3-fluoro-2-(oxolan-2-yl)aniline

Conditions: temp:0.00; pressure:0.00; stir:; See reaction.notes.procedure_details.

Procedure: To a stirring solution of 3-fluoro-2-tetrahydrofuran-2-yl-aniline (16) (131.9 g, 92%, 669.7 mmol) in methyl tert-butyl ether (1.456 L) and acetonitrile (485 mL) cooled to −20° C. was added N-bromosuccinimide (120.4 g, 99%, 669.7 mmol, Aldrich B81255) in 3 portions maintaining a reaction temperature below about −15° C. After complete addition stirring was continued at −15 to −10° C. for 30 minutes. 1H NMR of a worked-up aliquot showed 96% consumption of starting aniline so added another 4.82 g NBS and stirred at −10° C. for another 30 minutes. Aqueous 1 N Na2S2O3 (670 mL) was added to the reaction mixture. The cold bath was removed, the mixture stirred for 20 minutes, then diluted with EtOAc. The layers were separated and the organic phase was washed with saturated aqueous NaHCO3 (2×), water, brine, dried over Na2SO4, decanted, and concentrated under reduced pressure giving a dark amber oil. The residue was diluted with hexane and eluted through a short plug of silica eluting with 25% EtOAc/hexane to 50% EtOAc/hexane. The desired filtrate was concentrated in vacuo giving 17 as a dark amber oil (182.9 g, 90% yield; 86% NMR purity). LCMS (C18 column eluting with 10-90% CH3CN/water gradient over 5 minutes with formic acid modifier) M+1: 260.12 (3.20 min). 1H NMR (300 MHz, CDCl3) δ 7.15 (dd, J=8.6, 7.6 Hz, 1H), 6.30 (dd, J=8.7, 1.3 Hz, 1H), 5.19-5.12 (m, 1H), 4.58 (s, 2H), 4.16-4.07 (m, 1H), 3.90-3.81 (m, 1H), 2.23-1.99 (m, 4H) ppm. maintaining a reaction temperature below about −15° C After complete addition 96% consumption of starting aniline so added another 4.82 g NBS stirred at −10° C. for another 30 minutes Aqueous 1 N Na2S2O3 (670 mL) was added to the reaction mixture The cold bath was removed the mixture stirred for 20 minutes diluted with EtOAc The layers were separated the organic phase was washed with saturated aqueous NaHCO3 (2×), water, brine dried over Na2SO4 decanted concentrated under reduced pressure giving a dark amber oil eluted through a short plug of silica eluting with 25% EtOAc/hexane to 50% EtOAc/hexane The desired filtrate was concentrated in vacuo

Conditions: temp:0.00; pressure:0.00; stir:; See reaction.notes.procedure_details.

Procedure: Placed 5% palladium on carbon (37.3 g, 50% wet, 8.76 mmol, Aldrich 330116) in a Parr bottle under nitrogen, followed by MeOH (70 mL, JT-Baker 909333). Added the crude mixture of 2-(2-fluoro-6-nitro-phenyl)-2,3-dihydrofuran and 2-(2-fluoro-6-nitro-phenyl)-2,5-dihydrofuran (15A&15B) (186.6 g, 892.1 mmol) dissolved in MeOH (117 mL), followed by NEt3 (124.3 mL, 892.1 mmol, Sigma-Aldrich 471283). Placed the vessel on a Parr shaker and saturated with H2. After adding 45 psi H2, the reaction mixture was shaken until consumption of the starting material was complete (HPLC and LCMS showed complete reaction). The reaction mixture was purged with nitrogen, filtered through Celite™ and rinsed with EtOAc. The filtrate was concentrated on a rotary evaporator giving a brown oil, which was dissolved in Et2O and washed with water (2×). The ether phase was extracted with aqueous 1 N HCl (5×250 mL), which was washed with Et2O (3×) and then basified with aqueous 6 N NaOH to pH 12-14. The basic aqueous phase was extracted with CH2Cl2(4×), and the combined organic extract washed with saturated aqueous NH4Cl, dried over MgSO4, and filtered through a pad of silica eluting with CH2Cl2 to 25% EtOAc/hexane. The desired filtrate was concentrated under reduced pressure giving 16 as a light brown oil (121.8 g, 84% GCMS plus NMR purity). GCMS (Agilent HP-5MS 30 m×250 μm×0.25 μm column heating at 60° C. for 2 min to 300° C. over 15 min with a 1 mL/min flow rate) M+1: 182.0 (11.44 min). LCMS (C18 column eluting with 10-90% CH3CN/water gradient over 5 minutes with formic acid modifier) M+1: 182.10 (2.61 min). 1H NMR (300 MHz, CDCl3) δ 6.97 (td, J=8.1, 6.3 Hz, 1H), 6.43-6.35 (m, 2H), 5.21-5.13 (m, 1H), 4.54 (s, 2H), 4.16-4.07 (m, 1H), 3.90-3.81 (m, 1H), 2.23-2.00 (m, 4H) ppm. Additional crops were obtained as follows: the combined ether phase was washed with saturated aqueous NaHCO3, brine, dried over Na2SO4, decanted, and concentrated under reduced pressure. The oil was vacuum distilled (ca. 15 torr) collecting the distillate at 101-108° C. To a stirring solution of the distilled oil in EtOH (1 volume) at 2° C. was slowly added 5 M HCl (1 eq) in iPrOH. The resulting suspension was brought to room temperature, diluted with EtOAc (3 volumes, vol/vol), and stirred for 2 hrs. The white solid was collected by filtration, washed with EtOAc, and dried under reduced pressure giving a second crop of product as the HCl salt. The mother liquor was concentrated to a slurry, diluted with EtOAc and the solid collected by filtration, washed with EtOAc, and dried in vacuo giving the HCl salt as a third crop of the product. LCMS (C18 column eluting with 10-90% CH3CN/water gradient over 5 minutes with formic acid modifier) M+1: 182.10 (2.58 min). 1H NMR (300 MHz, CDCl3) δ 10.73 (br.s, 3H), 7.66 (d, J=8.1 Hz, 1H), 7.33 (td, J=8.2, 5.9 Hz, 1H), 7.13-7.05 (m, 1H), 5.26 (dd, J=9.0, 6.5 Hz, 1H), 4.38-4.28 (m, 1H), 4.00-3.91 (m, 1H), 2.59-2.46 (m, 1H), 2.30-1.95 (m, 3H) ppm. The overall yield from the three crops was 76%. Added the crude After adding 45 psi H2 (HPLC and LCMS showed complete reaction) The reaction mixture was purged with nitrogen filtered through Celite™ rinsed with EtOAc The filtrate was concentrated on a rotary evaporator giving a brown oil, which washed with water (2×) The ether phase was extracted with aqueous 1 N HCl (5×250 mL), which was washed with Et2O (3×) The basic aqueous phase was extracted with CH2Cl2(4×) the combined organic extract washed with saturated aqueous NH4Cl dried over MgSO4 filtered through a pad of silica eluting with CH2Cl2 to 25% EtOAc/hexane The desired filtrate was concentrated under reduced pressure

