4-bromo-2-(oxolan-2-yl)aniline

Conditions: temp:0.00; pressure:0.00; stir:; See reaction.notes.procedure_details.

Procedure: To a stirring solution of 2-tetrahydrofuran-2-yl-aniline (4) (53.45 g, 327.5 mmol) in methyl tert-butyl ether (MTBE, 641.4 mL) and acetonitrile (213.8 mL) cooled to 2° C. was added N-bromosuccinimide (58.88 g, 99%, 327.5 mmol, Aldrich B81255) in 4 portions maintaining internal temperature below about 8° C. The reaction mixture was stirred while cooling with an ice-water bath for 30 minutes (NMR of a worked-up aliquot showed complete consumption of starting material). Added aqueous 1 N Na2S2O3 (330 mL), removed the cold bath and stirred for 20 minutes. The mixture was diluted with EtOAc and the layers were separated. The organic phase was washed with saturated aqueous NaHCO3 (2×), water, brine, dried over MgSO4, filtered through a short plug of silica, eluted with EtOAc, and concentrated under reduced pressure to give (5) as a very dark amber oil (82.25 g, 77-94% HPLC purity). Carried forward without further purification. LCMS (C18 column eluting with 10-90% CH3CN/water gradient over 5 minutes with formic acid modifier) M+1: 242.10 (2.89 min). 1H NMR (300 MHz, CDCl3) δ 7.22 (d, J=2.3 Hz, 1H), 7.16 (dd, J=8.4, 2.3 Hz, 1H), 6.54 (d, J=8.4 Hz, 1H), 4.79-4.73 (m, 1H), 4.15 (s, 2H), 4.10-4.01 (m, 1H), 3.93-3.85 (m, 1H), 2.26-2.13 (m, 1H), 2.12-1.97 (m, 3H) ppm. maintaining internal temperature below about 8° C while cooling with an ice-water bath for 30 minutes (NMR of complete consumption of starting material) Added aqueous 1 N Na2S2O3 (330 mL), removed the cold bath stirred for 20 minutes The mixture was diluted with EtOAc the layers were separated The organic phase was washed with saturated aqueous NaHCO3 (2×), water, brine dried over MgSO4 filtered through a short plug of silica eluted with EtOAc concentrated under reduced pressure

Conditions: temp:0.00; pressure:0.00; stir:; See reaction.notes.procedure_details.

Procedure: To a stirring solution of 2-tetrahydrofuran-2-yl-aniline (4) (53.45 g, 327.5 mmol) in methyl tert-butyl ether (MTBE, 641.4 mL) and acetonitrile (213.8 mL) cooled to 2° C. was added N-bromosuccinimide (58.88 g, 99%, 327.5 mmol, Aldrich B81255) in 4 portions maintaining internal temperature below about 8° C. The reaction mixture was stirred while cooling with an ice-water bath for 30 minutes (NMR of a worked-up aliquot showed complete consumption of starting material). Added aqueous 1 N Na2S2O3 (330 mL), removed the cold bath and stirred for 20 minutes. The mixture was diluted with EtOAc and the layers were separated. The organic phase was washed with saturated aqueous NaHCO3 (2×), water, brine, dried over MgSO4, filtered through a short plug of silica, eluted with EtOAc, and concentrated under reduced pressure to give (5) as a very dark amber oil (82.25 g, 77-94% HPLC purity). Carried forward without further purification. LCMS (C18 column eluting with 10-90% CH3CN/water gradient over 5 minutes with formic acid modifier) M+1: 242.10 (2.89 min). 1H NMR (300 MHz, CDCl3) δ 7.22 (d, J=2.3 Hz, 1H), 7.16 (dd, J=8.4, 2.3 Hz, 1H), 6.54 (d, J=8.4 Hz, 1H), 4.79-4.73 (m, 1H), 4.15 (s, 2H), 4.10-4.01 (m, 1H), 3.93-3.85 (m, 1H), 2.26-2.13 (m, 1H), 2.12-1.97 (m, 3H) ppm. maintaining internal temperature below about 8° C while cooling with an ice-water bath for 30 minutes (NMR of complete consumption of starting material) Added aqueous 1 N Na2S2O3 (330 mL), removed the cold bath stirred for 20 minutes The mixture was diluted with EtOAc the layers were separated The organic phase was washed with saturated aqueous NaHCO3 (2×), water, brine dried over MgSO4 filtered through a short plug of silica eluted with EtOAc concentrated under reduced pressure

Conditions: temp:0.00; pressure:0.00; stir:; See reaction.notes.procedure_details.

