benzyl N-but-3-ynylcarbamate

Conditions: temp:0.00; pressure:0.00; stir:

Conditions: temp:0.00; pressure:0.00; stir:

Conditions: temp:0.00; pressure:0.00; stir:

Conditions: temp:0.00; pressure:0.00; stir:; See reaction.notes.procedure_details.

Procedure: To a solution of [2-(4-iodophenylcarbamoyl)ethyl]carbamic acid tert-butyl ester 310 (1.5 g, 3.84 mmol), and triethylamine (40 mL) was added trans-dichlorobis-(triphenylphosphine)palladium (II) (Ph3P, PdCl2, 0.27 g, 0.38 mmol). The reaction mixture was stirred for 20 minutes when it became a clear solution. But-3-ynyl-carbamic acid benzyl ester (0.94 g, 4.6 mmol) and copper iodide (0.14 g, 0.768 mmol) were then added and the reaction was further stirred at room temperature for 18 hours. The solvent was evaporated in vacuo. The residue was dissolved in dichloromethane (100 mL) and washed with water (3×150 mL). The organic layer was dried over sodium sulfate and then concentrated in vacuo. The residue was purified by flash chromatography (silica gel, 1:1, v/v hexanes/ethyl acetate) to provide 320 (1.91 g, still a mixture, but used as it was without further purification). 1H NMR (300 MHz, CDCl3) δ 1.44 (s, 9H), 2.60 (m, 4H), 3.47 (m, 4H), 5.12 (s, 2H), 7.37 (m, 7H), 7.49 (d, 2H). the reaction was further stirred at room temperature for 18 hours The solvent was evaporated in vacuo The residue was dissolved in dichloromethane (100 mL) washed with water (3×150 mL) The organic layer was dried over sodium sulfate concentrated in vacuo The residue was purified by flash chromatography (silica gel, 1:1, v/v hexanes/ethyl acetate)

Conditions: temp:0.00; pressure:0.00; stir:; See reaction.notes.procedure_details.

Procedure: To a solution of [2-(4-iodophenylcarbamoyl)ethyl]carbamic acid tert-butyl ester 310 (1.5 g, 3.84 mmol), and triethylamine (40 mL) was added trans-dichlorobis-(triphenylphosphine)palladium (II) (Ph3P, PdCl2, 0.27 g, 0.38 mmol). The reaction mixture was stirred for 20 minutes when it became a clear solution. But-3-ynyl-carbamic acid benzyl ester (0.94 g, 4.6 mmol) and copper iodide (0.14 g, 0.768 mmol) were then added and the reaction was further stirred at room temperature for 18 hours. The solvent was evaporated in vacuo. The residue was dissolved in dichloromethane (100 mL) and washed with water (3×150 mL). The organic layer was dried over sodium sulfate and then concentrated in vacuo. The residue was purified by flash chromatography (silica gel, 1:1, v/v hexanes/ethyl acetate) to provide 320 (1.91 g, still a mixture, but used as it was without further purification). 1H NMR (300 MHz, CDCl3) δ 1.44 (s, 9H), 2.60 (m, 4H), 3.47 (m, 4H), 5.12 (s, 2H), 7.37 (m, 7H), 7.49 (d, 2H). the reaction was further stirred at room temperature for 18 hours The solvent was evaporated in vacuo The residue was dissolved in dichloromethane (100 mL) washed with water (3×150 mL) The organic layer was dried over sodium sulfate concentrated in vacuo The residue was purified by flash chromatography (silica gel, 1:1, v/v hexanes/ethyl acetate)

Conditions: temp:0.00; pressure:0.00; stir:; See reaction.notes.procedure_details.