Conditions: temp:0.00; pressure:0.00; stir:; See reaction.notes.procedure_details.

Procedure: Placed 5% palladium on carbon (37.3 g, 50% wet, 8.76 mmol, Aldrich 330116) in a Parr bottle under nitrogen, followed by MeOH (70 mL, JT-Baker 909333). Added the crude mixture of 2-(2-fluoro-6-nitro-phenyl)-2,3-dihydrofuran and 2-(2-fluoro-6-nitro-phenyl)-2,5-dihydrofuran (15A&15B) (186.6 g, 892.1 mmol) dissolved in MeOH (117 mL), followed by NEt3 (124.3 mL, 892.1 mmol, Sigma-Aldrich 471283). Placed the vessel on a Parr shaker and saturated with H2. After adding 45 psi H2, the reaction mixture was shaken until consumption of the starting material was complete (HPLC and LCMS showed complete reaction). The reaction mixture was purged with nitrogen, filtered through Celite™ and rinsed with EtOAc. The filtrate was concentrated on a rotary evaporator giving a brown oil, which was dissolved in Et2O and washed with water (2×). The ether phase was extracted with aqueous 1 N HCl (5×250 mL), which was washed with Et2O (3×) and then basified with aqueous 6 N NaOH to pH 12-14. The basic aqueous phase was extracted with CH2Cl2(4×), and the combined organic extract washed with saturated aqueous NH4Cl, dried over MgSO4, and filtered through a pad of silica eluting with CH2Cl2 to 25% EtOAc/hexane. The desired filtrate was concentrated under reduced pressure giving 16 as a light brown oil (121.8 g, 84% GCMS plus NMR purity). GCMS (Agilent HP-5MS 30 m×250 μm×0.25 μm column heating at 60° C. for 2 min to 300° C. over 15 min with a 1 mL/min flow rate) M+1: 182.0 (11.44 min). LCMS (C18 column eluting with 10-90% CH3CN/water gradient over 5 minutes with formic acid modifier) M+1: 182.10 (2.61 min). 1H NMR (300 MHz, CDCl3) δ 6.97 (td, J=8.1, 6.3 Hz, 1H), 6.43-6.35 (m, 2H), 5.21-5.13 (m, 1H), 4.54 (s, 2H), 4.16-4.07 (m, 1H), 3.90-3.81 (m, 1H), 2.23-2.00 (m, 4H) ppm. Additional crops were obtained as follows: the combined ether phase was washed with saturated aqueous NaHCO3, brine, dried over Na2SO4, decanted, and concentrated under reduced pressure. The oil was vacuum distilled (ca. 15 torr) collecting the distillate at 101-108° C. To a stirring solution of the distilled oil in EtOH (1 volume) at 2° C. was slowly added 5 M HCl (1 eq) in iPrOH. The resulting suspension was brought to room temperature, diluted with EtOAc (3 volumes, vol/vol), and stirred for 2 hrs. The white solid was collected by filtration, washed with EtOAc, and dried under reduced pressure giving a second crop of product as the HCl salt. The mother liquor was concentrated to a slurry, diluted with EtOAc and the solid collected by filtration, washed with EtOAc, and dried in vacuo giving the HCl salt as a third crop of the product. LCMS (C18 column eluting with 10-90% CH3CN/water gradient over 5 minutes with formic acid modifier) M+1: 182.10 (2.58 min). 1H NMR (300 MHz, CDCl3) δ 10.73 (br.s, 3H), 7.66 (d, J=8.1 Hz, 1H), 7.33 (td, J=8.2, 5.9 Hz, 1H), 7.13-7.05 (m, 1H), 5.26 (dd, J=9.0, 6.5 Hz, 1H), 4.38-4.28 (m, 1H), 4.00-3.91 (m, 1H), 2.59-2.46 (m, 1H), 2.30-1.95 (m, 3H) ppm. The overall yield from the three crops was 76%. Added the crude After adding 45 psi H2 (HPLC and LCMS showed complete reaction) The reaction mixture was purged with nitrogen filtered through Celite™ rinsed with EtOAc The filtrate was concentrated on a rotary evaporator giving a brown oil, which washed with water (2×) The ether phase was extracted with aqueous 1 N HCl (5×250 mL), which was washed with Et2O (3×) The basic aqueous phase was extracted with CH2Cl2(4×) the combined organic extract washed with saturated aqueous NH4Cl dried over MgSO4 filtered through a pad of silica eluting with CH2Cl2 to 25% EtOAc/hexane The desired filtrate was concentrated under reduced pressure

Conditions: temp:0.00; pressure:0.00; stir:; See reaction.notes.procedure_details.