Procedure: To a stirring solution of 2-tetrahydrofuran-2-yl-aniline (4) (53.45 g, 327.5 mmol) in methyl tert-butyl ether (MTBE, 641.4 mL) and acetonitrile (213.8 mL) cooled to 2° C. was added N-bromosuccinimide (NBS, 58.88 g, 99%, 327.5 mmol, Aldrich B81255) in 4 portions maintaining internal temperature below about 8° C. The reaction mixture was stirred while cooling with an ice-water bath for 30 minutes (NMR of a worked-up aliquot showed complete consumption of starting material). Aqueous 1 N Na2S2O3 (330 mL) was added to the reaction mixture, removed the cold bath and stirred for 20 minutes. The mixture was diluted with EtOAc and the layers were separated. The organic phase was washed with saturated aqueous NaHCO3 (2×), water, brine, dried over MgSO4, filtered through a short plug of silica, eluted with EtOAc, and concentrated under reduced pressure to give (5) as a very dark amber oil (82.25 g, 77-94% HPLC purity). Carried forward without further purification. LCMS (C18 column eluting with 10-90% CH3CN/water gradient over 5 minutes with formic acid modifier) M+1: 242.10 (2.89 min). 1H NMR (300 MHz, CDCl3) δ 7.22 (d, J=2.3 Hz, 1H), 7.16 (dd, J=8.4, 2.3 Hz, 1H), 6.54 (d, J=8.4 Hz, 1H), 4.79-4.73 (m, 1H), 4.15 (s, 2H), 4.10-4.01 (m, 1H), 3.93-3.85 (m, 1H), 2.26-2.13 (m, 1H), 2.12-1.97 (m, 3H) ppm. maintaining internal temperature below about 8° C while cooling with an ice-water bath for 30 minutes (NMR of complete consumption of starting material) Aqueous 1 N Na2S2O3 (330 mL) was added to the reaction mixture removed the cold bath stirred for 20 minutes The mixture was diluted with EtOAc the layers were separated The organic phase was washed with saturated aqueous NaHCO3 (2×), water, brine dried over MgSO4 filtered through a short plug of silica eluted with EtOAc concentrated under reduced pressure

Conditions: temp:0.00; pressure:0.00; stir:; See reaction.notes.procedure_details.

Procedure: To a stirring solution of 2-tetrahydrofuran-2-yl-aniline (4) (53.45 g, 327.5 mmol) in methyl tert-butyl ether (MTBE, 641.4 mL) and acetonitrile (213.8 mL) cooled to 2° C. was added N-bromosuccinimide (58.88 g, 99%, 327.5 mmol, Aldrich B81255) in 4 portions maintaining internal temperature below about 8° C. The reaction mixture was stirred while cooling with an ice-water bath for 30 minutes (NMR of a worked-up aliquot showed complete consumption of starting material). Added aqueous 1 N Na2S2O3 (330 mL), removed the cold bath and stirred for 20 minutes. The mixture was diluted with EtOAc and the layers were separated. The organic phase was washed with saturated aqueous NaHCO3 (2×), water, brine, dried over MgSO4, filtered through a short plug of silica, eluted with EtOAc, and concentrated under reduced pressure to give (5) as a very dark amber oil (82.25 g, 77-94% HPLC purity). Carried forward without further purification. LCMS (C18 column eluting with 10-90% CH3CN/water gradient over 5 minutes with formic acid modifier) M+1: 242.10 (2.89 min). 1H NMR (300 MHz, CDCl3) δ 7.22 (d, J=2.3 Hz, 1H), 7.16 (dd, J=8.4, 2.3 Hz, 1H), 6.54 (d, J=8.4 Hz, 1H), 4.79-4.73 (m, 1H), 4A5 (s, 2H), 4.10-4.01 (m, 1H), 3.93-3.85 (m, 1H), 2.26-2.13 (m, 1H), 2.12-1.97 (m, 3H) ppm. maintaining internal temperature below about 8° C while cooling with an ice-water bath for 30 minutes (NMR of complete consumption of starting material) Added aqueous 1 N Na2S2O3 (330 mL), removed the cold bath stirred for 20 minutes The mixture was diluted with EtOAc the layers were separated The organic phase was washed with saturated aqueous NaHCO3 (2×), water, brine dried over MgSO4 filtered through a short plug of silica eluted with EtOAc concentrated under reduced pressure

