4-ethyl-1,2,3,4-tetrahydroquinoline

Conditions: temp:-10.01; pressure:0.00; stir:; See reaction.notes.procedure_details.

Procedure: A 25-mL rb flask containing (R/S)-4-ethyl-1,2,3,4-tetrahydroquinoline (340 mg, 2.1 mmol) was cooled to -10° C., and conc. H2SO4 (5 mL) was added slowly. The resulting solution was warmed to rt to effect complete dissolution of the quinoline, then cooled again to -10° C. and stirred vigorously. Fuming HNO3 (85 μL) was added dropwise, slowly, and the reaction mixture turned dark red. After 10 min, the reaction mixture was poured onto cracked ice and diluted with water (5 mL). Sat'd NaHCO3 (80 mL) was added, and the pH was adjusted to pH 9 with 3.0 M NaOH. This aqueous phase was extracted with EtOAc (3×75 mL), and the combined extracts were dried (Na2SO4), and concentrated under reduced pressure to yield a dark red oil. This crude material was placed into a 250-mL rb flask with 1:1 EtOAc/EtOH (40 mL) and 10% Pd on C (approx. 1 mol %). The vessel was evacuated and flushed with nitrogen three times, then stirred under an atmosphere of hydrogen for 16 h, filtered, and concentrated under reduced pressure to yield a yellow oil, which was purified by flash chromatography (silica gel, CH2Cl2 /methanol, 9:1), affording 210 mg (57%) of the desired product as a dark yellow oil (Rf 0.50, CH2Cl2 /MeOH, 9:1). Data for (R/S)-7-amino-4-ethyl-1,2,3,4-tetrahydroquinoline: 1H NMR (400 MHz, CDCl3) δ 6.81 (d, 1H, J=8.1, 5-H), 6.02 (dd, 1H, J=8.0, 2.2, 6-H), 5.84 (d, 1H, J=2.3, 8-H), 3.48 (s, 2H, NH2), 3.27 (ddd, 1H, J=11.1, 11.1, 3.5, 2-H), 3.20 (ddd, 1H, J=9.8, 5.3, 4.5, 2-H), 2.55 (dddd, 1H, J=10.2, 5.2, 5.2, 5.2, 4H), 1.90 (dddd, 1H, J=9.6, 9.6, 9.6, 4.7, 3-H), 1.72 (m, 2H, 3-H, CH2CH3), 1.48 (m, 1H, CH2CH3), 0.96 (t, 3H, J=7.4, CH3). The resulting solution was warmed to rt cooled again to -10° C. the reaction mixture was poured This aqueous phase was extracted with EtOAc (3×75 mL) the combined extracts were dried (Na2SO4) concentrated under reduced pressure to yield a dark red oil The vessel was evacuated flushed with nitrogen three times stirred under an atmosphere of hydrogen for 16 h filtered concentrated under reduced pressure to yield a yellow oil, which was purified by flash chromatography (silica gel, CH2Cl2 /methanol, 9:1)

Conditions: temp:0.00; pressure:0.00; stir:; See reaction.notes.procedure_details.

Procedure: This compound was prepared from 1-tert-butyloxycarbonyl-1,2,3,4-tetrahydro-4-hydroxy-4-propylquinoline (550 mg, 1.89 mmol) in the manner previously described for 4-ethyl-1,2,3,4-tetrahydroquinoline (EXAMPLE 345), affording 229 mg (66%) of the desired tetrahydroquinoline as a yellow oil (Rf 0.10, hexanes/EtOAc, 2:1). Data for (R/S)-1,2,3,4-tetrahydro-4-propylquinoline: 1H NMR (400 MHz, CDCl3) 7.07 (d, 1H, J=7.6, 5-H), 7.02 (ddd, 1H, J=7.9, 7.9, 1.1, 7-H), 6.77 (dd, 1H, J=7.5, 7.4, 6-H), 6.67 (d, 1H, J=7.9, 8-H), 6.25 (br s, 1H, NH), 3.37 (ddd, 1H, J=11.5, 11.5, 3.5, 2-H), 3.30 (m, 1H, 2-H), 2.78 (dddd, 1H, J=10.0, 5.0, 5.0, 5.0, 4-H), 1.99 and 1.84 (2×m, 2×1H, 3-H), 1.68 (m, 1H, CH2CH2 CH3), 1.47 (m, 3H, CH2CH2CH3), 0.95 (t, 3H, J=7.3, CH3).