Procedure: To a stirring solution of 3-fluoro-2-tetrahydrofuran-2-yl-aniline (16) (131.9 g, 92%, 669.7 mmol) in methyl tert-butyl ether (1.456 L) and acetonitrile (485 mL) cooled to −20° C. was added N-bromosuccinimide (120.4 g, 99%, 669.7 mmol, Aldrich B81255) in 3 portions maintaining a reaction temperature below about −15° C. After complete addition, stirring was continued at −15 to −10° C. for 30 minutes. 1H NMR of a worked-up aliquot showed 96% consumption of starting aniline. Another 4.82 g NBS was added to the reaction mixture and stirred at −10° C. for additional 30 minutes. Aqueous 1 N Na2S2O3 (670 mL) was added to the reaction mixture. The cold bath was removed, the mixture stirred for 20 minutes, then diluted with EtOAc. The layers were separated. The organic phase was washed with saturated aqueous NaHCO3 (2×), water, and brine, dried over Na2SO4, decanted, and concentrated under reduced pressure giving a dark amber oil. The residue was diluted with hexane and eluted through a short plug of silica with 25% EtOAc/hexane to 50% EtOAc/hexane. The desired filtrate was concentrated in vacuo giving 17 as a dark amber oil (182.9 g, 90% yield; 86% NMR purity). LCMS (C18 column eluting with 10-90% AcN/water gradient over 5 minutes with formic acid modifier) M+1: 260.12 (3.20 min). 1H NMR (300 MHz, CDCl3) δ 7.15 (dd, J=8.6, 7.6 Hz, 1H), 6.30 (dd, J=8.7, 1.3 Hz, 1H), 5.19-5.12 (m, 1H), 4.58 (s, 2H), 4.16-4.07 (m, 1H), 3.90-3.81 (m, 1H), 2.23-1.99 (m, 4H) ppm. maintaining a reaction temperature below about −15° C After complete addition 96% consumption of starting aniline Another 4.82 g NBS was added to the reaction mixture stirred at −10° C. for additional 30 minutes Aqueous 1 N Na2S2O3 (670 mL) was added to the reaction mixture The cold bath was removed the mixture stirred for 20 minutes diluted with EtOAc The layers were separated The organic phase was washed with saturated aqueous NaHCO3 (2×), water, and brine dried over Na2SO4 decanted concentrated under reduced pressure giving a dark amber oil eluted through a short plug of silica with 25% EtOAc/hexane to 50% EtOAc/hexane The desired filtrate was concentrated in vacuo

Conditions: temp:0.00; pressure:0.00; stir:; See reaction.notes.procedure_details.

Procedure: 5% Palladium on carbon (37.3 g, 50% wet, 8.76 mmol, Aldrich 330116) was placed in a Parr bottle under nitrogen, followed by MeOH (70 mL, JT-Baker 909333). The crude mixture of 2-(2-fluoro-6-nitro-phenyl)-2,3-dihydrofuran and 2-(2-fluoro-6-nitro-phenyl)-2,5-dihydrofuran (15A&15B) (186.6 g, 892.1 mmol) dissolved in MeOH (117 mL) was added to the Parr bottle, followed by NEt3 (124.3 mL, 892.1 mmol, Sigma-Aldrich 471283). The bottle was placed on a Parr shaker and saturated with H2. After adding 45 psi H2, the reaction mixture was shaken until consumption of the starting material was complete (HPLC and LCMS showed complete reaction). The reaction mixture was purged with nitrogen, filtered through Celite™ and rinsed with EtOAc. The filtrate was concentrated on a rotary evaporator giving brown oil, which was dissolved in Et2O and washed with water (2×). The ether phase was extracted with aqueous 1 N HCl (5×250 mL), which was washed with Et2O (3×) and then basified with aqueous 6 N NaOH to pH 12-14. The basic aqueous phase was extracted with dichloromethane (CH2Cl2, 4×), and the combined organic extract was washed with saturated aqueous NH4Cl, dried over MgSO4, and filtered through a pad of silica eluting with CH2Cl2 to 25% EtOAc/hexane. The desired filtrate was concentrated under reduced pressure giving 16 as a light brown oil (121.8 g, 84% GCMS plus NMR purity). GCMS (Agilent HP-5MS 30 m×250 μm×0.25 μm column heating at 60° C. for 2 min to 300° C. over 15 min with a 1 mL/min flow rate) M+1: 182.0 (11.44 min). LCMS (C18 column eluting with 10-90% CH3CN/water gradient over 5 minutes with formic acid modifier) M+1: 182.10 (2.61 min). 1H NMR (300 MHz, CDCl3) δ 6.97 (td, J=8.1, 6.3 Hz, 1H), 6.43-6.35 (m, 2H), 5.21-5.13 (m, 1H), 4.54 (s, 2H), 4.16-4.07 (m, 1H), 3.90-3.81 (m, 1H), 2.23-2.00 (m, 4H) ppm. Additional crops were obtained as follows: the combined ether phase was washed with saturated aqueous NaHCO3, brine, dried over Na2SO4, decanted, and concentrated under reduced pressure. The oil was vacuum distilled (ca. 15 ton) collecting the distillate at 101-108° C. To a stirring solution of the distilled oil in EtOH (1 volume) at 2° C. was slowly added 5 M HCl (1 eq) in iPrOH. The resulting suspension was brought to room temperature, diluted with EtOAc (3 volumes, vol/vol), and stirred for 2 hrs. A white solid was collected by filtration, washed with EtOAc, and dried under reduced pressure giving a second crop of product as the HCl salt. The mother liquor was concentrated to a slurry, diluted with EtOAc and the solid collected by filtration, washed with EtOAc, and dried in vacuo giving the HCl salt as a third crop of the product. LCMS (C18 column eluting with 10-90% CH3CN/water gradient over 5 minutes with formic acid modifier) M+1: 182.10 (2.58 min). 1H NMR (300 MHz, CDCl3) δ 10.73 (br.s, 3H), 7.66 (d, J=8.1 Hz, 1H), 7.33 (td, J=8.2, 5.9 Hz, 1H), 7.13-7.05 (m, 1H), 5.26 (dd, J=9.0, 6.5 Hz, 1H), 4.38-4.28 (m, 1H), 4.00-3.91 (m, 1H), 2.59-2.46 (m, 1H), 2.30-1.95 (m, 3H) ppm. The overall yield from the three crops was 76%. was added to the Parr bottle After adding 45 psi H2 (HPLC and LCMS showed complete reaction) The reaction mixture was purged with nitrogen filtered through Celite™ rinsed with EtOAc The filtrate was concentrated on a rotary evaporator giving brown oil, which washed with water (2×) The ether phase was extracted with aqueous 1 N HCl (5×250 mL), which was washed with Et2O (3×) The basic aqueous phase was extracted with dichloromethane (CH2Cl2, 4×) the combined organic extract was washed with saturated aqueous NH4Cl dried over MgSO4 filtered through a pad of silica eluting with CH2Cl2 to 25% EtOAc/hexane The desired filtrate was concentrated under reduced pressure