Conditions: temp:0.00; pressure:0.00; stir:; See reaction.notes.procedure_details.

Procedure: To a stirring solution of 2-tetrahydrofuran-2-yl-aniline (4) (53.45 g, 327.5 mmol) in methyl tert-butyl ether (MTBE, 641.4 mL) and acetonitrile (213.8 mL) cooled to 2° C. was added N-bromosuccinimide (NBS, 58.88 g, 99%, 327.5 mmol, Aldrich B81255) in 4 portions maintaining internal temperature below about 8° C. The reaction mixture was stirred while cooling with an ice-water bath for 30 minutes (NMR of a worked-up aliquot showed complete consumption of starting material). Aqueous 1 N Na2S2O3 (330 mL) was added to the reaction mixture, removed the cold bath and stirred for 20 minutes. The mixture was diluted with EtOAc and the layers were separated. The organic phase was washed with saturated aqueous NaHCO3 (2×), water, brine, dried over MgSO4, filtered through a short plug of silica, eluted with EtOAc, and concentrated under reduced pressure to give (5) as a very dark amber oil (82.25 g, 77-94% HPLC purity). Carried forward without further purification. LCMS (C18 column eluting with 10-90% CH3CN/water gradient over 5 minutes with formic acid modifier) M+1: 242.10 (2.89 min). 1H NMR (300 MHz, CDCl3) δ 7.22 (d, J=2.3 Hz, 1H), 7.16 (dd, J=8.4, 2.3 Hz, 1H), 6.54 (d, J=8.4 Hz, 1H), 4.79-4.73 (m, 1H), 4.15 (s, 2H), 4.10-4.01 (m, 1H), 3.93-3.85 (m, 1H), 2.26-2.13 (m, 1H), 2.12-1.97 (m, 3H) ppm. maintaining internal temperature below about 8° C while cooling with an ice-water bath for 30 minutes (NMR of complete consumption of starting material) Aqueous 1 N Na2S2O3 (330 mL) was added to the reaction mixture removed the cold bath stirred for 20 minutes The mixture was diluted with EtOAc the layers were separated The organic phase was washed with saturated aqueous NaHCO3 (2×), water, brine dried over MgSO4 filtered through a short plug of silica eluted with EtOAc concentrated under reduced pressure

Conditions: temp:0.00; pressure:0.00; stir:; See reaction.notes.procedure_details.

