[4-(ethenoxymethyl)cyclohexyl]methanol

Conditions: temp:0.00; pressure:0.00; stir:

Conditions: temp:0.00; pressure:0.00; stir:; See reaction.notes.procedure_details.

Procedure: Hexafluoropropene (264 g, 1.76 mol) was added dropwise to a mechanically stirred mixture of 1,4-cyclohexanedimethanol vinyl ether (300 g, 1.76 mol), acetonitrile (600 mL), and K2CO3 (121 g, 0.88 mol), at 0° C. under N2. The reaction flask was placed in an ice bath to moderate the exothermic reaction during the addition of hexafluoropropene. After complete addition of hexafluoropropene, the reaction mixture was stirred for an additional hour at room temperature and filtered. The filtrate was added to 1.5 L water and mixed well. The lower layer formed was separated, washed with water (3×300 mL), and concentrated under reduced pressure (approximately 0.05 mm Hg) to afford 1,1,2,3,3,3-hexafluoro-1-{[4(vinyloxymethyl)cyclohexyl]methoxy}propane(cis/trans mixture) as a colorless liquid (428 g, 76% yield); b.p. 55-60° C./0.05 mm Hg; Refractive Index 1.4145 at 23.7° C.; GC/MS: m/z at 320 for M+; 19F and 1H NMR spectral data are consistent with the structure. The reaction flask was placed in an ice bath the exothermic reaction filtered The filtrate was added to 1.5 L water mixed well The lower layer formed was separated washed with water (3×300 mL) concentrated under reduced pressure (approximately 0.05 mm Hg)

Conditions: temp:30.01; pressure:0.00; stir:; See reaction.notes.procedure_details.

Procedure: Into a 450 mL capacity PARR® reactor, 1,.4-cyclohexanedimethanol vinyl ether (50 g, 294 mmol), acetonitrile (100 mL), and Cs2CO3 (2 g, 6 mmol) were added. The PARR® reactor was cooled to ˜30° C., partially evacuated and chlorotrifluoroethylene (34 g, 294 mmol) was condensed and the resultant mixture was heated at ˜50-60° C with stirring for 3 hours. After this, the PARR® reactor was cooled to room temperature, vented in the fume hood and the reaction mixture was poured into ˜150 mL water and the lower layer containing the crude product separated, and was concentrated under reduced pressure 0.05 mmHg) at 25-30° C. to afford the desired product as a colorless viscous liquid (49 g, 58% yield) which is a mixture of cis/trans isomers in the ratio 73:18; refractive index of 1.415 at 23.7° C.; GC/MS (EI mode): m/z at 286 for M+; 19F and 1H NMR spectral data are consistent with the structure. partially evacuated condensed After this, the PARR® reactor was cooled to room temperature separated was concentrated under reduced pressure 0.05 mmHg) at 25-30° C.

Conditions: temp:0.01; pressure:0.00; stir:; See reaction.notes.procedure_details.

Procedure: 4-[(Vinyloxy)methyl]cyclohexylmethanol (2.0 g, 0.010 mol) was dissolved in chloroform (20 mL), cooled to 0° C., and then methanesulfonyl chloride (0.85 mL, 0.011 mol) and triethylamine (1.5 mL, 0.011 mol) were added. The reaction was stirred at 0° C. for 2 hours. The reaction was extracted with ethyl acetate, and the extracts were washed with water, brine, and then dried over MgSO4 and concentrated. The product was purified via column chromatography on silica gel (40% ethyl acetate, 60% hexanes), to give 1.53 g of the desired product as a 3:1 mixture of the two diastereomers. 1H NMR (400 MHz, CDCl3): δ 6.36-6.41 (m, 1H), 4.04-4.10 (m, 2H), 3.94-3.96 (m, 2H), 3.39-3.43 (m, 2H), 2.92 (s, 3H), 0.90-1.80 (m, 10H) (major diastereomer). The reaction was extracted with ethyl acetate the extracts were washed with water, brine dried over MgSO4 concentrated The product was purified via column chromatography on silica gel (40% ethyl acetate, 60% hexanes)

Conditions: temp:0.01; pressure:0.00; stir:; See reaction.notes.procedure_details.