Procedure: To a mixture of anhydrous THF and triethylamine (24 mL, 2/1, v/v) were sequentially added 1,4-diiodobenzene (2.03 g, 6.15 mmol) and copper (1) iodide (0.094 g, 0.246 mmol). The mixture was stirred at room temperature for 15 min. The flask was then evacuated and re-filled with Argon. The procedure was repeated three more times to ensure no oxygen remained. The catalyst, dichlorobis(triphenylphosphine)palladium(II) (0.173 g, 0.246 mmol) was added into the mixture under Argon protection. The other starting material, but-3-ynylcarbamic acid benzyl ester (0.50 g, 2.46 mmol), dissolved in TBF (8 mL) was added dropwise over 6 hours. The newly formed reaction mixture was further stirred at room temperature overnight. The solid in the reaction mixture was vacuum filtered. The filtrate was concentrated. The residue was re-dissolved in dichloromethane and purified by column chromatography, eluting with a mixture of ethyl acetate (0-12%) and hexanes (100-88%) to afford the product 210 (0.852 g, 86%) as an off-white solid. 1H NMR (300 MHz, CDCl3): δ 2.61 (t, J=6.4 Hz, 2H), 3.44 (t, J=6.4 Hz, 2H), 5.07 (br s, 1H), 5.12 (s, 2H), 7.10 (d, J=8.3 Hz, 2H), 7.35 (m, 5H), 7.63 (d, J=8.3 Hz, 2H). m/z (APCI) 405 [C18H16NO2+H]+. The flask was then evacuated re-filled with Argon was added dropwise over 6 hours The newly formed reaction mixture was further stirred at room temperature overnight filtered The filtrate was concentrated The residue was re-dissolved in dichloromethane purified by column chromatography eluting with a mixture of ethyl acetate (0-12%) and hexanes (100-88%)

Conditions: temp:0.00; pressure:0.00; stir:; See reaction.notes.procedure_details.

Procedure: To a mixture of anhydrous THF and triethylamine (24 mL, 2/1, v/v) were sequentially added 1,4-diiodobenzene (2.03 g, 6.15 mmol) and copper (1) iodide (0.094 g, 0.246 mmol). The mixture was stirred at room temperature for 15 min. The flask was then evacuated and re-filled with Argon. The procedure was repeated three more times to ensure no oxygen remained. The catalyst, dichlorobis(triphenylphosphine)palladium(II) (0.173 g, 0.246 mmol) was added into the mixture under Argon protection. The other starting material, but-3-ynylcarbamic acid benzyl ester (0.50 g, 2.46 mmol), dissolved in TBF (8 mL) was added dropwise over 6 hours. The newly formed reaction mixture was further stirred at room temperature overnight. The solid in the reaction mixture was vacuum filtered. The filtrate was concentrated. The residue was re-dissolved in dichloromethane and purified by column chromatography, eluting with a mixture of ethyl acetate (0-12%) and hexanes (100-88%) to afford the product 210 (0.852 g, 86%) as an off-white solid. 1H NMR (300 MHz, CDCl3): δ 2.61 (t, J=6.4 Hz, 2H), 3.44 (t, J=6.4 Hz, 2H), 5.07 (br s, 1H), 5.12 (s, 2H), 7.10 (d, J=8.3 Hz, 2H), 7.35 (m, 5H), 7.63 (d, J=8.3 Hz, 2H). m/z (APCI) 405 [C18H16NO2+H]+. The flask was then evacuated re-filled with Argon was added dropwise over 6 hours The newly formed reaction mixture was further stirred at room temperature overnight filtered The filtrate was concentrated The residue was re-dissolved in dichloromethane purified by column chromatography eluting with a mixture of ethyl acetate (0-12%) and hexanes (100-88%)

Conditions: temp:0.00; pressure:0.00; stir:; See reaction.notes.procedure_details.

