2-(oxan-2-yl)ethyl methanesulfonate

Conditions: temp:0.00; pressure:0.00; stir:

Conditions: temp:0.00; pressure:0.00; stir:

Conditions: temp:60.01; pressure:0.00; stir:; See reaction.notes.procedure_details.

Procedure: A mixture of N2-butyl-8-methoxy-9H-purine-2,6-diamine trifluoroacetic acid salt (200 mg) and potassium carbonate (236 mg) in dry DMF (2 mL) were heated at 60° C. with stirring for 1 h. 2-(Tetrahydro-2H-pyran-2-yl)ethyl methanesulfonate (142 mg) was added and the reaction was continued for 3 h at 60° C. The mixture was quenched with water and extracted with EtOAc (×3). The combined organics were washed with water and brine, dried using a hydrophobic frit and evaporated to give crude material (250 mg). The material was purified by C18 reverse phase chromatography using water (containing 0.1% formic acid)-acetonitrile (containing 0.05% formic acid) as eluent (20-60%) and the appropriate fractions combined and evaporated to remove acetonitrile. The remaining aqueous mixture was made basic with saturated sodium hydrogen carbonate, extracted three times with dichloromethane and the combined extracts dried by passing through a phase separation cartridge then evaporated to give 75 mg of material which was recrystallised from ether/light petrol yielding the title compound as a solid, 54 mg. the reaction was continued for 3 h at 60° C The mixture was quenched with water extracted with EtOAc (×3) The combined organics were washed with water and brine dried evaporated to give crude material (250 mg) The material was purified by C18 reverse phase chromatography evaporated to remove acetonitrile extracted three times with dichloromethane the combined extracts dried by passing through a phase separation cartridge then evaporated

Conditions: temp:60.01; pressure:0.00; stir:; See reaction.notes.procedure_details.

Procedure: A mixture of N2-butyl-8-methoxy-9H-purine-2,6-diamine trifluoroacetic acid salt (200 mg) and potassium carbonate (236 mg) in dry DMF (2 mL) were heated at 60° C. with stirring for 1 h. 2-(Tetrahydro-2H-pyran-2-yl)ethyl methanesulfonate (142 mg) was added and the reaction was continued for 3 h at 60° C. The mixture was quenched with water and extracted with EtOAc (×3). The combined organics were washed with water and brine, dried using a hydrophobic frit and evaporated to give crude material (250 mg). The material was purified by C18 reverse phase chromatography using water (containing 0.1% formic acid)-acetonitrile (containing 0.05% formic acid) as eluent (20-60%) and the appropriate fractions combined and evaporated to remove acetonitrile. The remaining aqueous mixture was made basic with saturated sodium hydrogen carbonate, extracted three times with dichloromethane and the combined extracts dried by passing through a phase separation cartridge then evaporated to give 75 mg of material which was recrystallised from ether/light petrol yielding the title compound as a solid, 54 mg. the reaction was continued for 3 h at 60° C The mixture was quenched with water extracted with EtOAc (×3) The combined organics were washed with water and brine dried evaporated to give crude material (250 mg) The material was purified by C18 reverse phase chromatography evaporated to remove acetonitrile extracted three times with dichloromethane the combined extracts dried by passing through a phase separation cartridge then evaporated

Conditions: temp:60.01; pressure:0.00; stir:; See reaction.notes.procedure_details.

Procedure: A mixture of 2-butoxy-8-methoxy-9H-purin-6-amine trifluoroacetate salt (200 mg) and potassium carbonate (236 mg) in dry DMF (2 mL) were heated at 60° C. with stirring for 1 h. 2-(Tetrahydro-2H-pyran-2-yl)ethyl methanesulfonate (142 mg) was added and the reaction was continued for 16 h at 60° C. The mixture was quenched with water and extracted with EtOAc (×3). The combined organics were washed with water and brine, dried using a hydrophobic frit and evaporated to give crude material (540 mg). The material was purified by normal phase chromatography (ISCO) using 0-20% methanol/EtOAc as eluent to give the title compound as a white solid (88 mg). the reaction was continued for 16 h at 60° C The mixture was quenched with water extracted with EtOAc (×3) The combined organics were washed with water and brine dried evaporated to give crude material (540 mg) The material was purified by normal phase chromatography (ISCO)

Conditions: temp:60.01; pressure:0.00; stir:; See reaction.notes.procedure_details.