Conditions: temp:0.00; pressure:0.00; stir:; See reaction.notes.procedure_details.

Procedure: 5% Palladium on carbon (37.3 g, 50% wet, 8.76 mmol, Aldrich 330116) was placed in a Parr bottle under nitrogen, followed by MeOH (70 mL, JT-Baker 909333). The crude mixture of 2-(2-fluoro-6-nitro-phenyl)-2,3-dihydrofuran and 2-(2-fluoro-6-nitro-phenyl)-2,5-dihydrofuran (15A&15B) (186.6 g, 892.1 mmol) dissolved in MeOH (117 mL) was added to the Parr bottle, followed by NEt3 (124.3 mL, 892.1 mmol, Sigma-Aldrich 471283). The bottle was placed on a Parr shaker and saturated with H2. After adding 45 psi H2, the reaction mixture was shaken until consumption of the starting material was complete (HPLC and LCMS showed complete reaction). The reaction mixture was purged with nitrogen, filtered through Celite™ and rinsed with EtOAc. The filtrate was concentrated on a rotary evaporator giving brown oil, which was dissolved in Et2O and washed with water (2×). The ether phase was extracted with aqueous 1 N HCl (5×250 mL), which was washed with Et2O (3×) and then basified with aqueous 6 N NaOH to pH 12-14. The basic aqueous phase was extracted with dichloromethane (CH2Cl2, 4×), and the combined organic extract was washed with saturated aqueous NH4Cl, dried over MgSO4, and filtered through a pad of silica eluting with CH2Cl2 to 25% EtOAc/hexane. The desired filtrate was concentrated under reduced pressure giving 16 as a light brown oil (121.8 g, 84% GCMS plus NMR purity). GCMS (Agilent HP-5MS 30 m×250 μm×0.25 μm column heating at 60° C. for 2 min to 300° C. over 15 min with a 1 mL/min flow rate) M+1: 182.0 (11.44 min). LCMS (C18 column eluting with 10-90% CH3CN/water gradient over 5 minutes with formic acid modifier) M+1: 182.10 (2.61 min). 1H NMR (300 MHz, CDCl3) δ 6.97 (td, J=8.1, 6.3 Hz, 1H), 6.43-6.35 (m, 2H), 5.21-5.13 (m, 1H), 4.54 (s, 2H), 4.16-4.07 (m, 1H), 3.90-3.81 (m, 1H), 2.23-2.00 (m, 4H) ppm. Additional crops were obtained as follows: the combined ether phase was washed with saturated aqueous NaHCO3, brine, dried over Na2SO4, decanted, and concentrated under reduced pressure. The oil was vacuum distilled (ca. 15 ton) collecting the distillate at 101-108° C. To a stirring solution of the distilled oil in EtOH (1 volume) at 2° C. was slowly added 5 M HCl (1 eq) in iPrOH. The resulting suspension was brought to room temperature, diluted with EtOAc (3 volumes, vol/vol), and stirred for 2 hrs. A white solid was collected by filtration, washed with EtOAc, and dried under reduced pressure giving a second crop of product as the HCl salt. The mother liquor was concentrated to a slurry, diluted with EtOAc and the solid collected by filtration, washed with EtOAc, and dried in vacuo giving the HCl salt as a third crop of the product. LCMS (C18 column eluting with 10-90% CH3CN/water gradient over 5 minutes with formic acid modifier) M+1: 182.10 (2.58 min). 1H NMR (300 MHz, CDCl3) δ 10.73 (br.s, 3H), 7.66 (d, J=8.1 Hz, 1H), 7.33 (td, J=8.2, 5.9 Hz, 1H), 7.13-7.05 (m, 1H), 5.26 (dd, J=9.0, 6.5 Hz, 1H), 4.38-4.28 (m, 1H), 4.00-3.91 (m, 1H), 2.59-2.46 (m, 1H), 2.30-1.95 (m, 3H) ppm. The overall yield from the three crops was 76%. was added to the Parr bottle After adding 45 psi H2 (HPLC and LCMS showed complete reaction) The reaction mixture was purged with nitrogen filtered through Celite™ rinsed with EtOAc The filtrate was concentrated on a rotary evaporator giving brown oil, which washed with water (2×) The ether phase was extracted with aqueous 1 N HCl (5×250 mL), which was washed with Et2O (3×) The basic aqueous phase was extracted with dichloromethane (CH2Cl2, 4×) the combined organic extract was washed with saturated aqueous NH4Cl dried over MgSO4 filtered through a pad of silica eluting with CH2Cl2 to 25% EtOAc/hexane The desired filtrate was concentrated under reduced pressure

