5-methylpiperidin-2-one

Conditions: temp:160.01; pressure:0.00; stir:; See reaction.notes.procedure_details.

Procedure: Into a 100 mL graduated cylinder was placed 54.4 mL of an aqueous reaction mixture containing 1.84M 4-cyanopentanoic acid ammonium salt (0.1 mole 4-cyanopentanoic acid ammonium salt, produced by the enzymatic hydrolysis of 2-methylglutaronitrile; Example 9, filtered product mixture from reaction #5), then 25.8 ml of 40 wt. % methylamine (9.31 g methylamine, 0.3 mole) was added and the final volume adjusted to 100 mL with distilled water. The final concentrations of 4-cyanopentanoic acid ammonium salt and methylamine were 1.0M and 3.0M, respectively. To the resulting solution was added 0.636 g (5 wt. %/wt. of 4-cyanopentanoic acid) of 5% Pd on carbon powder, and the resulting mixture charged to a 300-mL 314 SS Autoclave Engineers EZE-Seal stirred autoclave equipped with a Dispersimax® turbine-type impeller. After flushing the reactor with nitrogen, the contents of the reactor were stirred at 1000 rpm and heated at 160° C. under 500 psig of hydrogen gas for 4 h. Samples (ca. 1.5 mL) were removed via a sampling tube over the course of the reaction for analysis. After cooling to room temperature, analysis of the final reaction mixture by gas chromatography indicated a 72.8% yield of 1,5-dimethyl-2-piperidone, 3.5% 5-methyl-2-piperidone, 19.9% 2-methylglutaric acid, and no 4-cyanopentanoic acid ammonium salt remaining. Example 9, filtered product mixture was added equipped with a Dispersimax® turbine-type impeller After flushing the reactor with nitrogen the contents of the reactor were stirred at 1000 rpm Samples (ca. 1.5 mL) were removed via a sampling tube over the course of the reaction for analysis After cooling to room temperature analysis of the final reaction mixture by gas chromatography

Conditions: temp:160.01; pressure:0.00; stir:; See reaction.notes.procedure_details.

Procedure: Into a 100 mL graduated cylinder was placed 54.4 mL of an aqueous reaction mixture containing 1.84 M 4-cyanopentanoic acid ammonium salt (0.1 mole 4-cyanopentanoic acid ammonium salt, produced by the enzymatic hydrolysis of 2-methylglutaronitrile; Example 9, filtered product mixture from reaction #5), then 25.8 ml of 40 wt. % methylamine (9.31 g methylamine, 0.3 mole) was added and the final volume adjusted to 100 mL with distilled water. The final concentrations of 4-cyanopentanoic acid ammonium salt and methylamine were 1.0 M and 3.0 M, respectively. To the resulting solution was added 0.636 g (5 wt. %/wt. of 4-cyanopentanoic acid) of 5% Pd on carbon powder, and the resulting mixture charged to a 300-mL 314 SS Autoclave Engineers EZE-Seal stirred autoclave equipped with a Dispersimax® turbine-type impeller. After flushing the reactor with nitrogen, the contents of the reactor were stirred at 1000 rpm and heated at 160° C. under 500 psig of hydrogen gas for 4 h. Samples (ca. 1.5 mL) were removed via a sampling tube over the course of the reaction for analysis. After cooling to room temperature, analysis of the final reaction mixture by gas chromatography indicated a 72.8% yield of 1,5-dimethyl-2-piperidone, 3.5% 5-methyl-2-piperidone, 19.9% 2-methylglutaric acid, and no 4-cyanopentanoic acid ammonium salt remaining. Example 9, filtered product mixture was added equipped with a Dispersimax® turbine-type impeller After flushing the reactor with nitrogen the contents of the reactor were stirred at 1000 rpm Samples (ca. 1.5 mL) were removed via a sampling tube over the course of the reaction for analysis After cooling to room temperature analysis of the final reaction mixture by gas chromatography

Conditions: temp:160.01; pressure:0.00; stir:; See reaction.notes.procedure_details.