Procedure: To a stirring solution of 2-tetrahydrofuran-2-yl-aniline (4) (53.45 g, 327.5 mmol) in methyl tert-butyl ether (MTBE, 641.4 mL) and acetonitrile (213.8 mL) cooled to 2° C. was added N-bromosuccinimide (NBS, 58.88 g, 99%, 327.5 mmol, Aldrich B81255) in 4 portions maintaining internal temperature below about 8° C. The reaction mixture was stirred while cooling with an ice-water bath for 30 minutes (NMR of a worked-up aliquot showed complete consumption of starting material). Aqueous 1 N Na2S2O3 (330 mL) was added to the reaction mixture, removed the cold bath and stirred for 20 minutes. The mixture was diluted with EtOAc and the layers were separated. The organic phase was washed with saturated aqueous NaHCO3 (2×), water, brine, dried over MgSO4, filtered through a short plug of silica, eluted with EtOAc, and concentrated under reduced pressure to give (5) as a very dark amber oil (82.25 g, 77-94% HPLC purity). Carried forward without further purification. LCMS (C18 column eluting with 10-90% CH3CN/water gradient over 5 minutes with formic acid modifier) M+1: 242.10 (2.89 min). 1H NMR (300 MHz, CDCl3) δ 7.22 (d, J=2.3 Hz, 1H), 7.16 (dd, J=8.4, 2.3 Hz, 1H), 6.54 (d, J=8.4 Hz, 1H), 4.79-4.73 (m, 1H), 4.15 (s, 2H), 4.10-4.01 (m, 1H), 3.93-3.85 (m, 1H), 2.26-2.13 (m, 1H), 2.12-1.97 (m, 3H) ppm. maintaining internal temperature below about 8° C while cooling with an ice-water bath for 30 minutes (NMR of complete consumption of starting material) Aqueous 1 N Na2S2O3 (330 mL) was added to the reaction mixture removed the cold bath stirred for 20 minutes The mixture was diluted with EtOAc the layers were separated The organic phase was washed with saturated aqueous NaHCO3 (2×), water, brine dried over MgSO4 filtered through a short plug of silica eluted with EtOAc concentrated under reduced pressure

Conditions: temp:0.00; pressure:0.00; stir:; See reaction.notes.procedure_details.

Procedure: To a stirring solution of 2-tetrahydrofuran-2-yl-aniline (4) (53.45 g, 327.5 mmol) in methyl tert-butyl ether (MTBE, 641.4 mL) and acetonitrile (213.8 mL) cooled to 2° C. was added N-bromosuccinimide (58.88 g, 99%, 327.5 mmol, Aldrich B81255) in 4 portions maintaining internal temperature below about 8° C. The reaction mixture was stirred while cooling with an ice-water bath for 30 minutes (NMR of a worked-up aliquot showed complete consumption of starting material). Added aqueous 1 N Na2S2O3 (330 mL), removed the cold bath and stirred for 20 minutes. The mixture was diluted with EtOAc and the layers were separated. The organic phase was washed with saturated aqueous NaHCO3 (2×), water, brine, dried over MgSO4, filtered through a short plug of silica, eluted with EtOAc, and concentrated under reduced pressure to give (5) as a very dark amber oil (82.25 g, 77-94% HPLC purity). Carried forward without further purification. LCMS (C18 column eluting with 10-90% CH3CN/water gradient over 5 minutes with formic acid modifier) M+1: 242.10 (2.89 min). 1H NMR (300 MHz, CDCl3) δ 7.22 (d, J=2.3 Hz, 1H), 7.16 (dd, J=8.4, 2.3 Hz, 1H), 6.54 (d, J=8.4 Hz, 1H), 4.79-4.73 (m, 1H), 4.15 (s, 2H), 4.10-4.01 (m, 1H), 3.93-3.85 (m, 1H), 2.26-2.13 (m, 1H), 2.12-1.97 (m, 3H) ppm. maintaining internal temperature below about 8° C while cooling with an ice-water bath for 30 minutes (NMR of complete consumption of starting material) Added aqueous 1 N Na2S2O3 (330 mL), removed the cold bath stirred for 20 minutes The mixture was diluted with EtOAc the layers were separated The organic phase was washed with saturated aqueous NaHCO3 (2×), water, brine dried over MgSO4 filtered through a short plug of silica eluted with EtOAc concentrated under reduced pressure

Conditions: temp:0.00; pressure:0.00; stir:; See reaction.notes.procedure_details.