Conditions: temp:-10.01; pressure:0.00; stir:; See reaction.notes.procedure_details.

Procedure: A 25-mL rb flask containing (R/S)-4-ethyl-1,2,3,4-tetrahydroquinoline (340 mg, 2.1 mmol) was cooled to -10° C., and conc. H2SO4 (5 mL) was added slowly. The resulting solution was warmed to rt to effect complete dissolution of the quinoline, then cooled again to -10° C. and stirred vigorously. Fuming HNO3 (85 μL) was added dropwise, slowly, and the reaction mixture turned dark red. After 10 min, the reaction mixture was poured onto cracked ice and diluted with water (5 mL). Sat'd NaHCO3 (80 mL) was added, and the pH was adjusted to pH 9 with 3.0M NaOH. This aqueous phase was extracted with EtOAc (3×75 mL), and the combined extracts were dried (Na2SO4), and concentrated under reduced pressure to yield a dark red oil. This crude material was placed into a 250-mL rb flask with 1:1 EtOAc/EtOH (40 mL) and 10% Pd on C (approx. 1 mol %). The vessel was evacuated and flushed with nitrogen three times, then stirred under an atmosphere of hydrogen for 16 h, filtered, and concentrated under reduced pressure to yield a yellow oil, which was purified by flash chromatography (silica gel, CH2 Cl2 /methanol, 9:1), affording 210 mg (57%) of the desired product as a dark yellow oil (Rf 0.50, CH2Cl2 /MeOH, 9:1). Data for (R/S)-7-amino-4-ethyl-1,2,3,4-tetrahydroquinoline: 1H NMR (400 MHz, CDCl3) 6.81 (d, 1H, J=8.1,5-H), 6.02 (dd, 1H, J=8.0, 2.2, 6-H), 5.84 (d, 1H, J=2.3, 8-H), 3.48 (s, 2H, NH2), 3.27 (ddd, 1H, J=11.1, 11.1, 3.5, 2-H), 3.20 (ddd, 1H, J=9.8, 5.3, 4.5, 2-H), 2.55 (dddd, 1H, J=10.2, 5.2, 5.2, 5.2, 4H), 1.90 (dddd, 1H, J=9.6, 9.6, 9.6, 4.7, 3-H), 1.72 (m, 2H, 3-H, CH2CH3), 1.48 (m, 1H, CH2CH3), 0.96 (t, 3H, J=7.4, CH3). The resulting solution was warmed to rt cooled again to -10° C. the reaction mixture was poured This aqueous phase was extracted with EtOAc (3×75 mL) the combined extracts were dried (Na2SO4) concentrated under reduced pressure to yield a dark red oil The vessel was evacuated flushed with nitrogen three times stirred under an atmosphere of hydrogen for 16 h filtered concentrated under reduced pressure to yield a yellow oil, which was purified by flash chromatography (silica gel, CH2 Cl2 /methanol, 9:1)

Conditions: temp:-10.01; pressure:0.00; stir:; See reaction.notes.procedure_details.

