3-chloro-4-iodoaniline

Conditions: temp:0.00; pressure:0.00; stir:

Conditions: temp:0.00; pressure:0.00; stir:

Conditions: temp:0.00; pressure:0.00; stir:

Conditions: temp:100.01; pressure:0.00; stir:; See reaction.notes.procedure_details.

Procedure: Following General Procedure AR above and using 3-chloro-4-iodoaniline (Aldrich), N-BOC-3-chloro-4-iodoaniline was prepared. To a stirred slurry of 5.0 equivalents of sodium hydride in DMF was added 1.0 equivalent of N-BOC-3-chloro-4-iodoaniline and then 1.1 equivalents of iso-butyl 2-bromopropionate (from Example AD above) were slowly added. The reaction was heated to 100° C. for 10 hours, cooled, diluted with dichloromethane and washed with cold 1N HCl, water and brine. The solvents were removed at reduced pressure and the residue was chromatographed to provide N-BOC-N-(3-chloro-4-iodophenyl)alanine iso-butyl ester as a clear oil. Following General Procedure AN above, the BOC group was removed from N-BOC-N-(3-chloro-4-iodophenyl)alanine iso-butyl ester to provide the title compound. The BOC-removal reaction was monitored by tlc on silica gel (Rf=0.58 in 30% EtOAc/hexanes) and purification was by preparative plate chromatography (silica gel using 30% EtOAc/hexanes as the eluant). The compound was further purified by chromatography on an HPLC chiral column (Chiralcel OD). was prepared cooled washed with cold 1N HCl, water and brine The solvents were removed at reduced pressure the residue was chromatographed

Conditions: temp:0.00; pressure:0.00; stir:; See reaction.notes.procedure_details.

Procedure: The title compound was prepared as described in Example 159 substituting 3-chloro-4-iodoaniline and (2-chloro-4-methoxyphenyl)boronic acid for 4-bromo-3-chloroaniline and (4-(trifluoromethyl)phenyl)boronic acid, respectively.

Conditions: temp:0.00; pressure:0.00; stir:; See reaction.notes.procedure_details.

Procedure: Ethyl 3-(5-(2-(bromomethyl)-4,5-difluorophenyl)picolinamido)propanoate (1.0 g, 2.3 mmol), 3-chloro-4-iodoaniline (1.2 g, 4.7 mmol), and K2CO3 (647 mg, 4.7 mmol) were diluted with DMF (2.4 mL) and the resulting mixture was stirred at room temperature. After 2 h the resulting mixture directly purified via column chromatography to yield the title compound. After 2 h the resulting mixture directly purified via column chromatography

Conditions: temp:0.00; pressure:0.00; stir:; See reaction.notes.procedure_details.

Procedure: 3-Chloro-4-iodoaniline (3.0 g, 11.8 mmol), (2-methyl-4-(trifluoromethyl)phenyl)boronic acid (2.9 g, 14.2 mmol), Pd(dppf)Cl2 (1.0 g, 1.2 mmol), and K2CO3 (3.3 g, 23.7 mmol) were dissolved in 1,4-dioxane (40 mL) and water (10 mL) and the resulting mixture was heated to 80° C. After 16 h the resulting mixture was cooled to room temperature, diluted with EtOAc, washed with water and brine, dried (Na2SO4), and dry packed onto silica gel. Column chromatography yielded the title compound. washed with water and brine dried (Na2SO4) dry

Conditions: temp:0.00; pressure:0.00; stir:; See reaction.notes.procedure_details.

Procedure: 3-Chloro-4-iodoaniline (3.0 g, 11.8 mmol), (4-chloro-2-methylphenyl)boronic acid (2.4 g, 14.2 mmol), Pd(dppf)Cl2 (1.0 g, 1.2 mmol), and K2CO3 (3.3 g, 23.7 mmol) were dissolved in 1,4-dioxane (40 mL) and water (10 mL) and the resulting mixture was heated to 80° C. After 16 h the resulting mixture was cooled to room temperature, diluted with EtOAc, washed with water and brine, dried (Na2SO4), and dry packed onto silica gel. Column chromatography yielded the title compound. washed with water and brine dried (Na2SO4) dry

Conditions: temp:0.00; pressure:0.00; stir:; See reaction.notes.procedure_details.

Procedure: Solid NaBH(OAc)3 (4.2 g, 19.8 mmol) was added to a DCE solution (45 mL) of ethyl 3-(5-(2-formyl-5-(trifluoromethyl)phenyl)picolinamido)propanoate, prepared as described in Example 22, (3.9 g, 9.9 mmol), 3-chloro-4-iodoaniline (3.0 g, 11.9 mmol), and AcOH (2.8 mL, 49.4 mmol) and the resulting mixture was stirred at room temperature. After 16 h the resulting mixture diluted with EtOAc washed with water and brine, dried (Na2SO4), dry-packed onto silica gel and purified via column chromatography to yield the title compound. prepared washed with water and brine dried (Na2SO4) dry-packed onto silica gel and purified via column chromatography

Conditions: temp:50.01; pressure:0.00; stir:; See reaction.notes.procedure_details.