Procedure: 4-[(Vinyloxy)methyl]cyclohexylmethanol (2.0 g, 0.010 mol) was dissolved in chloroform (20 mL), cooled to 0° C., and then methanesulfonyl chloride (0.85 mL, 0.011 mol) and triethylamine (1.5 mL, 0.011 mol) were added. The reaction was stirred at 0° C. for 2 hours. The reaction was extracted with ethyl acetate, and the extracts were washed with water, brine, and then dried over MgSO4 and concentrated. The product was purified via column chromatography on silica gel (40% ethyl acetate, 60% hexanes), to give 1.53 g of the desired product as a 3:1 mixture of the two diastereomers. 1H NMR (400 MHz, CDCl3): δ 6.36-6.41 (m, 1H), 4.04-4.10 (m, 2H), 3.94-3.96 (m, 2H), 3.39-3.43 (m, 2H), 2.92 (s, 3H), 0.90-1.80 (m, 10H) (major diastereomer). The reaction was extracted with ethyl acetate the extracts were washed with water, brine dried over MgSO4 concentrated The product was purified via column chromatography on silica gel (40% ethyl acetate, 60% hexanes)

Conditions: temp:0.00; pressure:0.00; stir:; See reaction.notes.procedure_details.

Procedure: Hexafluoropropene (264 g, 1.76 mol) was added dropwise to a mechanically stirred mixture of 1,4-cyclohexanedimethanol vinyl ether (300 g, 1.76 mol), acetonitrile (600 mL), and K2CO3 (121 g, 0.88 mol), at 0° C. under N2. The reaction flask was placed in an ice bath to moderate the exothermic reaction during the addition of hexafluoropropene. After complete addition of hexafluoropropene, the reaction mixture was stirred for an additional hour at room temperature and filtered. The filtrate was added to 1.5 L water and mixed well. The lower layer formed was separated, washed with water (3×300 mL), and concentrated under reduced pressure (approximately 0.05 mm Hg) to afford 1,1,2,3,3,3-hexafluoro-1-{[4 (vinyloxymethyl)cyclo-hexyl]methoxy} propane(cis/trans mixture) as a colorless liquid (428 g, 76% yield); b.p. 55-60° C./0.05 mm Hg; Refractive Index 1.4145 at 23.7° C.; GC/MS: m/z at 320 for M+; 19F and 1H NMR spectral data are consistent with the structure. The reaction flask was placed in an ice bath the exothermic reaction filtered The filtrate was added to 1.5 L water mixed well The lower layer formed was separated washed with water (3×300 mL) concentrated under reduced pressure (approximately 0.05 mm Hg)

Conditions: temp:0.00; pressure:0.00; stir:; See reaction.notes.procedure_details.

Procedure: Hexafluoropropene (264 g, 1.76 mol) was added dropwise to a mechanically stirred mixture of 1,4-cyclohexanedimethanol vinyl ether (300 g, 1.76 mol), acetonitrile (600 mL), and K2CO3 (121 g, 0.88 mol), at 0° C. under N2. The reaction flask was placed in an ice bath to moderate the exothermic reaction during the addition of hexafluoropropene. After complete addition of hexafluoropropene, the reaction mixture was stirred for an additional hour at room temperature and filtered. The filtrate was added to 1.5 L water and mixed well. The lower layer formed was separated, washed with water (3×300 mL), and concentrated under reduced pressure (approximately 0.05 mm Hg) to afford 1,1,2,3,3,3-hexafluoro-1-{[4(vinyloxymethyl)cyclohexyl]methoxy}propane(cis/trans mixture) as a colorless liquid (428 g, 76% yield); b.p. 55-60° C./0.05 mm Hg; Refractive Index 1.4145 at 23.7° C.; GC/MS: m/z at 320 for M+; 19F and 1H NMR spectral data are consistent with the structure. The reaction flask was placed in an ice bath the exothermic reaction filtered The filtrate was added to 1.5 L water mixed well The lower layer formed was separated washed with water (3×300 mL) concentrated under reduced pressure (approximately 0.05 mm Hg)

Conditions: temp:30.01; pressure:0.00; stir:; See reaction.notes.procedure_details.