Procedure: A 25-mL rb flask containing (R/S)-4-ethyl-1,2,3,4-tetrahydroquinoline (340 mg, 2.1 mmol) was cooled to -10° C., and conc. H2SO4 (5 mL) was added slowly. The resulting solution was warmed to rt to effect complete dissolution of the quinoline, then cooled again to -10° C. and stirred vigorously. Fuming HNO3 (85 μL) was added dropwise, slowly, and the reaction mixture turned dark red. After 10 min, the reaction mixture was poured onto cracked ice and diluted with water (5 mL). Sat'd NaHCO3 (80 mL) was added, and the pH was adjusted to pH 9 with 3.0M NaOH. This aqueous phase was extracted with EtOAc (3×75 mL), and the combined extracts were dried (Na2SO4), and concentrated under reduced pressure to yield a dark red oil. This crude material was placed into a 250-mL rb flask with 1:1 EtOAc/EtOH (40 mL) and 10% Pd on C (approx. 1 mol %). The vessel was evacuated and flushed with nitrogen three times, then stirred under an atmosphere of hydrogen for 16 h, filtered, and concentrated under reduced pressure to yield a yellow oil, which was purified by flash chromatography (silica gel, CH2 Cl2 /methanol, 9:1), affording 210 mg (57%) of the desired product as a dark yellow oil (Rf 0.50, CH2Cl2 /MeOH, 9:1). Data for (R/S)-7-amino-4-ethyl-1,2,3,4-tetrahydroquinoline: 1H NMR (400 MHz, CDCl3) 6.81 (d, 1H, J=8.1,5-H), 6.02 (dd, 1H, J=8.0, 2.2, 6-H), 5.84 (d, 1H, J=2.3, 8-H), 3.48 (s, 2H, NH2), 3.27 (ddd, 1H, J=11.1, 11.1, 3.5, 2-H), 3.20 (ddd, 1H, J=9.8, 5.3, 4.5, 2-H), 2.55 (dddd, 1H, J=10.2, 5.2, 5.2, 5.2, 4H), 1.90 (dddd, 1H, J=9.6, 9.6, 9.6, 4.7, 3-H), 1.72 (m, 2H, 3-H, CH2CH3), 1.48 (m, 1H, CH2CH3), 0.96 (t, 3H, J=7.4, CH3). The resulting solution was warmed to rt cooled again to -10° C. the reaction mixture was poured This aqueous phase was extracted with EtOAc (3×75 mL) the combined extracts were dried (Na2SO4) concentrated under reduced pressure to yield a dark red oil The vessel was evacuated flushed with nitrogen three times stirred under an atmosphere of hydrogen for 16 h filtered concentrated under reduced pressure to yield a yellow oil, which was purified by flash chromatography (silica gel, CH2 Cl2 /methanol, 9:1)

Conditions: temp:-10.01; pressure:0.00; stir:; See reaction.notes.procedure_details.