Conditions: temp:0.00; pressure:0.00; stir:; See reaction.notes.procedure_details.

Procedure: To a stirring solution of 3-fluoro-2-tetrahydrofuran-2-yl-aniline (16) (131.9 g, 92%, 669.7 mmol) in methyl tert-butyl ether (1.456 L) and acetonitrile (485 mL) cooled to −20° C. was added N-bromosuccinimide (120.4 g, 99%, 669.7 mmol, Aldrich B81255) in 3 portions maintaining a reaction temperature below about −15° C. After complete addition stirring was continued at −15 to −10° C. for 30 minutes. 1H NMR of a worked-up aliquot showed 96% consumption of starting aniline so added another 4.82 g NBS and stirred at −10° C. for another 30 minutes. Aqueous 1 N Na2S2O3 (670 mL) was added to the reaction mixture. The cold bath was removed, the mixture stirred for 20 minutes, then diluted with EtOAc. The layers were separated and the organic phase was washed with saturated aqueous NaHCO3 (2×), water, brine, dried over Na2SO4, decanted, and concentrated under reduced pressure giving a dark amber oil. The residue was diluted with hexane and eluted through a short plug of silica eluting with 25% EtOAc/hexane to 50% EtOAc/hexane. The desired filtrate was concentrated in vacuo giving 17 as a dark amber oil (182.9 g, 90% yield; 86% NMR purity). LCMS (C18 column eluting with 10-90% CH3CN/water gradient over 5 minutes with formic acid modifier) M+1: 260.12 (3.20 min). 1H NMR (300 MHz, CDCl3) δ 7.15 (dd, J=8.6, 7.6 Hz, 1H), 6.30 (dd, J=8.7, 1.3 Hz, 1H), 5.19-5.12 (m, 1H), 4.58 (s, 2H), 4.16-4.07 (m, 1H), 3.90-3.81 (m, 1H), 2.23-1.99 (m, 4H) ppm. maintaining a reaction temperature below about −15° C After complete addition 96% consumption of starting aniline so added another 4.82 g NBS stirred at −10° C. for another 30 minutes Aqueous 1 N Na2S2O3 (670 mL) was added to the reaction mixture The cold bath was removed the mixture stirred for 20 minutes diluted with EtOAc The layers were separated the organic phase was washed with saturated aqueous NaHCO3 (2×), water, brine dried over Na2SO4 decanted concentrated under reduced pressure giving a dark amber oil eluted through a short plug of silica eluting with 25% EtOAc/hexane to 50% EtOAc/hexane The desired filtrate was concentrated in vacuo

Conditions: temp:0.00; pressure:0.00; stir:; See reaction.notes.procedure_details.

