1-[2-(trifluoromethyl)phenyl]ethanone

Conditions: temp:25.01; pressure:0.00; stir:; See reaction.notes.procedure_details.

Procedure: 2′-(Trifluoromethyl)acetophenone (10.0 g) was dissolved in chloroform (30 mL) and diethyl ether (30 mL), a solution of bromine (8.50 g) in chloroform (20 mL) was added dropwise while maintaining the reaction temperature at not higher than 25° C. After the dropwise addition, the mixture was stirred at room temperature for 1 hr, water was added to the reaction mixture and the mixture was extracted with chloroform. The extract was washed with saturated brine, dried over anhydrous magnesium sulfate, concentration under reduced pressure to give crude 2-bromo-1-(2-trifluoromethylphenyl)ethanone. Potassium carbonate (13.82 g) was added to ethyl cyanoacetate (44.44 g), and the mixture was stirred at 45° C. for 1 hr. A solution of crude 2-bromo-1-(2-trifluoromethylphenyl)ethanone in acetone (100 mL) was added dropwise. After completion of the dropwise addition, the mixture was stirred at the same temperature for 1 hr, and stirred overnight at room temperature. The reaction mixture was filtered, and the filtrate was concentrated under reduced pressure. Water was added to the residue, and the mixture was extracted with ethyl acetate. The extract was washed with saturated brine, dried over anhydrous magnesium sulfate, and concentrated under reduced pressure. Excess ethyl cyanoacetate contained in the obtained oil was evaporated under reduced pressure and the residue was purified by silica gel column chromatography (eluent:hexane-ethyl acetate=9:1→7:1) to give the title compound as an oil (yield 10.43 g, from 2′-(trifluoromethyl)acetophenone, yield 66%). After the dropwise addition the mixture was extracted with chloroform The extract was washed with saturated brine dried over anhydrous magnesium sulfate, concentration under reduced pressure

Conditions: temp:25.01; pressure:0.00; stir:; See reaction.notes.procedure_details.

Procedure: 2′-(Trifluoromethyl)acetophenone (10.0 g) was dissolved in chloroform (30 mL) and diethyl ether (30 mL), a solution of bromine (8.50 g) in chloroform (20 mL) was added dropwise while maintaining the reaction temperature at not higher than 25° C. After the dropwise addition, the mixture was stirred at room temperature for 1 hr, water was added to the reaction mixture and the mixture was extracted with chloroform. The extract was washed with saturated brine, dried over anhydrous magnesium sulfate, concentration under reduced pressure to give crude 2-bromo-1-(2-trifluoromethylphenyl)ethanone. Potassium carbonate (13.82 g) was added to ethyl cyanoacetate (44.44 g), and the mixture was stirred at 45° C. for 1 hr. A solution of crude 2-bromo-1-(2-trifluoromethylphenyl)ethanone in acetone (100 mL) was added dropwise. After completion of the dropwise addition, the mixture was stirred at the same temperature for 1 hr, and stirred overnight at room temperature. The reaction mixture was filtered, and the filtrate was concentrated under reduced pressure. Water was added to the residue, and the mixture was extracted with ethyl acetate. The extract was washed with saturated brine, dried over anhydrous magnesium sulfate, and concentrated under reduced pressure. Excess ethyl cyanoacetate contained in the obtained oil was evaporated under reduced pressure and the residue was purified by silica gel column chromatography (eluent:hexane-ethyl acetate=9:1→7:1) to give the title compound as an oil (yield 10.43 g, from 2′-(trifluoromethyl)acetophenone, yield 66%). After the dropwise addition the mixture was extracted with chloroform The extract was washed with saturated brine dried over anhydrous magnesium sulfate, concentration under reduced pressure

Conditions: temp:0.00; pressure:0.00; stir:; See reaction.notes.procedure_details.

Procedure: A mixture of 35 g. of o-trifluoromethylacetophenone in 35 ml. of dimethylformamide dimethylacetal is refluxed for 8 hours under anhydrous conditions and then evaporated to a yellow oil. Bulb to bulb distillation gives the desired product as a thick yellow oil. A mixture of 35 g evaporated to a yellow oil Bulb to bulb distillation

Conditions: temp:0.00; pressure:0.00; stir:; See reaction.notes.procedure_details.