Procedure: A 25-mL rb flask containing (R/S)-4-ethyl-1,2,3,4-tetrahydroquinoline (340 mg, 2.1 mmol) was cooled to -10° C., and conc. H2SO4 (5 mL) was added slowly. The resulting solution was warmed to rt to effect complete dissolution of the quinoline, then cooled again to -10° C. and stirred vigorously. Fuming HNO3 (85 μL) was added dropwise, slowly, and the reaction mixture turned dark red. After 10 min, the reaction mixture was poured onto cracked ice and diluted with water (5 mL). Sat'd NaHCO3 (80 mL) was added, and the pH was adjusted to pH 9 with 3.0M NaOH. This aqueous phase was extracted with EtOAc (3×75 mL), and the combined extracts were dried (Na2SO4), and concentrated under reduced pressure to yield a dark red oil. This crude material was placed into a 250-mL rb flask with 1:1 EtOAc/EtOH (40 mL) and 10% Pd on C (approx. 1 mol %). The vessel was evacuated and flushed with nitrogen three times, then stirred under an atmosphere of hydrogen for 16 h, filtered, and concentrated under reduced pressure to yield a yellow oil, which was purified by flash chromatography (silica gel, CH2 Cl2 /methanol, 9:1), affording 210 mg (57%) of the desired product as a dark yellow oil (Rf 0.50, CH2Cl2 /MeOH, 9:1). Data for (R/S)-7-amino-4-ethyl-1,2,3,4-tetrahydroquinoline: 1H NMR (400 MHz, CDCl3) 6.81 (d, 1H, J=8.1,5-H), 6.02 (dd, 1H, J=8.0, 2.2, 6-H), 5.84 (d, 1H, J=2.3, 8-H), 3.48 (s, 2H, NH2), 3.27 (ddd, 1H, J=11.1, 11.1, 3.5, 2-H), 3.20 (ddd, 1H, J=9.8, 5.3, 4.5, 2-H), 2.55 (dddd, 1H, J=10.2, 5.2, 5.2, 5.2, 4H), 1.90 (dddd, 1H, J=9.6, 9.6, 9.6, 4.7, 3-H), 1.72 (m, 2H, 3-H, CH2CH3), 1.48 (m, 1H, CH2CH3), 0.96 (t, 3H, J=7.4, CH3). The resulting solution was warmed to rt cooled again to -10° C. the reaction mixture was poured This aqueous phase was extracted with EtOAc (3×75 mL) the combined extracts were dried (Na2SO4) concentrated under reduced pressure to yield a dark red oil The vessel was evacuated flushed with nitrogen three times stirred under an atmosphere of hydrogen for 16 h filtered concentrated under reduced pressure to yield a yellow oil, which was purified by flash chromatography (silica gel, CH2 Cl2 /methanol, 9:1)

Conditions: temp:0.00; pressure:0.00; stir:; See reaction.notes.procedure_details.

Procedure: This compound was prepared from 1-tert-butyloxycarbonyl-1,2,3,4-tetrahydro-4-hydroxy-4-propylquinoline (550 mg, 1.89 mmol) in the manner previously described for 4-ethyl-1,2,3,4-tetrahydroquinoline (EXAMPLE 345), affording 229 mg (66%) of the desired tetrahydroquinoline as a yellow oil (Rf 0.10, hexanes/EtOAc, 2:1). Data for (R/S)-1,2,3,4-tetrahydro-4-propylquinoline: 1H NMR (400 MHz, CDCl3) 7.07 (d, 1H, J=7.6, 5-H), 7.02 (ddd, 1H, J=7.9, 7.9, 1.1, 7-H), 6.77 (dd, 1H, J=7.5, 7.4, 6-H), 6.67 (d, 1H, J=7.9, 8-H), 6.25 (br s, 1H, NH), 3.37 (ddd, 1H, J=11.5, 11.5, 3.5, 2-H), 3.30 (m, 1H, 2-H), 2.78 (dddd, 1H, J=10.0, 5.0, 5.0, 4-H), 1.99 and 1.84 (2×m, 2×1H, 3-H), 1.68 (m, 1H, CH2CH2CH3), 1.47 (m, 3H, CH2CH2CH3), 0.95 (t, 3H, J=7.3, CH3).

Conditions: temp:0.00; pressure:0.00; stir:; See reaction.notes.procedure_details.

Procedure: This compound was prepared from 1-tert-butyloxycarbonyl-1,2,3,4-tetrahydro-4-hydroxy-4-propylquinoline (550 mg, 1.89 mmol) in the manner previously described for 4-ethyl-1,2,3,4-tetrahydroquinoline (EXAMPLE 345), affording 229 mg (66%) of the desired tetrahydroquinoline as a yellow oil (Rf 0.10, hexanes/EtOAc, 2:1). Data for (R/S)-1,2,3,4-tetrahydro-4-propylquinoline: 1H NMR (400 MHz, CDCl3) 7.07 (d, 1H, J=7.6, 5-H), 7.02 (ddd, 1H, J=7.9, 7.9, 1.1, 7-H), 6.77 (dd, 1H, J=7.5, 7.4, 6-H), 6.67 (d, 1H, J=7.9, 8-H), 6.25 (br s, 1H, NH), 3.37 (ddd, 1H, J=11.5, 11.5, 3.5, 2-H), 3.30 (m, 1H, 2-H), 2.78 (dddd, 1H, J=10.0, 5.0, 5.0, 4-H), 1.99 and 1.84 (2×m, 2×1H, 3-H), 1.68 (m, 1H, CH2CH2CH3), 1.47 (m, 3H, CH2CH2CH3), 0.95 (t, 3H, J=7.3, CH3).