Procedure: Placed 5% palladium on carbon (37.3 g, 50% wet, 8.76 mmol, Aldrich 330116) in a Parr bottle under nitrogen, followed by MeOH (70 mL, JT-Baker 909333). Added the crude mixture of 2-(2-fluoro-6-nitro-phenyl)-2,3-dihydrofuran and 2-(2-fluoro-6-nitro-phenyl)-2,5-dihydrofuran (15A&15B) (186.6 g, 892.1 mmol) dissolved in MeOH (117 mL), followed by NEt3 (124.3 mL, 892.1 mmol, Sigma-Aldrich 471283). Placed the vessel on a Parr shaker and saturated with H2. After adding 45 psi H2, the reaction mixture was shaken until consumption of the starting material was complete (HPLC and LCMS showed complete reaction). The reaction mixture was purged with nitrogen, filtered through Celite™ and rinsed with EtOAc. The filtrate was concentrated on a rotary evaporator giving a brown oil, which was dissolved in Et2O and washed with water (2×). The ether phase was extracted with aqueous 1 N HCl (5×250 mL), which was washed with Et2O (3×) and then basified with aqueous 6 N NaOH to pH 12-14. The basic aqueous phase was extracted with CH2Cl2(4×), and the combined organic extract washed with saturated aqueous NH4Cl, dried over MgSO4, and filtered through a pad of silica eluting with CH2Cl2 to 25% EtOAc/hexane. The desired filtrate was concentrated under reduced pressure giving 16 as a light brown oil (121.8 g, 84% GCMS plus NMR purity). GCMS (Agilent HP-5MS 30 m×250 μm×0.25 μm column heating at 60° C. for 2 min to 300° C. over 15 min with a 1 mL/min flow rate) M+1: 182.0 (11.44 min). LCMS (C18 column eluting with 10-90% CH3CN/water gradient over 5 minutes with formic acid modifier) M+1: 182.10 (2.61 min). 1H NMR (300 MHz, CDCl3) δ 6.97 (td, J=8A, 6.3 Hz, 1H), 6.43-6.35 (m, 2H), 5.21-5.13 (m, 1H), 4.54 (s, 2H), 4.16-4.07 (m, 1H), 3.90-3.81 (m, 1H), 2.23-2.00 (m, 4H) ppm. Additional crops were obtained as follows: the combined ether phase was washed with saturated aqueous NaHCO3, brine, dried over Na2SO4, decanted, and concentrated under reduced pressure. The oil was vacuum distilled (ca. 15 torr) collecting the distillate at 101-108° C. To a stirring solution of the distilled oil in EtOH (1 volume) at 2° C. was slowly added 5 M HCl (1 eq) in iPrOH. The resulting suspension was brought to room temperature, diluted with EtOAc (3 volumes, vol/vol), and stirred for 2 hrs. The white solid was collected by filtration, washed with EtOAc, and dried under reduced pressure giving a second crop of product as the HCl salt. The mother liquor was concentrated to a slurry, diluted with EtOAc and the solid collected by filtration, washed with EtOAc, and dried in vacuo giving the HCl salt as a third crop of the product. LCMS (C18 column eluting with 10-90% CH3CN/water gradient over 5 minutes with formic acid modifier) M+1: 182.10 (2.58 min). 1H NMR (300 MHz, CDCl3) δ 10.73 (br.s, 3H), 7.66 (d, J8.1 Hz, 1H), 7.33 (td, J8.2, 5.9 Hz, 1H), 7.13-7.05 (m, 1H), 5.26 (dd, J=9.0, 6.5 Hz, 1H), 4.38-4.28 (m, 1H), 4.00-3.91 (m, 1H), 2.59-2.46 (m, 1H), 2.30-1.95 (m, 3H) ppm. The overall yield from the three crops was 76%. Added the crude After adding 45 psi H2 (HPLC and LCMS showed complete reaction) The reaction mixture was purged with nitrogen filtered through Celite™ rinsed with EtOAc The filtrate was concentrated on a rotary evaporator giving a brown oil, which washed with water (2×) The ether phase was extracted with aqueous 1 N HCl (5×250 mL), which was washed with Et2O (3×) The basic aqueous phase was extracted with CH2Cl2(4×) the combined organic extract washed with saturated aqueous NH4Cl dried over MgSO4 filtered through a pad of silica eluting with CH2Cl2 to 25% EtOAc/hexane The desired filtrate was concentrated under reduced pressure

Conditions: temp:0.00; pressure:0.00; stir:; See reaction.notes.procedure_details.

Procedure: To a stirring solution of 3-fluoro-2-tetrahydrofuran-2-yl-aniline (16) (131.9 g, 92%, 669.7 mmol) in methyl tert-butyl ether (1.456 L) and acetonitrile (485 mL) cooled to −20° C. was added N-bromosuccinimide (120.4 g, 99%, 669.7 mmol, Aldrich B81255) in 3 portions maintaining a reaction temperature below about −15° C. After complete addition, stirring was continued at −15 to −10° C. for 30 minutes. 1H NMR of a worked-up aliquot showed 96% consumption of starting aniline. Another 4.82 g NBS was added to the reaction mixture and stirred at −10° C. for additional 30 minutes. Aqueous 1 N Na2S2O3 (670 mL) was added to the reaction mixture. The cold bath was removed, the mixture stirred for 20 minutes, then diluted with EtOAc. The layers were separated. The organic phase was washed with saturated aqueous NaHCO3 (2×), water, and brine, dried over Na2SO4, decanted, and concentrated under reduced pressure giving a dark amber oil. The residue was diluted with hexane and eluted through a short plug of silica with 25% EtOAc/hexane to 50% EtOAc/hexane. The desired filtrate was concentrated in vacuo giving 17 as a dark amber oil (182.9 g, 90% yield; 86% NMR purity). LCMS (C18 column eluting with 10-90% AcN/water gradient over 5 minutes with formic acid modifier) M+1: 260.12 (3.20 min). 1H NMR (300 MHz, CDCl3) δ 7.15 (dd, J=8.6, 7.6 Hz, 1H), 6.30 (dd, J=8.7, 1.3 Hz, 1H), 5.19-5.12 (m, 1H), 4.58 (s, 2H), 4.16-4.07 (m, 1H), 3.90-3.81 (m, 1H), 2.23-1.99 (m, 4H) ppm. maintaining a reaction temperature below about −15° C After complete addition 96% consumption of starting aniline Another 4.82 g NBS was added to the reaction mixture stirred at −10° C. for additional 30 minutes Aqueous 1 N Na2S2O3 (670 mL) was added to the reaction mixture The cold bath was removed the mixture stirred for 20 minutes diluted with EtOAc The layers were separated The organic phase was washed with saturated aqueous NaHCO3 (2×), water, and brine dried over Na2SO4 decanted concentrated under reduced pressure giving a dark amber oil eluted through a short plug of silica with 25% EtOAc/hexane to 50% EtOAc/hexane The desired filtrate was concentrated in vacuo

Conditions: temp:0.00; pressure:0.00; stir:; See reaction.notes.procedure_details.