Procedure: Into a 100 mL graduated cylinder was placed 54.4 mL of an aqueous reaction mixture containing 1.84 M 4-cyanopentanoic acid ammonium salt (0.1 mole 4-cyanopentanoic acid ammonium salt, produced by the enzymatic hydrolysis of 2-methylglutaronitrile; Example 9, filtered product mixture from reaction #5), then 25.8 ml of 40 wt. % methylamine (9.31 g methylamine, 0.3 mole) was added and the final volume adjusted to 100 mL with distilled water. The final concentrations of 4-cyanopentanoic acid ammonium salt and methylamine were 1.0M and 3.0M, respectively. To the resulting solution was added 0.636 g (5 wt. %/wt. of 4-cyanopentanoic acid) of 5% Pd on carbon powder, and the resulting mixture charged to a 300-mL 314 SS Autoclave Engineers EZE-Seal stirred autoclave equipped with a Dispersimax® turbine-type impeller. After flushing the reactor with nitrogen, the contents of the. reactor were stirred at 1000 rpm and heated at 160° C. under 500 psig of hydrogen gas for 4 h. Samples (ca. 1.5 mL) were removed via a sampling tube over the course of the reaction for analysis. After cooling to room temperature, analysis of the final reaction mixture by gas chromatography indicated a 72.8% yield of 1,5-dimethyl-2-piperidone, 3.5% 5-methyl-2-piperidone, 19.9% 2-methylglutaric acid, and no 4-cyanopentanoic acid ammonium salt remaining. Example 9, filtered product mixture was added equipped with a Dispersimax® turbine-type impeller After flushing the reactor with nitrogen reactor were stirred at 1000 rpm Samples (ca. 1.5 mL) were removed via a sampling tube over the course of the reaction for analysis After cooling to room temperature analysis of the final reaction mixture by gas chromatography

Conditions: temp:160.01; pressure:0.00; stir:; See reaction.notes.procedure_details.

Procedure: Into a 100 mL graduated cylinder was placed 54.4 mL of an aqueous reaction mixture containing 1.84M 4-cyanopentanoic acid ammonium salt (0.1 mole 4-cyanopentanoic acid ammonium salt, produced by the enzymatic hydrolysis of 2-methylglutaronitrile; Example 9, filtered product mixture from reaction #5), then 25.8 ml of 40 wt. % methylamine (9.31 g methylamine, 0.3 mole) was added and the final volume adjusted to 100 mL with distilled water. The final concentrations of 4-cyanopentanoic acid ammonium salt and methylamine were 1.0M and 3.0M, respectively. To the resulting solution was added 0.636 g (5 wt. %/wt. of 4-cyanopentanoic acid) of 5% Pd on carbon powder, and the resulting mixture charged to a 300-mL 314 SS Autoclave Engineers EZE-Seal stirred autoclave equipped with a Dispersimax® turbine-type impeller. After flushing the reactor with nitrogen, the contents of the reactor were stirred at 1000 rpm and heated at 160° C. under 500 psig of hydrogen gas for 4 h. Samples (ca. 1.5 mL) were removed via a sampling tube over the course of the reaction for analysis. After cooling to room temperature, analysis of the final reaction mixture by gas chromatography indicated a 72.8% yield of 1,5-dimethyl-2-piperidone, 3.5% 5-methyl-2-piperidone, 19.9% 2-methylglutaric acid, and no 4-cyanopentanoic acid ammonium salt remaining. Example 9, filtered product mixture was added equipped with a Dispersimax® turbine-type impeller After flushing the reactor with nitrogen the contents of the reactor were stirred at 1000 rpm Samples (ca. 1.5 mL) were removed via a sampling tube over the course of the reaction for analysis After cooling to room temperature analysis of the final reaction mixture by gas chromatography

Conditions: temp:160.01; pressure:0.00; stir:; See reaction.notes.procedure_details.