Conditions: temp:0.00; pressure:0.00; stir:; See reaction.notes.procedure_details.

Procedure: This compound was prepared from 1-tert-butyloxycarbonyl-1,2,3,4-tetrahydro-4-hydroxy-4-propylquinoline (550 mg, 1.89 mmol) in the manner previously described for 4-ethyl-1,2,3,4-tetrahydroquinoline (EXAMPLE 345), affording 229 mg (66%) of the desired tetrahydroquinoline as a yellow oil (Rf 0.10, hexanes/EtOAc, 2:1). Data for (R/S)-1,2,3,4-tetrahydro-4-propylquinoline: 1H NMR (400 MHz, CDCl3) 7.07 (d, 1H, J=7.6, 5-H), 7.02 (ddd, 1H, J=7.9, 7.9, 1.1, 7-H), 6.77 (dd, 1H, J=7.5, 7.4, 6-H), 6.67 (d, 1H, J=7.9, 8-H), 6.25 (br s, 1H, NH), 3.37 (ddd, 1H, J=11.5, 11.5, 3.5, 2-H), 3.30 (m, 1H, 2-H), 2.78 (dddd, 1H, J=10.0, 5.0, 5.0, 4-H), 1.99 and 1.84 (2×m, 2×1H, 3-H), 1.68 (m, 1H, CH2CH2CH3), 1.47 (m, 3H, CH2CH2CH3), 0.95 (t, 3H, J=7.3, CH3).

Conditions: temp:-10.01; pressure:0.00; stir:; See reaction.notes.procedure_details.

Procedure: A 25-mL rb flask containing (R/S)-4-ethyl-1,2,3,4-tetrahydroquinoline (340 mg, 2.1 mmol) was cooled to -10° C., and conc. H2SO4 (5 mL) was added slowly. The resulting solution was warmed to rt to effect complete dissolution of the quinoline, then cooled again to -10° C. and stirred vigorously. Fuming HNO3 (85 μL) was added dropwise, slowly, and the reaction mixture turned dark red. After 10 min, the reaction mixture was poured onto cracked ice and diluted with water (5 mL). Sat'd NaHCO3 (80 mL) was added, and the pH was adjusted to pH 9 with 3.0 M NaOH. This aqueous phase was extracted with EtOAc (3×75 mL), and the combined extracts were dried (Na2SO4), and concentrated under reduced pressure to yield a dark red oil. This crude material was placed into a 250-mL rb flask with 1:1 EtOAc/EtOH (40 mL) and 10% Pd on C (approx. 1 mol %). The vessel was evacuated and flushed with nitrogen three times, then stirred under an atmosphere of hydrogen for 16 h, filtered, and concentrated under reduced pressure to yield a yellow oil, which was purified by flash chromatography (silica gel, CH2Cl2 /methanol, 9:1). Data for (R/S)-7-amino-4-ethyl-1,2,3,4-tetrahydroquinoline: 1H NMR (400 MHz, CDCl3) 6.81 (d, 1H, J=8.1, 5-H), 6.02 (dd, 1H, J=8.0, 2.2, 6-H), 5.84 (d, 1H, J=2.3, 8-H), 3.48 (s, 2H, NH2), 3.27 (ddd, 1H, J=11.1, 11.1, 3.5, 2-H), 3.20 (ddd, 1H, J=9.8, 5.3, 4.5, 2-H), 2.55 (dddd, 1H, J=10.2, 5.2, 5.2, 5.2, 4H), 1.90 (dddd, 1H, J=9.6, 9.6, 9.6, 4.7, 3-H), 1.72 (m, 2H, 3-H, CH2CH3), 1.48 (m, 1H, CH2CH3), 0.96 (t, 3H, J=7.4, CH3). The resulting solution was warmed to rt cooled again to -10° C. the reaction mixture was poured This aqueous phase was extracted with EtOAc (3×75 mL) the combined extracts were dried (Na2SO4) concentrated under reduced pressure to yield a dark red oil The vessel was evacuated flushed with nitrogen three times stirred under an atmosphere of hydrogen for 16 h filtered concentrated under reduced pressure to yield a yellow oil, which was purified by flash chromatography (silica gel, CH2Cl2 /methanol, 9:1)