Procedure: A mixture of 2-butoxy-8-methoxy-9H-purin-6-amine trifluoroacetate salt (200 mg) and potassium carbonate (236 mg) in dry DMF (2 mL) were heated at 60° C. with stirring for 1 h. 2-(Tetrahydro-2H-pyran-2-yl)ethyl methanesulfonate (142 mg) was added and the reaction was continued for 16 h at 60° C. The mixture was quenched with water and extracted with EtOAc (×3). The combined organics were washed with water and brine, dried using a hydrophobic frit and evaporated to give crude material (540 mg). The material was purified by normal phase chromatography (ISCO) using 0-20% methanol/EtOAc as eluent to give the title compound as a white solid (88 mg). the reaction was continued for 16 h at 60° C The mixture was quenched with water extracted with EtOAc (×3) The combined organics were washed with water and brine dried evaporated to give crude material (540 mg) The material was purified by normal phase chromatography (ISCO)

Conditions: temp:0.00; pressure:0.00; stir:; See reaction.notes.procedure_details.

Procedure: 2-(Tetrahydro-2H-pyran-2-yl)ethanol (465 mg) was dissolved in dry DCM (10 mL) and triethylamine (996 mg) was added. The stirred solution was cooled in an ice bath under nitrogen and methanesulphonyl chloride (359 mg) was added dropwise over 5 mins. The reaction was allowed to warm to room temperature as the ice bath melted and was left for 16 h. The mixture was then shaken with saturated sodium bicarbonate solution and the aqueous layer was extracted with DCM (×2). The combined organic extracts were washed with brine, dried using a hydrophobic frit and evaporated to give the title compound as a brown oil (718 mg). The stirred solution was cooled in an ice bath under nitrogen the aqueous layer was extracted with DCM (×2) The combined organic extracts were washed with brine dried evaporated

Conditions: temp:0.00; pressure:0.00; stir:

Conditions: temp:60.01; pressure:0.00; stir:; See reaction.notes.procedure_details.

Procedure: A mixture of 2-butoxy-8-methoxy-9H-purin-6-amine trifluoroacetate salt (200 mg) and potassium carbonate (236 mg) in dry DMF (2 mL) were heated at 60° C. with stirring for 1 h. 2-(Tetrahydro-2H-pyran-2-yl)ethyl methanesulfonate (142 mg) was added and the reaction was continued for 16 h at 60° C. The mixture was quenched with water and extracted with EtOAc (×3). The combined organics were washed with water and brine, dried using a hydrophobic frit and evaporated to give crude material (540 mg). The material was purified by normal phase chromatography (ISCO) using 0-20% methanol/EtOAc as eluent to give the title compound as a white solid (88 mg). the reaction was continued for 16 h at 60° C The mixture was quenched with water extracted with EtOAc (×3) The combined organics were washed with water and brine dried evaporated to give crude material (540 mg) The material was purified by normal phase chromatography (ISCO)

Conditions: temp:0.00; pressure:0.00; stir:; See reaction.notes.procedure_details.

Procedure: 2-(Tetrahydro-2H-pyran-2-yl)ethanol (465 mg) was dissolved in dry DCM (10 mL) and triethylamine (996 mg) was added. The stirred solution was cooled in an ice bath under nitrogen and methanesulphonyl chloride (359 mg) was added dropwise over 5 mins. The reaction was allowed to warm to room temperature as the ice bath melted and was left for 16 h. The mixture was then shaken with saturated sodium bicarbonate solution and the aqueous layer was extracted with DCM (×2). The combined organic extracts were washed with brine, dried using a hydrophobic frit and evaporated to give the title compound as a brown oil (718 mg). The stirred solution was cooled in an ice bath under nitrogen the aqueous layer was extracted with DCM (×2) The combined organic extracts were washed with brine dried evaporated

Conditions: temp:60.01; pressure:0.00; stir:; See reaction.notes.procedure_details.

Procedure: A mixture of N2-butyl-8-methoxy-9H-purine-2,6-diamine trifluoroacetic acid salt (200 mg) and potassium carbonate (236 mg) in dry DMF (2 mL) were heated at 60° C. with stirring for 1 h. 2-(Tetrahydro-2H-pyran-2-yl)ethyl methanesulfonate (142 mg) was added and the reaction was continued for 3 h at 60° C. The mixture was quenched with water and extracted with EtOAc (×3). The combined organics were washed with water and brine, dried using a hydrophobic frit and evaporated to give crude material (250 mg). The material was purified by C18 reverse phase chromatography using water (containing 0.1% formic acid)-acetonitrile (containing 0.05% formic acid) as eluent (20-60%) and the appropriate fractions combined and evaporated to remove acetonitrile. The remaining aqueous mixture was made basic with saturated sodium hydrogen carbonate, extracted three times with dichloromethane and the combined extracts dried by passing through a phase separation cartridge then evaporated to give 75 mg of material which was recrystallised from ether/light petrol yielding the title compound as a solid, 54 mg. the reaction was continued for 3 h at 60° C The mixture was quenched with water extracted with EtOAc (×3) The combined organics were washed with water and brine dried evaporated to give crude material (250 mg) The material was purified by C18 reverse phase chromatography evaporated to remove acetonitrile extracted three times with dichloromethane the combined extracts dried by passing through a phase separation cartridge then evaporated