Procedure: To a deoxygenated solution of 3-chloro-4-iodo-aniline (6.95 g), triphenyl arsine (0.67 g), and tris(dibenzylideneacetone)palladium(O) (0.50 g) in tetrahydrofuran (120 mL) at 50° C. is added tributylvinyltin (10 g) and the mixture is stirred for approximately 15 hours at 50° C. under an atmosphere of argon. The reaction is then cooled, filtered through diatomaceous earth, and the filtrate is evaporated to dryness under reduced pressure. The residue is dissolved in hexanes and then extracted three times with 5% aqueous hydrochloric acid. These aqueous acidic extracts are then basified with solid potassium carbonate and extracted three times with ethyl acetate. These pooled organic extracts are then washed with saturated aqueous sodium chloride, dried over anhydrous magnesium sulfate, and the solvent is removed under reduced pressure. The resulting residue is chromatographed over silica gel (hexanes and then 10% ethyl acetate in hexanes is used as the eluant) to provide the desired product as an amber oil. The reaction is then cooled filtered through diatomaceous earth the filtrate is evaporated to dryness under reduced pressure The residue is dissolved in hexanes extracted three times with 5% aqueous hydrochloric acid extracted three times with ethyl acetate These pooled organic extracts are then washed with saturated aqueous sodium chloride dried over anhydrous magnesium sulfate the solvent is removed under reduced pressure The resulting residue is chromatographed over silica gel (hexanes

Conditions: temp:50.01; pressure:0.00; stir:; See reaction.notes.procedure_details.

Procedure: To a deoxygenated solution of 3-chloro-4-iodo-aniline (6.95 g), triphenyl arsine (0.67 g), and tris(dibenzylideneacetone)palladium(O) (0.50 g) in tetrahydrofuran (120 mL) at 50° C. is added tributylvinyltin (10 g) and the mixture is stirred for approximately 15 hours at 50° C. under an atmosphere of argon. The reaction is then cooled, filtered through diatomaceous earth, and the filtrate is evaporated to dryness under reduced pressure. The residue is dissolved in hexanes and then extracted three times with 5% aqueous hydrochloric acid. These aqueous acidic extracts are then basified with solid potassium carbonate and extracted three times with ethyl acetate. These pooled organic extracts are then washed with saturated aqueous sodium chloride, dried over anhydrous magnesium sulfate, and the solvent is removed under reduced pressure. The resulting residue is chromatographed over silica gel (hexanes and then 10% ethyl acetate in hexanes is used as the eluant) to provide the desired product as an amber oil. The reaction is then cooled filtered through diatomaceous earth the filtrate is evaporated to dryness under reduced pressure The residue is dissolved in hexanes extracted three times with 5% aqueous hydrochloric acid extracted three times with ethyl acetate These pooled organic extracts are then washed with saturated aqueous sodium chloride dried over anhydrous magnesium sulfate the solvent is removed under reduced pressure The resulting residue is chromatographed over silica gel (hexanes

Conditions: temp:100.01; pressure:0.00; stir:; See reaction.notes.procedure_details.

Procedure: Following General Procedure AR above and using 3-chloro-4-iodoaniline (Aldrich), N-BOC-3-chloro-4-iodoaniline was prepared. To a stirred slurry of 5.0 equivalents of sodium hydride in DMF was added 1.0 equivalent of N-BOC-3-chloro-4-iodoaniline and then 1.1 equivalents of iso-butyl 2-bromopropionate (from Example AD above) were slowly added. The reaction was heated to 100° C. for 10 hours, cooled, diluted with dichloromethane and washed with cold 1N HCl, water and brine. The solvents were removed at reduced pressure and the residue was chromatographed to provide N-BOC-N-(3-chloro-4-iodophenyl)alanine iso-butyl ester as a clear oil. Following General Procedure AN above, the BOC group was removed from N-BOC-N-(3-chloro-4-iodophenyl)alanine iso-butyl ester to provide the title compound. The BOC-removal reaction was monitored by tlc on silica gel (Rf=0.58 in 30% EtOAc/hexanes) and purification was by preparative plate chromatography (silica gel using 30% EtOAc/hexanes as the eluant). The compound was further purified by chromatography on an HPLC chiral column (Chiralcel OD). was prepared cooled washed with cold 1N HCl, water and brine The solvents were removed at reduced pressure the residue was chromatographed