80° C. and stirred for 3.5 hr under argon. The reaction was monitored on TLC using hexane:ethyl acetate (2:8) as mobile phase. After completion of the reaction, the reaction mixture was allowed to cool at room temperature. The reaction mixture was poured into water and product was extracted with ethyl acetate (3×25 ml). Ethyl acetate layer washed with brine solution, dried over sodium sulfate and concentrated under reduced pressure to give 0.250 g of tert-butyl (5-fluoro-2-((4-(2-methoxyethoxy)phenyl)amino)pyrimidin-4-yl)(3-(N-hydroxyacrylamido)phenyl)carbamate. This crude material was used in the next step without any further purification. M+1=539.9. the reaction was degassed for 10 minutes under argon Xantphose (0.0176 g) and Cs2CO3 (0.396 g) were added again degassed the reaction for 10 minutes After completion of the reaction to cool at room temperature was extracted with ethyl acetate (3×25 ml) Ethyl acetate layer washed with brine solution dried over sodium sulfate concentrated under reduced pressure

Conditions: temp:80.01; pressure:0.00; stir:; See reaction.notes.procedure_details.

Procedure: In a 100 mL 3-neck RBF, N-(2-(benzyloxy)-5-nitrophenyl)-2-chloro-5-fluoropyrimidin-4-amine (0.205 g), 4-(2-methoxyethoxy)aniline (0.137 g), Cs2CO3 (0.266 g) and Xantphos (0.032 g) were taken in degassed 1,4-dioxane (8.0 mL) and reaction mixture was degassed under argon for 30 minutes. Palladium acetate (0.013 g) was added to reaction mixture and again it was degassed for 30 minutes. The reaction mixture was heated to 80° C. and stirred for 3.5 h. The reaction was monitored on TLC using hexane:ethyl acetate: (5:5) as mobile phase. After completion, the reaction mixture was allowed to cool at room temperature. The reaction mixture was poured into water and product was extracted with ethyl acetate (3×25 mL). The ethyl acetate layer washed with brine solution, dried over sodium sulfate and concentrated under reduced pressure. Crude material was purified by triturating with diethyl ether to give 0.1 g of N4-(2-(benzyloxy)-5-nitrophenyl)-5-fluoro-N2-(4-(2-methoxyethoxy)phenyl)pyrimidine-2,4-diamine. 1H NMR: CDCl3 (400 MHz): 3.47 (d, 3H, J=11.6), 3.77 (dd, 2H, J=4.8, 8.8), 4.15 (t, 2H, J=4.8), 5.28 (s, 2H), 6.96 (d, 1H, J=8.8), 7.03 (d, 1H, J=8.8), 7.08 (d, 1H, J=9.2), 7.45 (m, 7H), 7.83 (s, 1H), 7.9 (d, 2H, J=2.8), 8.02 (dd, 1H, J=2.1, 6.8), 9.18 (s, 1H). reaction mixture was degassed under argon for 30 minutes Palladium acetate (0.013 g) was added to reaction mixture and again it was degassed for 30 minutes to cool at room temperature The reaction mixture was poured into water and product was extracted with ethyl acetate (3×25 mL) The ethyl acetate layer washed with brine solution dried over sodium sulfate concentrated under reduced pressure Crude material was purified by triturating with diethyl ether