Procedure: Into a 450 mL capacity PARR® reactor, 1,.4-cyclohexanedimethanol vinyl ether (50 g, 294 mmol), acetonitrile (100 mL), and Cs2CO3 (2 g, 6 mmol) were added. The PARR® reactor was cooled to ˜30° C., partially evacuated and chlorotrifluoroethylene (34 g, 294 mmol) was condensed and the resultant mixture was heated at ˜50-60° C with stirring for 3 hours. After this, the PARR® reactor was cooled to room temperature, vented in the fume hood and the reaction mixture was poured into ˜150 mL water and the lower layer containing the crude product separated, and was concentrated under reduced pressure 0.05 mmHg) at 25-30° C. to afford the desired product as a colorless viscous liquid (49 g, 58% yield) which is a mixture of cis/trans isomers in the ratio 73:18; refractive index of 1.415 at 23.7° C.; GC/MS (EI mode): m/z at 286 for M+; 19F and 1H NMR spectral data are consistent with the structure. partially evacuated condensed After this, the PARR® reactor was cooled to room temperature separated was concentrated under reduced pressure 0.05 mmHg) at 25-30° C.

Conditions: temp:30.01; pressure:0.00; stir:; See reaction.notes.procedure_details.

Procedure: Into a 450 mL capacity PARR® reactor, 1,.4-cyclohexanedimethanol vinyl ether (50 g, 294 mmol), acetonitrile (100 mL), and Cs2CO3 (2 g, 6 mmol) were added. The PARR® reactor was cooled to ˜30° C., partially evacuated and chlorotrifluoroethylene (34 g, 294 mmol) was condensed and the resultant mixture was heated at ˜50-60° C with stirring for 3 hours. After this, the PARR® reactor was cooled to room temperature, vented in the fume hood and the reaction mixture was poured into ˜150 mL water and the lower layer containing the crude product separated, and was concentrated under reduced pressure 0.05 mmHg) at 25-30° C. to afford the desired product as a colorless viscous liquid (49 g, 58% yield) which is a mixture of cis/trans isomers in the ratio 73:18; refractive index of 1.415 at 23.7° C.; GC/MS (EI mode): m/z at 286 for M+; 19F and 1H NMR spectral data are consistent with the structure. partially evacuated condensed After this, the PARR® reactor was cooled to room temperature separated was concentrated under reduced pressure 0.05 mmHg) at 25-30° C.

Conditions: temp:0.00; pressure:0.00; stir:

Conditions: temp:0.01; pressure:0.00; stir:; See reaction.notes.procedure_details.

Procedure: 4-[(Vinyloxy)methyl]cyclohexylmethanol (2.0 g, 0.010 mol) was dissolved in chloroform (20 mL), cooled to 0° C., and then methanesulfonyl chloride (0.85 mL, 0.011 mol) and triethylamine (1.5 mL, 0.011 mol) were added. The reaction was stirred at 0° C. for 2 hours. The reaction was extracted with ethyl acetate, and the extracts were washed with water, brine, and then dried over MgSO4 and concentrated. The product was purified via column chromatography on silica gel (40% ethyl acetate, 60% hexanes), to give 1.53 g of the desired product as a 3:1 mixture of the two diastereomers. 1H NMR (400 MHz, CDCl3): δ 6.36-6.41 (m, 1H), 4.04-4.10 (m, 2H), 3.94-3.96 (m, 2H), 3.39-3.43 (m, 2H), 2.92 (s, 3H), 0.90-1.80 (m, 10 H) (major diastereomer). The reaction was extracted with ethyl acetate the extracts were washed with water, brine dried over MgSO4 concentrated The product was purified via column chromatography on silica gel (40% ethyl acetate, 60% hexanes)

Conditions: temp:30.01; pressure:0.00; stir:; See reaction.notes.procedure_details.

Procedure: Into a 450 mL capacity PARR® reactor, 1,4-cyclohexanedimethanol vinyl ether (50 g, 294 mmol), acetonitrile (100 mL), and Cs2CO3 (2 g, 6 mmol) were added. The PARR® reactor was cooled to ˜30° C., partially evacuated and chlorotrifluoroethylene (34 g, 294 mmol) was condensed and the resultant mixture was heated at ˜50-60° C. with stirring for 3 hours. After this, the PARR® reactor was cooled to room temperature, vented in the fume hood and the reaction mixture was poured into ˜150 mL water and the lower layer containing the crude product separated, and was concentrated under reduced pressure 0.05 mmHg) at 25-30° C. to afford the desired product as a colorless viscous liquid (49 g, 58% yield) which is a mixture of cis/trans isomers in the ratio 73:18; refractive index of 1.415 at 23.7° C,; GC/MS (EI mode): m/z at 286 for M+; 19F and 1H NMR spectral data are consistent with the structure. partially evacuated condensed After this, the PARR® reactor was cooled to room temperature separated was concentrated under reduced pressure 0.05 mmHg) at 25-30° C.