Procedure: A mixture of 35 g. of o-trifluoromethylacetophenone in 35 ml. of dimethylformamide dimethylacetal is refluxed for 8 hours under anhydrous conditions and then evaporated to a yellow oil. Bulb to bulb distillation gives the desired product as a thick yellow oil. A mixture of 35 g evaporated to a yellow oil Bulb to bulb distillation

Conditions: temp:-78.01; pressure:0.00; stir:; See reaction.notes.procedure_details.

Procedure: To a stirred solution of 2′-trifluoromethyl-acetophenone (225 mL, 15.0 mmol) in THF (20 mL, anhyd) at −78° C. added dropwise a 1.0M solution of lithium hexamethyldisilazide (LiHMDS) (15.8 mL, 15.8 mmol). After 1 h the reaction mixture was cooled to −78° C. and charged dropwise with ethyl trifluoroacetate (3.6 mL, 30 mmol). After addition was complete, the reaction mixture was allowed to warm to ambient temperature. The reaction mixture was quenched by slow addition of H2O (20 mL) and concentrated under reduced pressure. The resulting material was transferred to a separatory funnel, diluted with Et2O (60 mL), washed with 1N HCl and brine, then dried (MgSO4) and concentrated to yield the title compound (4.2 g, 99%) as an amber liquid, which was used in the next step without purification. Rf: 0.15 (20% EtOAc/Hex). After addition to warm to ambient temperature The reaction mixture was quenched by slow addition of H2O (20 mL) concentrated under reduced pressure The resulting material was transferred to a separatory funnel diluted with Et2O (60 mL) washed with 1N HCl and brine dried (MgSO4) concentrated

Conditions: temp:-78.01; pressure:0.00; stir:; See reaction.notes.procedure_details.

Procedure: To a stirred solution of 2′-trifluoromethyl-acetophenone (225 mL, 15.0 mmol) in THF (20 mL, anhyd) at −78° C. added dropwise a 1.0M solution of lithium hexamethyldisilazide (LiHMDS) (15.8 mL, 15.8 mmol). After 1 h the reaction mixture was cooled to −78° C. and charged dropwise with ethyl trifluoroacetate (3.6 mL, 30 mmol). After addition was complete, the reaction mixture was allowed to warm to ambient temperature. The reaction mixture was quenched by slow addition of H2O (20 mL) and concentrated under reduced pressure. The resulting material was transferred to a separatory funnel, diluted with Et2O (60 mL), washed with 1N HCl and brine, then dried (MgSO4) and concentrated to yield the title compound (4.2 g, 99%) as an amber liquid, which was used in the next step without purification. Rf: 0.15 (20% EtOAc/Hex). After addition to warm to ambient temperature The reaction mixture was quenched by slow addition of H2O (20 mL) concentrated under reduced pressure The resulting material was transferred to a separatory funnel diluted with Et2O (60 mL) washed with 1N HCl and brine dried (MgSO4) concentrated

Conditions: temp:-78.01; pressure:0.00; stir:; See reaction.notes.procedure_details.

Procedure: To a stirred solution of 2′-trifluoromethyl-acetophenone (225 mL, 15.0 mmol) in THF (20 mL, anhyd) at −78° C. added dropwise a 1.0M solution of lithium hexamethyldisilazide (LiHMDS) (15.8 mL, 15.8 mmol). After 1 h the reaction mixture was cooled to −78° C. and charged dropwise with ethyl trifluoroacetate (3.6 mL, 30 mmol). After addition was complete, the reaction mixture was allowed to warm to ambient temperature. The reaction mixture was quenched by slow addition of H2O (20 mL) and concentrated under reduced pressure. The resulting material was transferred to a separatory funnel, diluted with Et2O (60 mL), washed with 1N HCl and brine, then dried (MgSO4) and concentrated to yield the title compound (4.2 g, 99%) as an amber liquid, which was used in the next step without purification. Rf: 0.15 (20% EtOAc/Hex). After addition to warm to ambient temperature The reaction mixture was quenched by slow addition of H2O (20 mL) concentrated under reduced pressure The resulting material was transferred to a separatory funnel diluted with Et2O (60 mL) washed with 1N HCl and brine dried (MgSO4) concentrated

Conditions: temp:25.01; pressure:0.00; stir:; See reaction.notes.procedure_details.