Procedure: Into a 100 mL graduated cylinder was placed 54.4 mL of an aqueous reaction mixture containing 1.84M 4-cyanopentanoic acid ammonium salt (0.1 mole 4-cyanopentanoic acid ammonium salt, produced by the enzymatic hydrolysis of 2-methylglutaronitrile; Example 9, filtered product mixture from reaction #5), then 25.8 ml of 40 wt. % methylamine (9.31 g methylamine, 0.3 mole) was added and the final volume adjusted to 100 mL with distilled water. The final concentrations of 4-cyanopentanoic acid ammonium salt and methylamine were 1.0M and 3.0M, respectively. To the resulting solution was added 0.636 g (5 wt. %/wt. of 4-cyanopentanoic acid) of 5% Pd on carbon powder, and the resulting mixture charged to a 300-mL 314 SS Autoclave Engineers EZE-Seal stirred autoclave equipped with a Dispersimax® turbine-type impeller. After flushing the reactor with nitrogen, the contents of the reactor were stirred at 1000 rpm and heated at 160° C. under 500 psig of hydrogen gas for 4 h. Samples (ca. 1.5 mL) were removed via a sampling tube over the course of the reaction for analysis. After cooling to room temperature, analysis of the final reaction mixture by gas chromatography indicated a 72.8% yield of 1,5-dimethyl-2-piperidone, 3.5% 5-methyl-2-piperidone, 19.9% 2-methylglutaric acid, and no 4-cyanopentanoic acid ammonium salt remaining. Example 9, filtered product mixture was added equipped with a Dispersimax® turbine-type impeller After flushing the reactor with nitrogen the contents of the reactor were stirred at 1000 rpm Samples (ca. 1.5 mL) were removed via a sampling tube over the course of the reaction for analysis After cooling to room temperature analysis of the final reaction mixture by gas chromatography

Conditions: temp:0.00; pressure:0.00; stir:; See reaction.notes.procedure_details.

Procedure: Into a 100 mL graduated cylinder was placed 54.4 mL of an aqueous reaction mixture containing 1.84M 4-cyanopentanoic acid ammonium salt (0.1 mole 4-cyanopentanoic acid ammonium salt, produced by the enzymatic hydrolysis of 2-methylglutaronitrile; Example 9, filtered product mixture from reaction #5), then 25.8 ml of 40 wt. % methylamine (9.31 g methylamine, 0.3 mole) was added and the final volume adjusted to 100 mL with distilled water. The final concentrations of 4-cyanopentanoic acid ammonium salt and methylamine were 1.0M and 3.0M, respectively. To the resulting solution was added 0.636 g (5 wt. %/wt. of 4-cyanopentanoic acid) of 5% Pd on carbon powder, and the resulting mixture charged to a 300-mL 314 SS Autoclave Engineers EZE-Seal stirred autoclave equipped with a Dispersimax® turbine-type impeller. After flushing the reactor with nitrogen, the contents of the reactor were stirred at 1000 rpm and heater at 160° C. under 500 psig of hydrogen gas for 4 h. Samples (ca. 1.5 mL) were removed via a sampling tube over the course of the reaction for analysis. After cooling to room temperature, analysis of the final reaction mixture by gas chromatography indicated a 72.8% yield of 1,5-dimethyl-2-piperidone, 3.5% 5-methyl-2-piperidone, 19.9% 2-methylglutaric acid, and no 4-cyanopentanoic acid ammonium salt remaining. Example 9, filtered product mixture was added equipped with a Dispersimax® turbine-type impeller After flushing the reactor with nitrogen the contents of the reactor were stirred at 1000 rpm and heater at 160° C. under 500 psig of hydrogen gas for 4 h Samples (ca. 1.5 mL) were removed via a sampling tube over the course of the reaction for analysis analysis of the final reaction mixture by gas chromatography

Conditions: temp:0.00; pressure:0.00; stir:; See reaction.notes.procedure_details.

