dimethyl octadec-9-enedioate

Conditions: temp:0.00; pressure:0.00; stir:

Conditions: temp:0.00; pressure:0.00; stir:

Conditions: temp:0.00; pressure:0.00; stir:

Conditions: temp:0.00; pressure:0.00; stir:

Conditions: temp:60.01; pressure:0.00; stir:; See reaction.notes.procedure_details.

Procedure: A dibasic ester composition is produced in accordance with the exemplary procedure below, including a cross-metathesis reaction between methyl 9-decenoate (9-decenoic acid methyl ester, 9-DAME) and methyl 9-dodecenoate (9-dodecenoic acid methyl ester, 9-DDAME). A 1.0:1.0 mole ratio mixture of 9-DAME and 9-DDAME (332 g) is charged to a 1 L round bottom flask and heated to 60° C. Pressure is adjusted to 100 mg Hg with ChemGlass diaphragm vacuum pump model CG-4812-30/and J-Kem Scientific Digital Vacuum Regulator Model 200 and stirring is initiated with a magnetic stir bar. After the system stabilizes at desired conditions, 80 ppm of C-827 (as toluene solution) is added (t=0 min). At approximately 15-20 min, the reaction starts bubbling vigorously and the pressure rises to approximately 500 mm Hg. Pressure restabilizes at 100 mm Hg after approximately 5-10 more minutes. At 180 min, an additional 40 ppm of the catalyst C-827 (as toluene solution) is added. Subsequently, the catalyst is deactivated with 25 equivalents tris hydroxymethyl phosphine (THMP) to C-827 at 80° C. for 120 min, THMP. The catalyst is then removed by water extraction (5:1 oil to water). The composition is dried with MgSO4. Then, light FAME stripping is conducted at 1 mm Hg and approximately 100° C. The products from this reaction include a large fraction of 18:1 dibasic ester. is charged to a 1 L round bottom flask is initiated with a magnetic stir bar is added (t=0 min) the reaction starts bubbling vigorously At 180 min an additional 40 ppm of the catalyst C-827 (as toluene solution) is added The catalyst is then removed by water extraction (5:1 oil to water) The composition is dried with MgSO4 is conducted at 1 mm Hg and approximately 100° C