Conditions: temp:-10.01; pressure:0.00; stir:; See reaction.notes.procedure_details.

Procedure: A 25-mL rb flask containing (R/S)-4-ethyl-1,2,3,4-tetrahydroquinoline (340 mg, 2.1 mmol) was cooled to -10° C., and conc. H2SO4 (5 mL) was added slowly. The resulting solution was warmed to rt to effect complete dissolution of the quinoline, then cooled again to -10° C. and stirred vigorously. Fuming HNO3 (85 μL) was added dropwise, slowly, and the reaction mixture turned dark red. After 10 min, the reaction mixture was poured onto cracked ice and diluted with water (5 mL). Sat'd NaHCO3 (80 mL) was added, and the pH was adjusted to pH 9 with 3.0 M NaOH. This aqueous phase was extracted with EtOAc (3×75 mL), and the combined extracts were dried (Na2SO4), and concentrated under reduced pressure to yield a dark red oil. This crude material was placed into a 250-mL rb flask with 1:1 EtOAc/EtOH (40 mL) and 10% Pd on C (approx. 1 mol %). The vessel was evacuated and flushed with nitrogen three times, then stirred under an atmosphere of hydrogen for 16 h, filtered, and concentrated under reduced pressure to yield a yellow oil, which was purified by flash chromatography (silica gel, CH2Cl2 /methanol, 9:1). Data for (R/S)-7-amino-4-ethyl-1,2,3,4-tetrahydroquinoline: 1H NMR (400 MHz, CDCl3) 6.81 (d, 1H, J=8.1, 5-H), 6.02 (dd, 1H, J=8.0, 2.2, 6-H), 5.84 (d, 1H, J=2.3, 8-H), 3.48 (s, 2H, NH2), 3.27 (ddd, 1H, J=11.1, 11.1, 3.5, 2-H), 3.20 (ddd, 1H, J=9.8, 5.3, 4.5, 2-H), 2.55 (dddd, 1H, J=10.2, 5.2, 5.2, 5.2, 4H), 1.90 (dddd, 1H, J=9.6, 9.6, 9.6, 4.7, 3-H), 1.72 (m, 2H, 3-H, CH2CH3), 1.48 (m, 1H, CH2CH3), 0.96 (t, 3H, J=7.4, CH3). The resulting solution was warmed to rt cooled again to -10° C. the reaction mixture was poured This aqueous phase was extracted with EtOAc (3×75 mL) the combined extracts were dried (Na2SO4) concentrated under reduced pressure to yield a dark red oil The vessel was evacuated flushed with nitrogen three times stirred under an atmosphere of hydrogen for 16 h filtered concentrated under reduced pressure to yield a yellow oil, which was purified by flash chromatography (silica gel, CH2Cl2 /methanol, 9:1)

Conditions: temp:0.00; pressure:0.00; stir:; See reaction.notes.procedure_details.