Procedure: 2′-(Trifluoromethyl)acetophenone (10.0 g) was dissolved in chloroform (30 mL) and diethyl ether (30 mL), a solution of bromine (8.50 g) in chloroform (20 mL) was added dropwise while maintaining the reaction temperature at not higher than 25° C. After the dropwise addition, the mixture was stirred at room temperature for 1 hr, water was added to the reaction mixture and the mixture was extracted with chloroform. The extract was washed with saturated brine, dried over anhydrous magnesium sulfate, concentration under reduced pressure to give crude 2-bromo-1-(2-trifluoromethylphenyl)ethanone. Potassium carbonate (13.82 g) was added to ethyl cyanoacetate (44.44 g), and the mixture was stirred at 45° C. for 1 hr. A solution of crude 2-bromo-1-(2-trifluoromethylphenyl)ethanone in acetone (100 mL) was added dropwise. After completion of the dropwise addition, the mixture was stirred at the same temperature for 1 hr, and stirred overnight at room temperature. The reaction mixture was filtered, and the filtrate was concentrated under reduced pressure. Water was added to the residue, and the mixture was extracted with ethyl acetate. The extract was washed with saturated brine, dried over anhydrous magnesium sulfate, and concentrated under reduced pressure. Excess ethyl cyanoacetate contained in the obtained oil was evaporated under reduced pressure and the residue was purified by silica gel column chromatography (eluent: hexane-ethyl acetate=9:1→7:1) to give the title compound as an oil (yield 10.43 g, from 2′-(trifluoromethyl)acetophenone, yield 66%). After the dropwise addition the mixture was extracted with chloroform The extract was washed with saturated brine dried over anhydrous magnesium sulfate, concentration under reduced pressure

Conditions: temp:25.01; pressure:0.00; stir:; See reaction.notes.procedure_details.

Procedure: 2′-(Trifluoromethyl)acetophenone (10.0 g) was dissolved in chloroform (30 mL) and diethyl ether (30 mL), a solution of bromine (8.50 g) in chloroform (20 mL) was added dropwise while maintaining the reaction temperature at not higher than 25° C. After the dropwise addition, the mixture was stirred at room temperature for 1 hr, water was added to the reaction mixture and the mixture was extracted with chloroform. The extract was washed with saturated brine, dried over anhydrous magnesium sulfate, concentration under reduced pressure to give crude 2-bromo-1-(2-trifluoromethylphenyl)ethanone. Potassium carbonate (13.82 g) was added to ethyl cyanoacetate (44.44 g), and the mixture was stirred at 45° C. for 1 hr. A solution of crude 2-bromo-1-(2-trifluoromethylphenyl)ethanone in acetone (100 mL) was added dropwise. After completion of the dropwise addition, the mixture was stirred at the same temperature for 1 hr, and stirred overnight at room temperature. The reaction mixture was filtered, and the filtrate was concentrated under reduced pressure. Water was added to the residue, and the mixture was extracted with ethyl acetate. The extract was washed with saturated brine, dried over anhydrous magnesium sulfate, and concentrated under reduced pressure. Excess ethyl cyanoacetate contained in the obtained oil was evaporated under reduced pressure and the residue was purified by silica gel column chromatography (eluent:hexane-ethyl acetate=9:1→7:1) to give the title compound as an oil (yield 10.43 g, from 2′-(trifluoromethyl)acetophenone, yield 66%). After the dropwise addition the mixture was extracted with chloroform The extract was washed with saturated brine dried over anhydrous magnesium sulfate, concentration under reduced pressure

Conditions: temp:25.01; pressure:0.00; stir:; See reaction.notes.procedure_details.

Procedure: 2′-(Trifluoromethyl)acetophenone (10.0 g) was dissolved in chloroform (30 mL) and diethyl ether (30 mL), a solution of bromine (8.50 g) in chloroform (20 mL) was added dropwise while maintaining the reaction temperature at not higher than 25° C. After the dropwise addition, the mixture was stirred at room temperature for 1 hr, water was added to the reaction mixture and the mixture was extracted with chloroform. The extract was washed with saturated brine, dried over anhydrous magnesium sulfate, concentration under reduced pressure to give crude 2-bromo-1-(2-trifluoromethylphenyl)ethanone. Potassium carbonate (13.82 g) was added to ethyl cyanoacetate (44.44 g), and the mixture was stirred at 45° C. for 1 hr. A solution of crude 2-bromo-1-(2-trifluoromethylphenyl)ethanone in acetone (100 mL) was added dropwise. After completion of the dropwise addition, the mixture was stirred at the same temperature for 1 hr, and stirred overnight at room temperature. The reaction mixture was filtered, and the filtrate was concentrated under reduced pressure. Water was added to the residue, and the mixture was extracted with ethyl acetate. The extract was washed with saturated brine, dried over anhydrous magnesium sulfate, and concentrated under reduced pressure. Excess ethyl cyanoacetate contained in the obtained oil was evaporated under reduced pressure and the residue was purified by silica gel column chromatography (eluent: hexane-ethyl acetate=9:1→7:1) to give the title compound as an oil (yield 10.43 g, from 2′-(trifluoromethyl)acetophenone, yield 66%). After the dropwise addition the mixture was extracted with chloroform The extract was washed with saturated brine dried over anhydrous magnesium sulfate, concentration under reduced pressure