Procedure: To a mixture of anhydrous THF and triethylamine (24 mL, 2/1, v/v) were sequentially added 1,4-diiodobenzene (2.03 g, 6.15 mmol) and copper (I) iodide (0.094 g, 0.246 mmol). The mixture was stirred at room temperature for 15 min. The flask was then evacuated and re-filled with Argon. The procedure was repeated three more times to ensure no oxygen remained. The catalyst, dichlorobis(triphenylphosphine)palladium(II) (0.173 g, 0.246 mmol) was added into the mixture under Argon protection. The other starting material, but-3-ynylcarbamic acid benzyl ester (0.50 g, 2.46 mmol), dissolved in THF (8 mL) was added dropwise over 6 hours. The newly formed reaction mixture was further stirred at room temperature overnight. The solid in the reaction mixture was vacuum filtered. The filtrate was concentrated. The residue was re-dissolved in dichloromethane and purified by column chromatography, eluting with a mixture of ethyl acetate (0-12%) and hexanes (100-88%) to afford the product 22 (0.852 g, 86%) as an off-white solid. 1H NMR (300 MHz, CDCl3): δ 2.61 (t, J=6.4 Hz, 2H), 3.44 (t, J=6.4 Hz, 2H), 5.07 (br s, 1H), 5.12 (s, 2H), 7.10 (d, J=8.3 Hz, 2H), 7.35 (m, 5H), 7.63 (d, J=8.3 Hz, 2H). m/z (APCI) 405 [C18H16NO2+H]+. The flask was then evacuated re-filled with Argon was added dropwise over 6 hours The newly formed reaction mixture was further stirred at room temperature overnight filtered The filtrate was concentrated The residue was re-dissolved in dichloromethane purified by column chromatography eluting with a mixture of ethyl acetate (0-12%) and hexanes (100-88%)

Conditions: temp:0.00; pressure:0.00; stir:; See reaction.notes.procedure_details.

Procedure: To a mixture of anhydrous THF and triethylamine (24 mL, 2/1, v/v) were sequentially added 1,4-diiodobenzene (2.03 g, 6.15 mmol) and copper (I) iodide (0.094 g, 0.246 mmol). The mixture was stirred at room temperature for 15 min. The flask was then evacuated and re-filled with Argon. The procedure was repeated three more times to ensure no oxygen remained. The catalyst, dichlorobis(triphenylphosphine)palladium(II) (0.173 g, 0.246 mmol) was added into the mixture under Argon protection. The other starting material, but-3-ynylcarbamic acid benzyl ester (0.50 g, 2.46 mmol), dissolved in THF (8 mL) was added dropwise over 6 hours. The newly formed reaction mixture was further stirred at room temperature overnight. The solid in the reaction mixture was vacuum filtered. The filtrate was concentrated. The residue was re-dissolved in dichloromethane and purified by column chromatography, eluting with a mixture of ethyl acetate (0-12%) and hexanes (100-88%) to afford the product 22 (0.852 g, 86%) as an off-white solid. 1H NMR (300 MHz, CDCl3): δ 2.61 (t, J=6.4 Hz, 2H), 3.44 (t, J=6.4 Hz, 2H), 5.07 (br s, 1H), 5.12 (s, 2H), 7.10 (d, J=8.3 Hz, 2H), 7.35 (m, 5H), 7.63 (d, J=8.3 Hz, 2H). m/z (APCI) 405 [C18H16NO2+H]+. The flask was then evacuated re-filled with Argon was added dropwise over 6 hours The newly formed reaction mixture was further stirred at room temperature overnight filtered The filtrate was concentrated The residue was re-dissolved in dichloromethane purified by column chromatography eluting with a mixture of ethyl acetate (0-12%) and hexanes (100-88%)

Conditions: temp:0.00; pressure:0.00; stir:; See reaction.notes.procedure_details.

Procedure: To a mixture of anhydrous THF and triethylamine (24 mL, 2/1, v/v) were sequentially added 1,4-diiodobenzene (2.03 g, 6.15 mmol) and copper (I) iodide (0.094 g, 0.246 mmol). The mixture was stirred at room temperature for 15 min. The flask was then evacuated and re-filled with Argon. The procedure was repeated three more times to ensure no oxygen remained. The catalyst, dichlorobis(triphenylphosphine)palladium(II) (0.173 g, 0.246 mmol) was added into the mixture under Argon protection. The other starting material, but-3-ynylcarbamic acid benzyl ester (0.50 g, 2.46 mmol), dissolved in THF (8 mL) was added dropwise over 6 hours. The newly formed reaction mixture was further stirred at room temperature overnight. The solid in the reaction mixture was vacuum filtered. The filtrate was concentrated. The residue was re-dissolved in dichloromethane and purified by column chromatography, eluting with a mixture of ethyl acetate (0-12%) and hexanes (100-88%) to afford the product 22 (0.852 g, 86%) as an off-white solid. 1H NMR (300 MHz, CDCl3): δ 2.61 (t, J=6.4 Hz, 2H), 3.44 (t, J=6.4 Hz, 2H), 5.07 (br s, 1H), 5.12 (s, 2H), 7.10 (d, J=8.3 Hz, 2H), 7.35 (m, 5H), 7.63 (d, J=8.3 Hz, 2H). m/z (APCI) 405 [C18H16NO2+H]+. The flask was then evacuated re-filled with Argon was added dropwise over 6 hours The newly formed reaction mixture was further stirred at room temperature overnight filtered The filtrate was concentrated The residue was re-dissolved in dichloromethane purified by column chromatography eluting with a mixture of ethyl acetate (0-12%) and hexanes (100-88%)