Procedure: This compound was prepared from 1-tert-butyloxycarbonyl-1,2,3,4-tetrahydro-4-hydroxy-4-propylquinoline (550 mg, 1.89 mmol) in the manner previously described for 4-ethyl-1,2,3,4-tetrahydroquinoline (EXAMPLE 345), affording 229 mg (66%) of the desired tetrahydroquinoline as a yellow oil (Rf 0.10, hexanes/EtOAc, 2:1). Data for (R/S)-1,2,3,4-tetrahydro-4-propylquinoline: 1H NMR (400 MHz, CDCl3) 7.07 (d, 1H, J=7.6, 5-H), 7.02 (ddd, 1H, J=7.9, 7.9, 1.1, 7-H), 6.77 (dd, 1H, J=7.5, 7.4, 6-H), 6.67 (d, 1H, J=7.9, 8-H), 6.25 (br s, 1H, NH), 3.37 (ddd, 1H, J=11.5, 11.5, 3.5, 2-H0, 3.30 (m, 1H, 2-H), 2.78 (dddd, 1H, J=10.0, 5.0, 5.0, 5.0, 4-H), 1.99 and 1.84 (2×m, 2×1H, 3-H), 1.68 (m, 1H, CH2CH2CH3), 1.47 (m, 3H, CH2CH2CH3), 0.95 (t, 3H, J=7.3, CH3).

Conditions: temp:-10.01; pressure:0.00; stir:; See reaction.notes.procedure_details.

Procedure: A 25-mL rb flask containing (R/S)-4-ethyl-1,2,3,4-tetrahydroquinoline (340 mg, 2.1 mmol) was cooled to −10° C., and conc. H2SO4 (5 mL) was added slowly. The resulting solution was warmed to rt to effect complete dissolution of the quinoline, then cooled again to −10° C. and stirred vigorously. Fuming HNO3 (85 μL) was added dropwise, slowly, and the reaction mixture turned dark red. After 10 min, the reaction mixture was poured onto cracked ice and diluted with water (5 mL). Sat'd NaHCO3 (80 mL) was added, and the pH was adjusted to pH 9 with 3.0 M NaOH. This aqueous phase was extracted with EtOAc (3×75 mL), and the combined extracts were dried (Na2SO4), and concentrated under reduced pressure to yield a dark red oil. This crude material was placed into a 250-mL rb flask with 1:1 EtOAc/EtOH (40 mL) and 10% Pd on C (approx. 1 mol %). The vessel was evacuated and flushed with nitrogen three times, then stirred under an atmosphere of hydrogen for 16 h, filtered, and concentrated under reduced pressure to yield a yellow oil, which was purified by flash chromatography (silica gel, CH2Cl2/methanol, 9:1), affording 210 mg (57%) of the desired product as a dark yellow oil (Rƒ0.50, CH2Cl2/MeOH, 9:1). Data for (R/S)-7-amino-4-ethyl-1,2,3,4-tetrahydroquinoline: 1H NMR (400 MHz, CDCl3) 6.81 (d, 1H, J=8.1, 5-H), 6.02 (dd, 1H, J=8.0, 2.2, 6-H), 5.84 (d, 1H, J=2.3, 8-H), 3.48 (s, 2H, NH2), 3.27 (ddd, 1H, J=11.1, 11.1, 3.5, 2-H), 3.20 (ddd, 1H, J=9.8, 5.3, 4.5, 2-H), 2.55 (dddd, 1H, J=10.2, 5.2, 5.2, 5.2, 4H), 1.90 (dddd, 1H, J=9.6, 9.6, 9.6, 4.7, 3-H), 1.72 (m, 2H, 3-H, CH2CH3), 1.48 (m, 1H, CH2CH3), 0.96 (t, 3H, J=7.4, CH3). The resulting solution was warmed to rt cooled again to −10° C. the reaction mixture was poured This aqueous phase was extracted with EtOAc (3×75 mL) the combined extracts were dried (Na2SO4) concentrated under reduced pressure to yield a dark red oil The vessel was evacuated flushed with nitrogen three times stirred under an atmosphere of hydrogen for 16 h filtered concentrated under reduced pressure to yield a yellow oil, which was purified by flash chromatography (silica gel, CH2Cl2/methanol, 9:1)