Procedure: 5% Palladium on carbon (37.3 g, 50% wet, 8.76 mmol, Aldrich 330116) was placed in a Parr bottle under nitrogen, followed by MeOH (70 mL, JT-Baker 909333). The crude mixture of 2-(2-fluoro-6-nitro-phenyl)-2,3-dihydrofuran and 2-(2-fluoro-6-nitro-phenyl)-2,5-dihydrofuran (15A&15B) (186.6 g, 892.1 mmol) dissolved in MeOH (117 mL) was added to the Parr bottle, followed by NEt3 (124.3 mL, 892.1 mmol, Sigma-Aldrich 471283). The bottle was placed on a Parr shaker and saturated with H2. After adding 45 psi H2, the reaction mixture was shaken until consumption of the starting material was complete (HPLC and LCMS showed complete reaction). The reaction mixture was purged with nitrogen, filtered through Celite™ and rinsed with EtOAc. The filtrate was concentrated on a rotary evaporator giving brown oil, which was dissolved in Et2O and washed with water (2×). The ether phase was extracted with aqueous 1 N HCl (5×250 mL), which was washed with Et2O (3×) and then basified with aqueous 6 N NaOH to pH 12-14. The basic aqueous phase was extracted with dichloromethane (CH2Cl2, 4×), and the combined organic extract was washed with saturated aqueous NH4Cl, dried over MgSO4, and filtered through a pad of silica eluting with CH2Cl2 to 25% EtOAc/hexane. The desired filtrate was concentrated under reduced pressure giving 16 as a light brown oil (121.8 g, 84% GCMS plus NMR purity). GCMS (Agilent HP-5MS 30 m×250 μm×0.25 μm column heating at 60° C. for 2 min to 300° C. over 15 min with a 1 mL/min flow rate) M+1: 182.0 (11.44 min). LCMS (C18 column eluting with 10-90% CH3CN/water gradient over 5 minutes with formic acid modifier) M+1: 182.10 (2.61 min). 1H NMR (300 MHz, CDCl3) δ 6.97 (td, J=8.1, 6.3 Hz, 1H), 6.43-6.35 (m, 2H), 5.21-5.13 (m, 1H), 4.54 (s, 2H), 4.16-4.07 (m, 1H), 3.90-3.81 (m, 1H), 2.23-2.00 (m, 4H) ppm. Additional crops were obtained as follows: the combined ether phase was washed with saturated aqueous NaHCO3, brine, dried over Na2SO4, decanted, and concentrated under reduced pressure. The oil was vacuum distilled (ca. 15 ton) collecting the distillate at 101-108° C. To a stirring solution of the distilled oil in EtOH (1 volume) at 2° C. was slowly added 5 M HCl (1 eq) in iPrOH. The resulting suspension was brought to room temperature, diluted with EtOAc (3 volumes, vol/vol), and stirred for 2 hrs. A white solid was collected by filtration, washed with EtOAc, and dried under reduced pressure giving a second crop of product as the HCl salt. The mother liquor was concentrated to a slurry, diluted with EtOAc and the solid collected by filtration, washed with EtOAc, and dried in vacuo giving the HCl salt as a third crop of the product. LCMS (C18 column eluting with 10-90% CH3CN/water gradient over 5 minutes with formic acid modifier) M+1: 182.10 (2.58 min). 1H NMR (300 MHz, CDCl3) δ 10.73 (br.s, 3H), 7.66 (d, J=8.1 Hz, 1H), 7.33 (td, J=8.2, 5.9 Hz, 1H), 7.13-7.05 (m, 1H), 5.26 (dd, J=9.0, 6.5 Hz, 1H), 4.38-4.28 (m, 1H), 4.00-3.91 (m, 1H), 2.59-2.46 (m, 1H), 2.30-1.95 (m, 3H) ppm. The overall yield from the three crops was 76%. was added to the Parr bottle After adding 45 psi H2 (HPLC and LCMS showed complete reaction) The reaction mixture was purged with nitrogen filtered through Celite™ rinsed with EtOAc The filtrate was concentrated on a rotary evaporator giving brown oil, which washed with water (2×) The ether phase was extracted with aqueous 1 N HCl (5×250 mL), which was washed with Et2O (3×) The basic aqueous phase was extracted with dichloromethane (CH2Cl2, 4×) the combined organic extract was washed with saturated aqueous NH4Cl dried over MgSO4 filtered through a pad of silica eluting with CH2Cl2 to 25% EtOAc/hexane The desired filtrate was concentrated under reduced pressure

Conditions: temp:0.00; pressure:0.00; stir:; See reaction.notes.procedure_details.