Procedure: Into a 100 mL graduated cylinder was placed 54.4 mL of an aqueous reaction mixture containing 1.84M 4-cyanopentanoic acid ammonium salt (0.1 mole 4-cyanopentanoic acid ammonium salt, produced by the enzymatic hydrolysis of 2-methylglutaronitrile; Example 9, filtered product mixture from reaction #5), then 25.8 ml of 40 wt. % methylamine (9.31 g methylamine, 0.3 mole) was added and the final volume adjusted to 100 mL with distilled water. The final concentrations of 4-cyanopentanoic acid ammonium salt and methylamine were 1.0M and 3.0M, respectively. To the resulting solution was added 0.636 g (5 wt. %/wt. of 4-cyanopentanoic acid) of 5% Pd on carbon powder, and the resulting mixture charged to a 300-mL 314 SS Autoclave Engineers EZE-Seal stirred autoclave equipped with a Dispersimax® turbine-type impeller. After flushing the reactor with nitrogen, the contents of the reactor were stirred at 1000 rpm and heater at 160° C. under 500 psig of hydrogen gas for 4 h. Samples (ca. 1.5 mL) were removed via a sampling tube over the course of the reaction for analysis. After cooling to room temperature, analysis of the final reaction mixture by gas chromatography indicated a 72.8% yield of 1,5-dimethyl-2-piperidone, 3.5% 5-methyl-2-piperidone, 19.9% 2-methylglutaric acid, and no 4-cyanopentanoic acid ammonium salt remaining. Example 9, filtered product mixture was added equipped with a Dispersimax® turbine-type impeller After flushing the reactor with nitrogen the contents of the reactor were stirred at 1000 rpm and heater at 160° C. under 500 psig of hydrogen gas for 4 h Samples (ca. 1.5 mL) were removed via a sampling tube over the course of the reaction for analysis analysis of the final reaction mixture by gas chromatography

Conditions: temp:160.01; pressure:0.00; stir:; See reaction.notes.procedure_details.

Procedure: Into a 100 mL graduated cylinder was placed 54.4 mL of an aqueous reaction mixture containing 1.84M 4-cyanopentanoic acid ammonium salt (0.1 mole 4-cyanopentanoic acid ammonium salt, produced by the enzymatic hydrolysis of 2-methylglutaronitrile; Example 9, filtered product mixture from reaction #5), then 25.8 ml of 40 wt. % methylamine (9.31 g methylamine, 0.3 mole) was added and the final volume adjusted to 100 mL with distilled water. The final concentrations of 4-cyanopentanoic acid ammonium salt and methylamine were 1.0M and 3.0M, respectively. To the resulting solution was added 0.636 g (5 wt. %/wt. of 4-cyanopentanoic acid) of 5% Pd on carbon powder, and the resulting mixture charged to a 300-mL 314 SS Autoclave Engineers EZE-Seal stirred autoclave equipped with a Dispersimax® turbine-type impeller. After flushing the reactor with nitrogen, the contents of the reactor were stirred at 1000 rpm and heated at 160° C. under 500 psig of hydrogen gas for 4 h. Samples (ca. 1.5 mL) were removed via a sampling tube over the course of the reaction for analysis. After cooling to room temperature, analysis of the final reaction mixture by gas chromatography indicated a 72.8% yield of 1,5-dimethyl-2-piperidone, 3.5% 5-methyl-2-piperidone, 19.9% 2-methylglutaric acid, and no 4-cyanopentanoic acid ammonium salt remaining. Example 9, filtered product mixture was added equipped with a Dispersimax® turbine-type impeller After flushing the reactor with nitrogen the contents of the reactor were stirred at 1000 rpm Samples (ca. 1.5 mL) were removed via a sampling tube over the course of the reaction for analysis After cooling to room temperature analysis of the final reaction mixture by gas chromatography

Conditions: temp:160.01; pressure:0.00; stir:; See reaction.notes.procedure_details.