Procedure: To a stirring solution of 2-tetrahydrofuran-2-yl-aniline (4) (53.45 g, 327.5 mmol) in methyl tert-butyl ether (MTBE, 641.4 mL) and acetonitrile (213.8 mL) cooled to 2° C. was added N-bromosuccinimide (NBS, 58.88 g, 99%, 327.5 mmol, Aldrich B81255) in 4 portions maintaining internal temperature below about 8° C. The reaction mixture was stirred while cooling with an ice-water bath for 30 minutes (NMR of a worked-up aliquot showed complete consumption of starting material). Aqueous 1 N Na2S2O3 (330 mL) was added to the reaction mixture, removed the cold bath and stirred for 20 minutes. The mixture was diluted with EtOAc and the layers were separated. The organic phase was washed with saturated aqueous NaHCO3 (2×), water, brine, dried over MgSO4, filtered through a short plug of silica, eluted with EtOAc, and concentrated under reduced pressure to give (5) as a very dark amber oil (82.25 g, 77-94% HPLC purity). Carried forward without further purification. LCMS (C18 column eluting with 10-90% CH3CN/water gradient over 5 minutes with formic acid modifier) M+1: 242.10 (2.89 min). 1H NMR (300 MHz, CDCl3) δ 7.22 (d, J=2.3 Hz, 1H), 7.16 (dd, J=8.4, 2.3 Hz, 1H), 6.54 (d, J=8.4 Hz, 1H), 4.79-4.73 (m, 1H), 4.15 (s, 2H), 4.10-4.01 (m, 1H), 3.93-3.85 (m, 1H), 2.26-2.13 (m, 1H), 2.12-1.97 (m, 3H) ppm. maintaining internal temperature below about 8° C while cooling with an ice-water bath for 30 minutes (NMR of complete consumption of starting material) Aqueous 1 N Na2S2O3 (330 mL) was added to the reaction mixture removed the cold bath stirred for 20 minutes The mixture was diluted with EtOAc the layers were separated The organic phase was washed with saturated aqueous NaHCO3 (2×), water, brine dried over MgSO4 filtered through a short plug of silica eluted with EtOAc concentrated under reduced pressure

Conditions: temp:0.00; pressure:0.00; stir:; See reaction.notes.procedure_details.

Procedure: To a stirring solution of 2-tetrahydrofuran-2-yl-aniline (4) (53.45 g, 327.5 mmol) in methyl tert-butyl ether (MTBE, 641.4 mL) and acetonitrile (213.8 mL) cooled to 2° C. was added N-bromosuccinimide (58.88 g, 99%, 327.5 mmol, Aldrich B81255) in 4 portions maintaining internal temperature below about 8° C. The reaction mixture was stirred while cooling with an ice-water bath for 30 minutes (NMR of a worked-up aliquot showed complete consumption of starting material). Added aqueous 1 N Na2S2O3 (330 mL), removed the cold bath and stirred for 20 minutes. The mixture was diluted with EtOAc and the layers were separated. The organic phase was washed with saturated aqueous NaHCO3 (2×), water, brine, dried over MgSO4, filtered through a short plug of silica, eluted with EtOAc, and concentrated under reduced pressure to give (5) as a very dark amber oil (82.25 g, 77-94% HPLC purity). Carried forward without further purification. LCMS (C18 column eluting with 10-90% CH3CN/water gradient over 5 minutes with formic acid modifier) M+1: 242.10 (2.89 min). 1H NMR (300 MHz, CDCl3) δ 7.22 (d, J=2.3 Hz, 1H), 7.16 (dd, J=8.4, 2.3 Hz, 1H), 6.54 (d, J=8.4 Hz, 1H), 4.79-4.73 (m, 1H), 4A5 (s, 2H), 4.10-4.01 (m, 1H), 3.93-3.85 (m, 1H), 2.26-2.13 (m, 1H), 2.12-1.97 (m, 3H) ppm. maintaining internal temperature below about 8° C while cooling with an ice-water bath for 30 minutes (NMR of complete consumption of starting material) Added aqueous 1 N Na2S2O3 (330 mL), removed the cold bath stirred for 20 minutes The mixture was diluted with EtOAc the layers were separated The organic phase was washed with saturated aqueous NaHCO3 (2×), water, brine dried over MgSO4 filtered through a short plug of silica eluted with EtOAc concentrated under reduced pressure