Conditions: temp:0.00; pressure:0.00; stir:; See reaction.notes.procedure_details.

Procedure: To a solution of [2-(4-iodophenylcarbamoyl)ethyl]carbamic acid tert-butyl ester 310 (1.5 g, 3.84 mmol), and triethylamine (40 mL) was added trans-dichlorobis-(triphenylphosphine)palladium (II) (Ph3P, PdCl2, 0.27 g, 0.38 mmol). The reaction mixture was stirred for 20 minutes when it became a clear solution. But-3-ynyl-carbamic acid benzyl ester (0.94 g, 4.6 mmol) and copper iodide (0.14 g, 0.768 mmol) were then added and the reaction was further stirred at room temperature for 18 hours. The solvent was evaporated in vacuo. The residue was dissolved in dichloromethane (100 mL) and washed with water (3×150 mL). The organic layer was dried over sodium sulfate and then concentrated in vacuo. The residue was purified by flash chromatography (silica gel, 1:1, v/v hexanes/ethyl acetate) to provide 320 (1.91 g, still a mixture, but used as it was without further purification). 1H NMR (300 MHz, CDCl3) δ 1.44 (s, 9H), 2.60 (m, 4H), 3.47 (m, 4H), 5.12 (s, 2H), 7.37 (m, 7H), 7.49 (d, 2H). the reaction was further stirred at room temperature for 18 hours The solvent was evaporated in vacuo The residue was dissolved in dichloromethane (100 mL) washed with water (3×150 mL) The organic layer was dried over sodium sulfate concentrated in vacuo The residue was purified by flash chromatography (silica gel, 1:1, v/v hexanes/ethyl acetate)

Conditions: temp:0.00; pressure:0.00; stir:; See reaction.notes.procedure_details.

Procedure: To a mixture of anhydrous THF and triethylamine (24 mL, 2/1, v/v) were sequentially added 1,4-diiodobenzene (2.03 g, 6.15 mmol) and copper (1) iodide (0.094 g, 0.246 mmol). The mixture was stirred at room temperature for 15 min. The flask was then evacuated and re-filled with Argon. The procedure was repeated three more times to ensure no oxygen remained. The catalyst, dichlorobis(triphenylphosphine)palladium(II) (0.173 g, 0.246 mmol) was added into the mixture under Argon protection. The other starting material, but-3-ynylcarbamic acid benzyl ester (0.50 g, 2.46 mmol), dissolved in TBF (8 mL) was added dropwise over 6 hours. The newly formed reaction mixture was further stirred at room temperature overnight. The solid in the reaction mixture was vacuum filtered. The filtrate was concentrated. The residue was re-dissolved in dichloromethane and purified by column chromatography, eluting with a mixture of ethyl acetate (0-12%) and hexanes (100-88%) to afford the product 210 (0.852 g, 86%) as an off-white solid. 1H NMR (300 MHz, CDCl3): δ 2.61 (t, J=6.4 Hz, 2H), 3.44 (t, J=6.4 Hz, 2H), 5.07 (br s, 1H), 5.12 (s, 2H), 7.10 (d, J=8.3 Hz, 2H), 7.35 (m, 5H), 7.63 (d, J=8.3 Hz, 2H). m/z (APCI) 405 [C18H16NO2+H]+. The flask was then evacuated re-filled with Argon was added dropwise over 6 hours The newly formed reaction mixture was further stirred at room temperature overnight filtered The filtrate was concentrated The residue was re-dissolved in dichloromethane purified by column chromatography eluting with a mixture of ethyl acetate (0-12%) and hexanes (100-88%)