Procedure: Into a 100 mL graduated cylinder was placed 54.4 mL of an aqueous reaction mixture containing 1.84 M 4-cyanopentanoic acid ammonium salt (0.1 mole 4-cyanopentanoic acid ammonium salt, produced by the enzymatic hydrolysis of 2-methylglutaronitrile; Example 9, filtered product mixture from reaction #5), then 25.8 ml of 40 wt. % methylamine (9.31 g methylamine, 0.3 mole) was added and the final volume adjusted to 100 mL with distilled water. The final concentrations of 4-cyanopentanoic acid ammonium salt and methylamine were 1.0 M and 3.0 M, respectively. To the resulting solution was added 0.636 g (5 wt. %/wt. of 4-cyanopentanoic acid) of 5% Pd on carbon powder, and the resulting mixture charged to a 300-mL 314 SS Autoclave Engineers EZE-Seal stirred autoclave equipped with a Dispersimax® turbine-type impeller. After flushing the reactor with nitrogen, the contents of the reactor were stirred at 1000 rpm and heated at 160° C. under 500 psig of hydrogen gas for 4 h. Samples (ca. 1.5 mL) were removed via a sampling tube over the course of the reaction for analysis. After cooling to room temperature, analysis of the final reaction mixture by gas chromatography indicated a 72.8% yield of 1,5-dimethyl-2-piperidone, 3.5% 5-methyl-2-piperidone, 19.9% 2-methylglutaric acid, and no 4-cyanopentanoic acid ammonium salt remaining. Example 9, filtered product mixture was added equipped with a Dispersimax® turbine-type impeller After flushing the reactor with nitrogen the contents of the reactor were stirred at 1000 rpm Samples (ca. 1.5 mL) were removed via a sampling tube over the course of the reaction for analysis After cooling to room temperature analysis of the final reaction mixture by gas chromatography

Conditions: temp:160.01; pressure:0.00; stir:; See reaction.notes.procedure_details.

Procedure: Into a 100 mL graduated cylinder was placed 54.4 mL of an aqueous reaction mixture containing 1.84M 4-cyanopentanoic acid ammonium salt (0.1 mole 4-cyanopentanoic acid ammonium salt, produced by the enzymatic hydrolysis of 2-methylglutaronitrile; Example 9, filtered product mixture from reaction #5), then 25.8 ml of 40 wt. % methylamine (9.31 g methylamine, 0.3 mole) was added and the final volume adjusted to 100 mL with distilled water. The final concentrations of 4-cyanopentanoic acid ammonium salt and methylamine were 1.0M and 3.0M, respectively. To the resulting solution was added 0.636 g (5 wt. %/wt. of 4-cyanopentanoic acid) of 5% Pd on carbon powder, and the resulting mixture charged to a 300-mL 314 SS Autoclave Engineers EZE-Seal stirred autoclave equipped with a Dispersimax® turbine-type impeller. After flushing the reactor with nitrogen, the contents of the reactor were stirred at 1000 rpm and heated at 160° C. under 500 psig of hydrogen gas for 4 h. Samples (ca. 1.5 mL) were removed via a sampling tube over the course of the reaction for analysis. After cooling to room temperature, analysis of the final reaction mixture by gas chromatography indicated a 72.8% yield of 1,5-dimethyl-2-piperidone, 3.5% 5-methyl-2-piperidone, 19.9% 2-methylglutaric acid, and no 4-cyanopentanoic acid ammonium salt remaining. Example 9, filtered product mixture was added equipped with a Dispersimax® turbine-type impeller After flushing the reactor with nitrogen the contents of the reactor were stirred at 1000 rpm Samples (ca. 1.5 mL) were removed via a sampling tube over the course of the reaction for analysis After cooling to room temperature analysis of the final reaction mixture by gas chromatography

Conditions: temp:160.01; pressure:0.00; stir:; See reaction.notes.procedure_details.