Procedure: 5% Palladium on carbon (37.3 g, 50% wet, 8.76 mmol, Aldrich 330116) was placed in a Parr bottle under nitrogen, followed by MeOH (70 mL, JT-Baker 909333). The crude mixture of 2-(2-fluoro-6-nitro-phenyl)-2,3-dihydrofuran and 2-(2-fluoro-6-nitro-phenyl)-2,5-dihydrofuran (15A&15B) (186.6 g, 892.1 mmol) dissolved in MeOH (117 mL) was added to the Parr bottle, followed by NEt3 (124.3 mL, 892.1 mmol, Sigma-Aldrich 471283). The bottle was placed on a Parr shaker and saturated with H2. After adding 45 psi H2, the reaction mixture was shaken until consumption of the starting material was complete (HPLC and LCMS showed complete reaction). The reaction mixture was purged with nitrogen, filtered through Celite™ and rinsed with EtOAc. The filtrate was concentrated on a rotary evaporator giving brown oil, which was dissolved in Et2O and washed with water (2×). The ether phase was extracted with aqueous 1 N HCl (5×250 mL), which was washed with Et2O (3×) and then basified with aqueous 6 N NaOH to pH 12-14. The basic aqueous phase was extracted with dichloromethane (CH2Cl2, 4×), and the combined organic extract was washed with saturated aqueous NH4Cl, dried over MgSO4, and filtered through a pad of silica eluting with CH2Cl2 to 25% EtOAc/hexane. The desired filtrate was concentrated under reduced pressure giving 16 as a light brown oil (121.8 g, 84% GCMS plus NMR purity). GCMS (Agilent HP-5MS 30 m×250 μm×0.25 μm column heating at 60° C. for 2 min to 300° C. over 15 min with a 1 mL/min flow rate) M+1: 182.0 (11.44 min). LCMS (C18 column eluting with 10-90% CH3CN/water gradient over 5 minutes with formic acid modifier) M+1: 182.10 (2.61 min). 1H NMR (300 MHz, CDCl3) δ 6.97 (td, J=8.1, 6.3 Hz, 1H), 6.43-6.35 (m, 2H), 5.21-5.13 (m, 1H), 4.54 (s, 2H), 4.16-4.07 (m, 1H), 3.90-3.81 (m, 1H), 2.23-2.00 (m, 4H) ppm. Additional crops were obtained as follows: the combined ether phase was washed with saturated aqueous NaHCO3, brine, dried over Na2SO4, decanted, and concentrated under reduced pressure. The oil was vacuum distilled (ca. 15 ton) collecting the distillate at 101-108° C. To a stirring solution of the distilled oil in EtOH (1 volume) at 2° C. was slowly added 5 M HCl (1 eq) in iPrOH. The resulting suspension was brought to room temperature, diluted with EtOAc (3 volumes, vol/vol), and stirred for 2 hrs. A white solid was collected by filtration, washed with EtOAc, and dried under reduced pressure giving a second crop of product as the HCl salt. The mother liquor was concentrated to a slurry, diluted with EtOAc and the solid collected by filtration, washed with EtOAc, and dried in vacuo giving the HCl salt as a third crop of the product. LCMS (C18 column eluting with 10-90% CH3CN/water gradient over 5 minutes with formic acid modifier) M+1: 182.10 (2.58 min). 1H NMR (300 MHz, CDCl3) δ 10.73 (br.s, 3H), 7.66 (d, J=8.1 Hz, 1H), 7.33 (td, J=8.2, 5.9 Hz, 1H), 7.13-7.05 (m, 1H), 5.26 (dd, J=9.0, 6.5 Hz, 1H), 4.38-4.28 (m, 1H), 4.00-3.91 (m, 1H), 2.59-2.46 (m, 1H), 2.30-1.95 (m, 3H) ppm. The overall yield from the three crops was 76%. was added to the Parr bottle After adding 45 psi H2 (HPLC and LCMS showed complete reaction) The reaction mixture was purged with nitrogen filtered through Celite™ rinsed with EtOAc The filtrate was concentrated on a rotary evaporator giving brown oil, which washed with water (2×) The ether phase was extracted with aqueous 1 N HCl (5×250 mL), which was washed with Et2O (3×) The basic aqueous phase was extracted with dichloromethane (CH2Cl2, 4×) the combined organic extract was washed with saturated aqueous NH4Cl dried over MgSO4 filtered through a pad of silica eluting with CH2Cl2 to 25% EtOAc/hexane The desired filtrate was concentrated under reduced pressure

Conditions: temp:0.00; pressure:0.00; stir:; See reaction.notes.procedure_details.

Procedure: To a stirring solution of 3-fluoro-2-tetrahydrofuran-2-yl-aniline (16) (131.9 g, 92%, 669.7 mmol) in methyl tert-butyl ether (1.456 L) and acetonitrile (485 mL) cooled to −20° C. was added N-bromosuccinimide (120.4 g, 99%, 669.7 mmol, Aldrich B81255) in 3 portions maintaining a reaction temperature below about −15° C. After complete addition stirring was continued at −15 to −10° C. for 30 minutes. 1H NMR of a worked-up aliquot showed 96% consumption of starting aniline so added another 4.82 g NBS and stirred at −10° C. for another 30 minutes. Aqueous 1N Na2S2O3 (670 mL) was added to the reaction mixture. The cold bath was removed, the mixture stirred for 20 minutes, then diluted with EtOAc. The layers were separated and the organic phase was washed with saturated aqueous NaHCO3 (2×), water, brine, dried over Na2SO4, decanted, and concentrated under reduced pressure giving a dark amber oil. The residue was diluted with hexane and eluted through a short plug of silica eluting with 25% EtOAc/hexane to 50% EtOAc/hexane. The desired filtrate was concentrated in vacuo giving 17 as a dark amber oil (182.9 g, 90% yield; 86% NMR purity). LCMS (C18 column eluting with 10-90% CH3CN/water gradient over 5 minutes with formic acid modifier) M+1: 260.12 (3.20 min). 1H NMR (300 MHz, CDCl3) δ 7.15 (dd, J=8.6, 7.6 Hz, 1H), 6.30 (dd, J=8.7, 1.3 Hz, 1H), 5.19-5.12 (m, 1H), 4.58 (s, 2H), 4.16-4.07 (m, 1H), 3.90-3.81 (m, 1H), 2.23-1.99 (m, 4H) ppm. maintaining a reaction temperature below about −15° C After complete addition 96% consumption of starting aniline so added another 4.82 g NBS stirred at −10° C. for another 30 minutes Aqueous 1N Na2S2O3 (670 mL) was added to the reaction mixture The cold bath was removed the mixture stirred for 20 minutes diluted with EtOAc The layers were separated the organic phase was washed with saturated aqueous NaHCO3 (2×), water, brine dried over Na2SO4 decanted concentrated under reduced pressure giving a dark amber oil eluted through a short plug of silica eluting with 25% EtOAc/hexane to 50% EtOAc/hexane The desired filtrate was concentrated in vacuo