Conditions: temp:25.01; pressure:0.00; stir:; See reaction.notes.procedure_details.

Procedure: 2′-(Trifluoromethyl)acetophenone (10.0 g) was dissolved in chloroform (30 mL) and diethyl ether (30 mL), a solution of bromine (8.50 g) in chloroform (20 mL) was added dropwise while maintaining the reaction temperature at not higher than 25° C. After the dropwise addition, the mixture was stirred at room temperature for 1 hr, water was added to the reaction mixture and the mixture was extracted with chloroform. The extract was washed with saturated brine, dried over anhydrous magnesium sulfate, concentration under reduced pressure to give crude 2-bromo-1-(2-trifluoromethylphenyl)ethanone. Potassium carbonate (13.82 g) was added to ethyl cyanoacetate (44.44 g), and the mixture was stirred at 45° C. for 1 hr. A solution of crude 2-bromo-1-(2-trifluoromethylphenyl)ethanone in acetone (100 mL) was added dropwise. After completion of the dropwise addition, the mixture was stirred at the same temperature for 1 hr, and stirred overnight at room temperature. The reaction mixture was filtered, and the filtrate was concentrated under reduced pressure. Water was added to the residue, and the mixture was extracted with ethyl acetate. The extract was washed with saturated brine, dried over anhydrous magnesium sulfate, and concentrated under reduced pressure. Excess ethyl cyanoacetate contained in the obtained oil was evaporated under reduced pressure and the residue was purified by silica gel column chromatography (eluent: hexane-ethyl acetate=9:1→7:1) to give the title compound as an oil (yield 10.43 g, from 2′-(trifluoromethyl)acetophenone, yield 66%). After the dropwise addition the mixture was extracted with chloroform The extract was washed with saturated brine dried over anhydrous magnesium sulfate, concentration under reduced pressure

Conditions: temp:25.01; pressure:0.00; stir:; See reaction.notes.procedure_details.

Procedure: 2′-(Trifluoromethyl)acetophenone (10.0 g) was dissolved in chloroform (30 mL) and diethyl ether (30 mL), a solution of bromine (8.50 g) in chloroform (20 mL) was added dropwise while maintaining the reaction temperature at not higher than 25° C. After the dropwise addition, the mixture was stirred at room temperature for 1 hr, water was added to the reaction mixture and the mixture was extracted with chloroform. The extract was washed with saturated brine, dried over anhydrous magnesium sulfate, concentration under reduced pressure to give crude 2-bromo-1-(2-trifluoromethylphenyl)ethanone. Potassium carbonate (13.82 g) was added to ethyl cyanoacetate (44.44 g), and the mixture was stirred at 45° C. for 1 hr. A solution of crude 2-bromo-1-(2-trifluoromethylphenyl)ethanone in acetone (100 mL) was added dropwise. After completion of the dropwise addition, the mixture was stirred at the same temperature for 1 hr, and stirred overnight at room temperature. The reaction mixture was filtered, and the filtrate was concentrated under reduced pressure. Water was added to the residue, and the mixture was extracted with ethyl acetate. The extract was washed with saturated brine, dried over anhydrous magnesium sulfate, and concentrated under reduced pressure. Excess ethyl cyanoacetate contained in the obtained oil was evaporated under reduced pressure and the residue was purified by silica gel column chromatography (eluent: hexane-ethyl acetate=9:1→7:1) to give the title compound as an oil (yield 10.43 g, from 2′-(trifluoromethyl)acetophenone, yield 66%). After the dropwise addition the mixture was extracted with chloroform The extract was washed with saturated brine dried over anhydrous magnesium sulfate, concentration under reduced pressure