Procedure: Into a 100 mL graduated cylinder was placed 54.4 mL of an aqueous reaction mixture containing 1.84 M 4-cyanopentanoic acid ammonium salt (0.1 mole 4-cyanopentanoic acid ammonium salt, produced by the enzymatic hydrolysis of 2-methylglutaronitrile; Example 9, filtered product mixture from reaction #5), then 25.8 ml of 40 wt. % methylamine (9.31 g methylamine, 0.3 mole) was added and the final volume adjusted to 100 mL with distilled water. The final concentrations of 4-cyanopentanoic acid ammonium salt and methylamine were 1.0 M and 3.0 M, respectively. To the resulting solution was added 0.636 g (5 wt. %/wt. of 4-cyanopentanoic acid) of 5% Pd on carbon powder, and the resulting mixture charged to a 300-mL 314 SS Autoclave Engineers EZE-Seal stirred autoclave equipped with a Dispersimax® turbine-type impeller. After flushing the reactor with nitrogen, the contents of the reactor were stirred at 1000 rpm and heated at 160° C. under 500 psig of hydrogen gas for 4 h. Samples (ca. 1.5 mL) were removed via a sampling tube over the course of the reaction for analysis. After cooling to room temperature, analysis of the final reaction mixture by gas chromatography indicated a 72.8% yield of 1,5-dimethyl-2-piperidone, 3.5% 5-methyl-2-piperidone, 19.9% 2-methylglutaric acid, and no 4-cyanopentanoic acid ammonium salt remaining. Example 9, filtered product mixture was added equipped with a Dispersimax® turbine-type impeller After flushing the reactor with nitrogen the contents of the reactor were stirred at 1000 rpm Samples (ca. 1.5 mL) were removed via a sampling tube over the course of the reaction for analysis After cooling to room temperature analysis of the final reaction mixture by gas chromatography

Conditions: temp:160.01; pressure:0.00; stir:; See reaction.notes.procedure_details.

Procedure: Into a 100 mL graduated cylinder was placed 54.4 mL of an aqueous reaction mixture containing 1.84 M 4-cyanopentanoic acid ammonium salt (0.1 mole 4-cyanopentanoic acid ammonium salt, produced by the enzymatic hydrolysis of 2-methylglutaronitrile; Example 9, filtered product mixture from reaction #5), then 25.8 ml of 40 wt. % methylamine (9.31 g methylamine, 0.3 mole) was added and the final volume adjusted to 100 mL with distilled water. The final concentrations of 4-cyanopentanoic acid ammonium salt and methylamine were 1.0M and 3.0M, respectively. To the resulting solution was added 0.636 g (5 wt. %/wt. of 4-cyanopentanoic acid) of 5% Pd on carbon powder, and the resulting mixture charged to a 300-mL 314 SS Autoclave Engineers EZE-Seal stirred autoclave equipped with a Dispersimax® turbine-type impeller. After flushing the reactor with nitrogen, the contents of the. reactor were stirred at 1000 rpm and heated at 160° C. under 500 psig of hydrogen gas for 4 h. Samples (ca. 1.5 mL) were removed via a sampling tube over the course of the reaction for analysis. After cooling to room temperature, analysis of the final reaction mixture by gas chromatography indicated a 72.8% yield of 1,5-dimethyl-2-piperidone, 3.5% 5-methyl-2-piperidone, 19.9% 2-methylglutaric acid, and no 4-cyanopentanoic acid ammonium salt remaining. Example 9, filtered product mixture was added equipped with a Dispersimax® turbine-type impeller After flushing the reactor with nitrogen reactor were stirred at 1000 rpm Samples (ca. 1.5 mL) were removed via a sampling tube over the course of the reaction for analysis After cooling to room temperature analysis of the final reaction mixture by gas chromatography